Search NASA⌕ Search

Engineering topics

Aydelott, John C.

Publications and source records attributed to Aydelott, John C..

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

On-Orbit Propellant Motion Resulting from an Impulsive Acceleration

In-space docking and separation maneuvers of spacecraft that have large fluid mass fractions may cause undesirable spacecraft motion in response to the impulsive-acceleration-induced fluid motion. An example of this potential low-gravity fluid management problem arose during the development of the shuttle/Centaur vehicle. Experimentally verified numerical modeling techniques were developed to establish the propellant dynamics, and subsequent vehicle motion, associated with the separation of the Centaur vehicle from the shuttle cargo bay. Although the shuttle/Centaur development activity has been suspended, the numerical modeling techniques are available to predict on-orbit liquid motion resulting from impulsive accelerations for other missions and spacecraft.

Hochstein, John I.↗
NASA NTRS1993

Analysis Of Transfer Of Cryogens In Low Gravity

Report discusses calculations of thermodynamic aspects of refilling tanks with cryogenic liquids in low or zero gravity. Calculations required to design prototype system resupplying cryogenic propellant liquids to re-usable spacecraft not returning to Earth. Equations and computer programs developed for thermodynamic analysis used to extrapolate important design information from orbiting small-scale versions of system.

Defelice, David M.↗
NASA NTRS1990

Prediction of self-pressurization rate of cryogenic propellant tankage

The SOLA-ECLIPSE code is being developed to enable prediction of the behavior of cryogenic propellants in spacecraft tankage. A brief description of the formulations used for modeling heat transfer and for determining the thermodynamic state is presented. Code performance is verified through comparison to experimental data for the self-pressurization of scale-model liquid hydrogen tanks. SOLA-ECLIPSE is used to examine the effect of initial subcooling of the liquid phase on the self-pressurization rate of an on-orbit full-scale liquid hydrogen tank typical for a chemical-propulsion orbit transfer vehicle. The computational predictions show that even small amounts of subcooling will significantly decrease the self-pressurization rate. Further, if the cooling is provided by a thermodynamic vent system, it is concluded that small levels of subcooling will maximize propellant conservation.

Hochstein, John I.↗
NASA NTRS1990

Evaluation of supercritical cryogen storage and transfer systems for future NASA missions

Conceptual designs of Space Transportation Vehicles (STV), and their orbital servicing facilities, that utilize supercritical, single phase, cryogenic propellant were established and compared with conventional subcritical, two phases, STV concepts. The analytical study was motivated by the desire to avoid fluid management problems associated with the storage, acquisition and transfer of subcritical liquid oxygen and hydrogen propellants in the low gravity environment of space. Although feasible, the supercritical concepts suffer from STV weight penalties and propellant resupply system power requirements which make the concepts impractical.

Arif, Hugh↗
NASA NTRS1990

Orbital storage and supply of subcritical liquid nitrogen

Subcritical cryogenic fluid management has long been recognized as an enabling technology for key propulsion applications, such as space transfer vehicles (STV) and the on-orbit cryogenic fuel depots which will provide STV servicing capability. The LeRC Cryogenic Fluids Technology Office (CFTO), under the sponsorship of OAST, has the responsibility of developing the required technology via a balanced program involving analytical modeling, ground based testing, and in-space experimentation. Topics covered in viewgraph form include: cryogenic management technologies; nitrogen storage and supply; cryogenic nitrogen cooling capability; and LN2 system demonstration technical objectives.

Aydelott, John C.↗
NASA NTRS1989

Evaluation of supercritical cryogen storage and transfer systems for future NASA missions

Conceptual designs of Space Transportation Vehicles (STV), and their orbital servicing facilities, that utilize supercritical, single phase, cryogenic propellants were established and compared with conventional subcritical, two phase, STV concepts. The analytical study was motivated by the desire to avoid fluid management problems associated with the storage, acquisition and transfer of subcritical liquid oxygen and hydrogen propellants in the low gravity environment of space. Although feasible, the supercritical concepts suffer from STV weight penalties and propellant resupply system power requirements which make the concepts impractical.

Arif, Hugh↗
NASA NTRS1987

Cryogenic Fluid Management Technology Workshop. Volume 1: Presentation material and discussion

The major objective of the workshop was to identify future NASA needs for technology that will allow the management of subcritical cryogenic fluids in the low gravity space environment. Workshop participants were asked to identify those technologies which will require in-space experimentation and are thus candidates for inclusion in the flight experiment being defined at the Lewis Research Center.

Aydelott, John C.↗
NASA NTRS1987

Thermodynamic analysis and subscale modeling of space-based orbit transfer vehicle cryogenic propellant resupply

The resupply of the cryogenic propellants is an enabling technology for spacebased orbit transfer vehicles. As part of the NASA Lewis ongoing efforts in microgravity fluid management, thermodynamic analysis and subscale modeling techniques were developed to support an on-orbit test bed for cryogenic fluid management technologies. Analytical results have shown that subscale experimental modeling of liquid resupply can be used to validate analytical models when the appropriate target temperature is selected to relate the model to its prototype system. Further analyses were used to develop a thermodynamic model of the tank chilldown process which is required prior to the no-vent fill operation. These efforts were incorporated into two FORTRAN programs which were used to present preliminary analyticl results.

Defelice, David M.↗
NASA NTRS1987

Numerical modeling of on-orbit propellant motion resulting from an impulsive acceleration

In-space docking and separation maneuvers of spacecraft that have large fluid mass fractions may cause undesirable spacecraft motion in response to the impulsive-acceleration-induced fluid motion. An example of this potential low gravity fluid management problem arose during the development of the shuttle/Centaur vehicle. Experimentally verified numerical modeling techniques were developed to establish the propellant dynamics, and subsequent vehicle motion, associated with the separation of the Centaur vehicle from the shuttle orbiter cargo bay. Although the shuttle/Centaur development activity was suspended, the numerical modeling techniques are available to predict on-orbit liquid motion resulting from impulsive accelerations for other missions and spacecraft.

Aydelott, John C.↗
NASA NTRS1986

Thermodynamic analysis and subscale modeling of space-based orbit transfer vehicle cryogenic propellant resupply

The resupply of the cryogenic propellants is an enabling technology for spacebased orbit transfer vehicles. As part of the NASA Lewis ongoing efforts in microgravity fluid management, thermodynamic analysis and subscale modeling techniques were developed to support an on-orbit test bed for cryogenic fluid management technologies. Analytical results have shown that subscale experimental modeling of liquid resupply can be used to validate analytical models when the appropriate target temperature is selected to relate the model to its prototype system. Further analyses were used to develop a thermodynamic model of the tank chilldown process which is required prior to the no-vent fill operation. These efforts were incorporated into two FORTRAN programs which were used to present preliminary analytical results.

Defelice, David M.↗
NASA NTRS1986

Numerical modeling of on-orbit propellant motion resulting from an impulsive acceleration

In-space docking and separation maneuvers of spacecraft that have large fluid mass fractions may cause undersirable spacecraft motion in response to the impulsive-acceleration-induced fluid motion. An example of this potential low gravity fluid management problem arose during the development of the shuttle/Centaur vehicle. Experimentally verified numerical modeling techniques were developed to establish the propellant dynamics, and subsequent vehicle motion, associated with the separation of the Centaur vehicle from the shuttle orbiter cargo bay. Although the shuttle/Centaur development activity was suspended, the numerical modeling techniques are available to predict on-orbit liquid motion resulting from impulsive accelerations for other missions and spacecraft.

Aydelott, John C.↗