Engineering topics
Babucci, Melike
Publications and source records attributed to Babucci, Melike.
Dehydrogenation of Propane and n -Butane Catalyzed by Isolated PtZn 4 Sites Supported on Self-Pillared Zeolite Pentasil Nanosheets
Propene and 1,3-butadiene are important building-block chemicals that can be produced by dehydrogenation of propane and butane over Pt catalysts. The challenge is to develop highly active and selective catalysts that are resistant to deactivation by Pt sintering and coke formation. We have recently shown that these objectives can be met for propane dehydrogenation using atomically dispersed Pt atoms anchored to neighboring ≡SiOZn-OH groups bonded to the framework dealuminated zeolite BEA. In the present study, we demonstrate that significantly superior performance can be achieved by using self-pillared pentasil (SPP) zeolite nanosheets. Following catalyst reduction in H 2 , atomic-resolution, scanning transmission electron microscopy (STEM) and X-ray absorption spectroscopy (XAS) indicate that Pt is stabilized in structures well approximated as (≡Si-O-Zn) 4-5 Pt. These species are highly active, selective, and stable for propane dehydrogenation (PDH) to give propene and for n-butane dehydrogenation (BDH) to give 1,3-butadiene. No catalyst deactivation was observed after 12 days of time on stream, and the selectivity remained at nearly 100% for PDH conducted at 823 K and a weight hourly space velocity (WHSV) of 1,350 h -1 . The apparent rate coefficient for PDH over this catalyst is significantly higher than that reported previously for Pt-containing catalysts. For BDH at 823 K and a WHSV of 3560 h -1 , the selectivity to butene isomers and 1,3-butadiene is 98.9%, and the selectivity to 1,3-butadiene is 45%. Here, we propose that the high catalyst stability observed during PDH and BDH is a consequence of a large fraction of the Pt-containing centers being located on the external surface of the zeolite nanosheets, where nascent coke precursors can desorb before condensing to form coke.
Iridium pair sites anchored to Zr 6 O 8 nodes of the metal–organic framework UiO-66 catalyze ethylene hydrogenation
Isolated metal pair sites on metal oxide and zeolite supports are drawing attention as catalysts, because—in contrast to single atomically dispersed metals—they provide neighboring metal centers that can act cooperatively. We now report pairs of iridium atoms anchored to the Zr 6 O 8 nodes of the metal–organic framework (MOF) UiO-66, synthesized by chemisorption of Ir 2 (μ-OCH 3 ) 2 (COD) 2 (COD is cyclooctadienyl) followed by removal of the COD ligands. The supported species were characterized with infrared spectra of adsorbed CO combined with iridium LIII-edge extended X-ray absorption fine structure and high-energy-resolution fluorescence detection X-ray absorption near edge (HERFD XANES) spectra. The HERFD XANES spectra were recorded with the sample in a variety of atmospheres in which the iridium pair sites were stable, including CO, H 2 , and C 2 H 4 + H 2 at temperatures in the range of 35–80 °C. The data provide sensitive measures of the electronic structure of the iridium in the pair sites. The samples were evaluated as catalysts for ethylene hydrogenation, with the pair-sites being more selective for hydrogenation than analogous isolated atomically dispersed iridium, which catalyzes both hydrogenation and isomerization. Metal pair sites on MOFs offer uncharted opportunities for catalysts having reactivities associated with neighboring metal centers.
Dialing in Catalytic Sites on Metal Organic Framework Nodes: MIL-53(Al) and MIL-68(Al) Probed with Methanol Dehydration Catalysis
Many metal organic frameworks (MOFs) incorporate metal oxide clusters as nodes. Node sites where linkers are missing can be catalytic sites. We now show how to dial in the number and occupancy of such sites in MIL-53 and MIL-68, which incorporate aluminum-oxide-like nodes. Here, the methods involve modulators used in synthesis and postsynthesis reactions to control the modulator-derived groups on these sites. We illustrate the methods using formic acid as a modulator, giving formate ligands on the sites, and these can be removed to leave μ 2 -OH groups and open Lewis acid sites. Methanol dehydration was used as a catalytic reaction to probe these sites, with infrared spectra giving evidence of methoxide ligands as reaction intermediates. Control of node surface chemistry opens the door for placement of a variety of ligands on a wide range of metal oxide cluster nodes for dialing in reactivity and catalytic properties of a potentially immense class of structurally well-defined materials.
Atomically Dispersed Metals on Well-Defined Supports including Zeolites and Metal–Organic Frameworks: Structure, Bonding, Reactivity, and Catalysis
When metals in supported catalysts are atomically dispersed, they are usually cationic and bonded chemically to supports. Investigations of noble metals in this class are growing rapidly, leading to discoveries of catalysts with new properties. Characterization of these materials is challenging because the metal atoms reside on surfaces that are typically nonuniform in composition and structure. We posit that understanding of structures and catalytic properties of these materials is emerging most strongly from investigations of structurally uniform catalysts (metal atoms dispersed on crystalline supports) which can be characterized incisively with atomic-resolution electron microscopy, X-ray absorption spectroscopy, and infrared spectroscopy, bolstered by density functional theory. We assess the literature of such catalysts supported on zeotype materials, metal–organic frameworks, and covalent organic frameworks. Finally, assessing characterization, reactivity, and catalytic performance of catalysts for oxidation, hydrogenation, the water–gas shift reaction, and others, we consider metal–support interactions and ligand effects for various metal–support combinations, evaluating the degree of structural uniformity of exemplary catalysts and summarizing structure–reactivity and structure–catalytic property relationships.
Electronic Structure of Atomically Dispersed Supported Iridium Catalyst Controls Iridium Aggregation
Supported iridium complexes, Ir(C 2 H 4 ) 2 /support, were characterized by X-ray absorption spectroscopy during a temperature ramp to 120 °C in flowing H 2 . Iridium in complexes bonded to weak and moderate electron-donor supports, SiO 2 and γ-Al 2 O 3 , underwent aggregation, forming nanoparticles and clusters, respectively. When the support was a strong electron-donor (MgO), iridium remained site-isolated. Density functional theory calculations confirm the dependence of iridium–support bond strength on the support’s electron-donor character. Coating the SiO 2 -supported complexes with 1-n-ethyl-3-methyl-imidazolium acetate enhanced electron density on the iridium, hindering its aggregation. Finally, these results demonstrate opportunities for stabilizing atomically dispersed supported noble metals under reducing conditions by choice of support/ionic liquid sheath combinations.
The Surface Chemistry of Metal Oxide Clusters: From Metal–Organic Frameworks to Minerals
Not Available
Unraveling the individual influences of supports and ionic liquid coatings on the catalytic properties of supported iridium complexes and iridium clusters
In this work, supported iridium complexes were synthesized by the reaction of Ir(CO) 2 (acac) (acac = acetylacetonato) with SiO 2 , γ-Al 2 O 3 , and MgO. Extended X-ray absorption fine structure (EXAFS) and infrared (IR) spectra demonstrate that the iridium was present as atomically dispersed species anchored to each support. The samples were treated in flowing H 2 at 673 K to form supported iridium clusters. EXAFS spectra and high-angle annular dark-field scanning transmission electron microscopy images demonstrate that the average diameter of the iridium clusters on each support was approximately 1.2 nm. Furthermore, the catalysts before and after cluster formation were coated with each of a family of 1,3-dialkylimidazolium ionic liquids (ILs) having varying electron-donor tendencies probed by their υ(C2H) frequencies determined by IR spectroscopy. The coated and uncoated samples were tested as catalysts for partial hydrogenation of 1,3-butadiene in a flow reactor at 333 K, with turnover frequencies determined from differential conversions. The individual influences of the IL coatings and supports on the catalyst performance were found to depend strongly on whether the iridium was site-isolated complexes or present in clusters. The IL coatings as ligands exerted dominant effects on the clusters as catalysts, whereas the supports exerted dominant effects on the isolated iridium atoms. The results indicate how to tune the effects of metal nuclearity, IL coatings, and supports on the electronic environments and catalytic properties of the metals.
Tuning Catalytic Sites on Zr 6 O 8 Metal–Organic Framework Nodes via Ligand and Defect Chemistry Probed with tert -Butyl Alcohol Dehydration to Isobutylene
Metal–organic frameworks (MOFs) have drawn wide attention as candidate catalysts, but some essential questions about their nature and performance have barely been addressed. (1) How do OH groups on MOF nodes act as catalytic sites? (2) What are the relationships among these groups, node defects, and MOF stability, and how do reaction conditions influence them? (3) What are the interplays between catalytic properties and transport limitations? To address these questions, we report an experimental and theoretical investigation of the catalytic dehydration of tert -butyl alcohol (TBA) used to probe the activities of OH groups of Zr 6 O 8 nodes in the MOFs UiO-66 and MOF-808, which have different densities of vacancy sites and different pore sizes. The results show that (1) terminal node OH groups are formed as formate and/or acetate ligands present initially on the nodes react with TBA to form esters, (2) these OH groups act as catalytic sites for TBA dehydration to isobutylene, and (3) TBA also reacts to break node–linker bonds to form esters and thereby unzip the MOFs. The small pores of UiO-66 limit the access of TBA and the reaction with the formate/acetate ligands bound within the pores, whereas the larger pores of MOF-808 facilitate transport and favor reaction in the MOF interior. However, after removal of the formate and acetate ligands by reaction with methanol to form esters, interior active sites in UiO-66 become accessible for the reaction of TBA, with the activity depending on the density of defect sites with terminal OH groups. The number of vacancies on the nodes is important in determining a tradeoff between the catalytic activity of a MOF and its resistance to unzipping. Computations at the level of density functional theory show how the terminal OH groups on node vacancies act as Brønsted bases, facilitating TBA dehydration via a carbocation intermediate in an E1 mechanism; the calculations further illuminate the comparable chemistry of the unzipping.
Synthesis and characterization of tetrairidium clusters in the metal organic framework UiO-67: Catalyst for ethylene hydrogenation
Not provided.