Search NASA⌕ Search

Engineering topics

Baer, Marcel D.

Publications and source records attributed to Baer, Marcel D..

12 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Noncanonical folding of peptoid oligomers: Formation of a closed conformation in nonpolar solvent

Peptoids provide a versatile platform for foldamer design, yet their conformational behavior in low-dielectric media remains poorly understood. The structural characteristics of N-1-phenylethylglycine (Nspe) homo-oligomers were inves-tigated in chloroform, a solvent that mimics the interior of lipid bilayers, using nuclear magnetic resonance (NMR) spec-troscopy and molecular dynamics (MD) simulations. Nspe7 populated two distinct compact conformations, while Nspe10 adopted a single homogeneous conformation related to the previously reported Nspe9 threaded-loop structure. Integrated experimental and computational analysis reveals that these structures are stabilized by cooperative end-to-end intramo-lecular hydrogen bonding, cis-trans backbone isomerism, and hydrophobic side-chain shielding. The resulting structures minimize exposed polar surface area, demonstrating a closed conformation in the low-dielectric environment. These find-ings establish specific chain-length requirements for achieving well-defined closed conformations. This work provides insights into peptoid folding in nonpolar media, enabling rational design strategies for solvent-directed conformational switching systems.

Oh, Jinyoung↗
DOE OSTI2024

Formation, chemical evolution and solidification of the dense liquid phase of calcium (bi)carbonate

Metal carbonates, which are ubiquitous in the near-surface mineral record, are a major product of biomineralizing organisms and serve as important targets for capturing anthropogenic CO 2 emissions. However, pathways of carbonate mineralization typically diverge from classical predictions due to the involvement of disordered precursors, such as the dense liquid phase (DLP), yet little is known about DLP formation or solidification processes. Using in situ methods we report that a highly hydrated bicarbonate DLP forms via liquid–liquid phase separation and transforms into hollow hydrated amorphous CaCO 3 particles. Acidic proteins and polymers extend DLP lifetimes while leaving the pathway and chemistry unchanged. Molecular simulations suggest that the DLP forms via direct condensation of solvated Ca 2+ •(HCO 3 – ) 2 complexes that react due to proximity effects in the confined DLP droplets. Furthermore, our findings provide insight into CaCO 3 nucleation that is mediated by liquid–liquid phase separation, advancing the ability to direct carbonate mineralization and elucidating an often-proposed complex pathway of biomineralization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Self-Assembling and Pore-Forming Peptoids as Antimicrobial Biomaterials

Bacterial infections have been a serious threat to mankind throughout history. Natural antimicrobial peptides (AMPs) and their membrane-disruption mechanism have generated an immense interest in the design and development of synthetic mimetics that could overcome the intrinsic drawbacks of AMPs, such as their susceptibility to proteolytic degradation. Herein, by exploiting the self-assembly and pore-forming capabilities of sequence-defined peptoids, we discovered a new family of low molecular weight peptoid antibiotics that exhibit excellent broad-spectrum activity and high selectivity toward a panel of clinically significant Gram-positive and Gram-negative bacterial strains, including vancomycin-resistant E. faecalis (VREF), methicillin-resistant S. aureus (MRSA), methicillin-resistant S. epidermidis (MRSE), E. coli, P. aeruginosa, and K. pneumoniae. Tuning peptoid sidechain chemistry and structure enabled us to tune the efficacy of antimicrobial activity. Mechanistic studies using Transmission Electron Microscopy (TEM), bacterial membrane depolarization and lysis, and time-kill kinetics assays along with molecular dynamics simulations reveal that these peptoids kill both Gram-positive and Gram-negative bacteria through a membrane-disruption mechanism. In conclusion, these robust and biocompatible peptoid-based antibiotics can provide a valuable tool for combating the emerging drug resistance.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Molecular mechanism of trehalose 6-phosphate inhibition of the plant metabolic sensor kinase SnRK1

SUCROSE-NON-FERMENTING1-RELATED PROTEIN KINASE1 (SnRK1), a central plant metabolic sensor kinase, phosphorylates its target proteins, triggering a global shift from anabolism to catabolism. Molecular modeling revealed that upon binding of KIN10 to GEMINIVIRUS REP-INTERACTING KINASE1 (GRIK1), KIN10’s activation T-loop reorients into GRIK1’s active site, enabling its phosphorylation and activation. Trehalose 6-phosphate (T6P) is a proxy for cellular sugar status and a potent inhibitor of SnRK1. T6P binds to KIN10, a SnRK1 catalytic subunit, weakening its affinity for GRIK1. Here, we investigate the molecular details of T6P inhibition of KIN10. Molecular dynamics simulations and in vitro phosphorylation assays identified and validated the T6P binding site on KIN10. Under high-sugar conditions, T6P binds to KIN10, blocking the reorientation of its activation loop and preventing its phosphorylation and activation by GRIK1. Under these conditions, SnRK1 maintains only basal activity levels, minimizing phosphorylation of its target proteins, thereby facilitating a general shift from catabolism to anabolism.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Development of a Systematic and Extensible Force Field for Peptoids (STEPs)

Peptoids (N-substituted glycines) are a class of biomimetic polymers that have attracted significant attention due to their accessible synthesis and enzymatic and thermal stability relative to their naturally occurring counterparts (polypeptides). While these polymers provide the promise of more robust functional materials via hierarchical approaches, they present a new challenge for computational structure prediction for material design. The reliability of calculations hinges on the accuracy of interactions represented in the force field used to model peptoids. For proteins, structure prediction based on sequence and de novo design has made dramatic progress in recent years; however, these models are not readily transferable for peptoids. Current efforts to develop and implement peptoid-specific force fields are spread out, leading to replicated efforts and a fragmented collection of parameterized sidechains. Here, we developed a peptoid-specific force field containing 70 different side chains, using GAFF2 as starting point. The new model is validated based on the generation of Ramachandran-like plots from DFT optimization compared against force field reproduced potential energy and free energy surfaces as well as the reproduction of equilibrium cis/trans values for some residues experimentally known to form helical structures. In conclusion, equilibrium cis/trans distributions (Kct) are estimated for all parameterized residues to identify which residues have an intrinsic propensity for cis or trans states in the monomeric state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mixed Molecular and Dissociative Water Adsorption on Hydroxylated TiO 2 (110): An Infrared Spectroscopy and Ab Initio Molecular Dynamics Study

For this work, we have investigated the structure and dynamics of water (D 2 O) adsorbed on TiO 2 (110) for coverages between 0 and 1 monolayer with infrared reflection absorption spectroscopy (IRAS) and ab initio molecular dynamics (AIMD) simulations. For D 2 O coverages as low as 0.4 monolayers (ML) on a hydroxylated surface, IR spectra typical of hydrogen-bonded chains of water molecules are observed. However, for D 2 O coverages ≥ 0.3 ML, a sharp, high frequency peak is also observed in the p-polarized spectra that is red-shifted relative to the bridging hydroxyl peak. This new peak is not observed for water adsorbed on an oxidized surface. Based on the AIMD simulations and comparisons with previous IR spectra for TiO 2 nanoparticles, the new peak is assigned to terminal hydroxyl groups produced by dissociative adsorption of some of the water on TiO 2 (110). The simulations indicate that water dissociation is related to the presence of defect electrons in the system, but not due to direct interactions between adsorbed water and bridging hydroxyls.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Regioselectivity mechanism of the Thunbergia alata Δ 6 -16:0-acyl carrier protein desaturase

Plant plastidial acyl–acyl carrier protein (ACP) desaturases are a soluble class of diiron-containing enzymes that are distinct from the diiron-containing integral membrane desaturases found in plants and other organisms. The archetype of this class is the stearoyl-ACP desaturase which converts stearoyl-ACP into oleoyl (18:1Δ 9 cis )-ACP. Several variants expressing distinct regioselectivity have been described including a Δ 6 -16:0-ACP desaturase from black-eyed Susan vine ( Thunbergia alata ). We solved a crystal structure of the T. alata desaturase at 2.05 Å resolution. Using molecular dynamics (MD) simulations, we identified a low-energy complex between 16:0-ACP and the desaturase that would position C6 and C7 of the acyl chain adjacent to the diiron active site. The model complex was used to identify mutant variants that could convert the T. alata Δ 6 desaturase to Δ 9 regioselectivity. Additional modeling between ACP and the mutant variants confirmed the predicted regioselectivity. Furthermore, to validate the in-silico predictions, we synthesized two variants of the T. alata desaturase and analyzed their reaction products using gas chromatography-coupled mass spectrometry. Assay results confirmed that mutants designed to convert T. alata Δ 6 to Δ 9 selectivity exhibited the predicted changes. In complementary experiments, variants of the castor desaturase designed to convert Δ 9 to Δ 6 selectivity lost some of their Δ9 desaturation ability and gained the ability to desaturate at the Δ 6 position. The computational workflow for revealing the mechanistic understanding of regioselectivity presented herein lays a foundation for designing acyl-ACP desaturases with novel selectivities to increase the diversity of monoenes available for bioproduct applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Structural and Dynamical Design Principles for Iron-Sulfur Clusters in Sequence Defined Polymers

This integrated synthetic and computational effort uses sequence defined polymers such as peptoids, and triazines, capable of mimicking a flexible protein environment to control the positioning of side chains around redox cofactors. This strategy will allow modulation of redox properties through both direct and indirect mechanisms. To this end the aim is defined to test the underlying hypothesis: that principles and critical functionalities governing the binding and tuning of naturally occurring electron carrier co-factors can be identified and used to predictably design and synthesize maquettes based on non-natural polymers resulting in new modular biomimetic scaffolds for Electron Transfer Materials. This will be achieved through design and synthesis of ligands that can stabilize iron-sulfur clusters and tune the redox potential based on sequence.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Early-Stage Aggregation and Crystalline Interactions of Peptoid Nanomembranes

Fully synthetic peptoid membranes are known to mimic important features of biological membranes, with several advantages over other biomimetic membranes. A fundamental understanding of how the individual peptoid amphiphiles assemble in solution to form the bilayer membrane is key to unlocking their versatility for application in a broad range of processes. Here, in this study, in situ X-ray scattering and molecular dynamics simulations are used to understand the early stages of assembly of three different peptoids that exhibit distinctly different crystallization kinetics. The in situ measurements reveal that the peptoids aggregate first into a nascent phase that is less crystalline than the assembled peptoid membrane. Anisotropic aromatic interactions are determined to be the dominant driving force in the early stages of membrane formation. These results provide key insights into how the peptoid assembly may be manipulated during the early stages of assembly and nucleation and growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

De Novo Design of Molecular Recognition for Sequence Defined Polymers

The proposed research aims at developing a computational framework that allows the de novo design of sequence defined polymers for molecular recognition. This framework will include the prediction of the 1) accessible backbone conformational space in solution environments for small to medium polymer length and 2) how side chains of different size and functionality can be used to design convergent or divergent receptor configurations. A structural database inspired by the protein database will be build that can be used to construct larger scaffolds based on smaller sequences

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗