Search NASA⌕ Search

Engineering topics

Bai, Mei

Publications and source records attributed to Bai, Mei.

High-temperature 205 Tl decay clarifies 205 Pb dating in early Solar System

Radioactive nuclei with lifetimes on the order of millions of years can reveal the formation history of the Sun and active nucleosynthesis occurring at the time and place of its birth. Among such nuclei whose decay signatures are found in the oldest meteorites, 205 Pb is a powerful example, as it is produced exclusively by slow neutron captures (the s process), with most being synthesized in asymptotic giant branch (AGB) stars. However, making accurate abundance predictions for 205 Pb has so far been impossible because the weak decay rates of 205 Pb and 205 Tl are very uncertain at stellar temperatures. To constrain these decay rates, we measured for the first time the bound-state β - decay of fully ionized 205 Tl 81+ , an exotic decay mode that only occurs in highly charged ions. The measured half-life is 4.7 times longer than the previous theoretical estimate and our 10% experimental uncertainty has eliminated the main nuclear-physics limitation. With new, experimentally backed decay rates, we used AGB stellar models to calculate 205 Pb yields. Propagating those yields with basic galactic chemical evolution (GCE) and comparing with the 205 Pb/ 204 Pb ratio from meteorites, we determined the isolation time of solar material inside its parent molecular cloud. We find positive isolation times that are consistent with the other s-process short-lived radioactive nuclei found in the early Solar System. Our results reaffirm the site of the Sun’s birth as a long-lived, giant molecular cloud and support the use of the 205 Pb– 205 Tl decay system as a chronometer in the early Solar System.

79 ASTRONOMY AND ASTROPHYSICS↗

The Path to Global Discovery: U.S. Leadership and Partnership in Particle Physics

In February 2022, HEPAP, the High Energy Physics Advisory Panel to DOE (Department of Energy) and NSF (National Science Foundation), was charged with forming a subpanel to conduct an international benchmarking study to evaluate U.S. leadership in particle physics in a global context (Appendix D). HEPAP formed an International Benchmarking Subpanel and gathered qualitative and quantitative data from the international particle physics community to 1) determine how the U.S. particle physics program can maintain critical international cooperation in an increasingly competitive environment for both talent and resources, 2) identify key areas where the U.S. has or could aspire to leadership roles, and 3) determine how programs and facilities can be structured to attract and retain talented people. This report also serves as input to P5 (Particle Physics Project Prioritization Panel), a subpanel of HEPAP that defines the strategic scientific direction for the U.S. particle physics program.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

HEPAP Facilities Subpanel Report

On December 1, 2023, the Director of the of the Office of Science (SC) charged all the Department of Energy Office of Science Federal Advisory Committees to respond to look toward the scientific horizon and identify what new or upgraded facilities will best serve the SC community needs in the next ten years (2024-2034). This report by the High Energy Physics Advisory Panel (HEPAP) assess facilities for the High Energy Physics (HEP) program.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Status and future plans for C 3 R&D

C 3 is an opportunity to realize an e + e - collider for the study of the Higgs boson at √s = 250 GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C 3 is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C 3 is the main linac. This paper presents the staged approach towards a facility to demonstrate C 3 technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The primary goal of the C 3 Demonstration R&D Plan is to reduce technical and cost risk by building and operating the key components of C 3 at an adequate scale. This R&D plan starts with the engineering design, and demonstration of one cryomodule and will culminate in the construction of a 3 cryomodule linac with pre-production prototypes. This R&D program would also demonstrate the linac rf fundamentals including achievable gradient and gradient stability over a full electron bunch train and breakdown rates. It will also investigate beam dynamics including energy spread, wakefields, and emittance growth. This work will be critical to confirm the suitability of the C 3 beam parameters for the physics reach and detector performance in preparation for a Conceptual Design Report (CDR), as well as for follow-on technology development and industrialization. The C 3 Demonstration R&D Plan will open up significant new scientific and technical opportunities based on development of high-gradient and high-efficiency accelerator technology. It will push this technology to operate both at the GeV scale and mature the technology to be reliable and provide high-brightness electron beams. The timeline for progressing with C 3 technology development will be governed by practical limitations on both the technical progress and resource availability. It consists of four stages: Stage 0) Ongoing fundamental R&D on structure prototypes, damping and vibrations. Stage 1) Advancing the engineering maturity of the design and developing start-to-end simulations including space-charge and wakefield effects. This stage will include testing of strucutres operating at cryogenic temperatures. Beam tests would be performed with high beam current to test full beam loading. Stage 2) Production and testing of the first cryomodule at cryogenic temperatures. This would provide sufficient experimental data to compile a CDR and it is anticipated for Stage 2 to last 3 years and to culminate with the transport of photo-electrons through the first cryomodule. Stage 3) Updates to the engineering design of the cryomodules, production of the second and third cryomodule and their installation. Lower charge and lower emittance beams will be used to investigate emittance growth. The successful full demonstration of the 3 cryomodules to deliver up to a 3 GeV beam and achieve the C 3 five gradient will allow a comprehensive and robust evaluation of the technical design of C 3 as well as mitigate technical, schedule, and cost risks required to proceed with a Technical Design Report (TDR).

radiation hardened magnets↗

Inverse modeling of circular lattices via orbit response measurements in the presence of degeneracy

The number and location of beam position monitors (BPMs) and steerers with respect to the quadrupoles in a circular lattice can lead to degeneracy in the context of fitting linear optics and extracting lattice information from measured closed orbits. Furthermore, the measurement uncertainties due to the imperfection of BPMs and steerers can be propagated by the fitting process in ways that prohibit the successful extraction of discrepancies between lattice elements in the real machine and their description in the corresponding model. We systematically studied the influence of the placement of BPMs and steerers on the reconstruction of linear optics and corresponding lattice information. The derivative of orbit response coefficients with respect to the quadrupole strengths, the Jacobian, is derived as an analytical formula. This analytical version of the Jacobian is used to further derive the theoretical limitations of fitting linear optics from closed orbits in terms of the placement of BPMs and steerers. It is further demonstrated that when evaluating the Jacobian during the fitting procedure, the analytical version can be used in place of the conventional finite-difference computation. This allows for greatly improved efficiency when computing the Jacobian during each iteration of the fitting procedure. The approach is tested with large-scale simulations and the findings are verified by measurement data taken on SIS18 synchrotron at GSI Helmholtz Centre for Heavy Ion Research. The presented methods are of general nature and can be applied to other accelerator lattices as well. The fitting procedure by using the analytical Jacobian is tested in conjunction with various methods for mitigating quasidegeneracy and the results agree with those obtained by using the conventional Jacobian via finite-difference approximation.

47 OTHER INSTRUMENTATION↗

Ultimate Limits of Future Colliders

With seven operational colliders in the world and two under construction, the international particle physics community not only actively explores options for the next facilities for detailed studies of the Higgs/electroweak physics and beyond-the-LHC energy frontier, but seeks a clear picture of the limits of the colliding beams method. In this paper, we try to consolidate various recent efforts in identifying physics limits of colliders in conjunction with societal sustainability, and share our thoughts about the perspective of reaching the ultimate quantum limit.

43 PARTICLE ACCELERATORS↗

C$^3$: A "Cool" Route to the Higgs Boson and Beyond

We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this article, we describe our vision for this technology and the near-term R&D program needed to pursue it.

43 PARTICLE ACCELERATORS↗

Experimental demonstration of interaction region beam waist position knob for luminosity leveling

In this paper, we report the experimental implementation of the model-dependent control of the interaction region beam waist position (s * knob) at Relativistic Heavy Ion Collider (RHIC). The s * adjustment provides an alternative way of controlling the luminosity and is only known method to control the luminosity and reduce the pinch effect of the future eRHIC. In this paper, we will first demonstrate the effectiveness of the s * knob in luminosity controlling and its application in the future electron ion collider, eRHIC, followed by the detail experimental demonstration of such knob in RHIC.

43 PARTICLE ACCELERATORS↗

GPU Acceleration of Spin Tracking in Colliding Beam Accelerators

The RHIC polarized proton program is at the stage of reaching its design goal of polarization, i.e. 70%. A robust and powerful spin tracking program is very critical for the understanding of spin dynamics and helpful in achieving high polarization. Currently, the RHIC spin tracking code is limited by single particle tracking due to the very high computing power. The goal of this project is to greatly improve the spin tracking computing power to explore more beam/machine parameters.

99 GENERAL AND MISCELLANEOUS↗

Working Group Report: High Intensity Secondary Beams from Protons

As part of the Intensity Frontier effort within the 2013 Community Summer Study, a workshop on the proton machine capabilities was held (High Intensity Secondary Beams Driven by Proton Beams) April 17-20, 2013 at Brookhaven National Laboratory in Upton, NY. Primary aims of the workshop were to understand: 1) the beam requirements for proposed high intensity proton beam based measurements; 2) the capabilities of existing world-wide high power proton machines; 3) proton facility upgrade plans and proposals for new facilities; 4) and to document the R&D needs for proton accelerators and target systems needed to support proposed intensity frontier measurements. These questions are addressed in this summary.

43 PARTICLE ACCELERATORS↗