The Implementation of a Motor Simulator for the Development of the Europa Lander Motor Controller
No abstract provided
Engineering topics
Publications and source records attributed to Baker, Chris.
No abstract provided
This paper introduces simplified energy modeling (SEM) approaches using DOE2 and EnergyPlus and proposes a validation method for simplified energy modeling. Simplified energy modeling can allow more design teams and owners to leverage the power of energy modeling to inform their designs and lead to greater energy savings and a lower first cost because the technologies and design strategies can be thoroughly tested against models before the decisions are made. By starting a discussion on how to develop simplified energy modeling approaches and methods to validate results, we hope to increase innovation in energy modeling software while decreasing variation between modelers. Simplified modeling is not yet widely accepted because it is unclear if the simplifications reduce the accuracy of the results. By starting an industry dialogue on a testing method for these modeling approaches, we hope to aid adoption of more streamlined tools when they can be shown to provide similar accuracy to more detailed tools. This paper proposes a method to test simplified energy modeling programs against the DOE prototype buildings. It builds on the testing procedure established for simulation engines by ASHRAE Standard 140. By comparing whole building and end use results from the accepted prototype buildings to any simplified modeling approach across multiple building types and climate zones we can determine if the simplifications create unwarranted error. We will present the SEM approach and results for a case study validation for a sample building types in 16 US climate zones from two such simplified energy modeling tools.
Arizona Public Service (APS) has created a high-quality Home Performance with ENERGY STAR (ENERGY STAR) program. In addition to being based on the ENERGY STAR guidelines developed by the U.S. Department of Energy and U.S. Environmental Protection Agency, they have used two other national guideline/standards to improve quality and contractor satisfaction: DOE's Standard Work Specifications for Home Energy Upgrades (SWS) and the Home Performance Coalition's Home Performance Extensible Markup Language (HPXML). As the program found areas for improvement, they worked with their implementer FSL Home Energy Solutions (FSL) to develop a quality assurance (QA) program based on the SWS. They also worked with energy assessment and other software providers to implement HPXML in a program administration software platform. This gave contractors a choice in what energy assessment software they used - each tool allowed in the program exported HPXML seamlessly to the program administration platform. APS worked closely with FSL and contractors to implement the QA program and roll out the software improvements. After implementing the QA program and software, the program saw approximately 15% improvement in measure and work scope quality.
MONK{sup R} is a Monte Carlo code for nuclear criticality and reactor physics analyses. It has a proven track record of application to the whole of the nuclear fuel cycle and is well established in the UK criticality community. Furthermore it is increasingly being used for reactor physics analysis (as described at ICNC 2011), which makes it an ideal tool for burn-up credit (BUC) calculations. Throughout the paper, example calculations based on a PWR are presented to illustrate the capabilities of the MONK10 code. In order to account for the spatial dependence of material burn-up it has in the past been necessary to design models with multiple regions and materials specifically to allow material burn-up to vary spatially. This is very labour intensive and difficult to change at a later stage. A new code version, MONK10, was released last year which includes the facility to allow a burn-up (BU) mesh to be superimposed on an existing model in order to account for the spatial dependence of the burn-up. This facility is used to consider the effect of radial position of a fuel element in a PWR core on BUC. Additionally, a thermal hydraulics (TH) mesh can be used to specify region dependent temperature. This, coupled with the fact that MONK10 also incorporates an on-the-fly Doppler broadening methodology facilitates the modelling of spatially dependent temperatures for the different components. A TH mesh is used to superimpose a temperature profile on a PWR based model and the effect of this on BUC is considered. The burn-up modelling in MONK has been benchmarked against the ANSWERS WIMS deterministic reactor physics code. Once the burn-up calculation has been completed and the depleted fuel compositions determined the spent fuel compositions can be transferred into a model of a storage facility or transport flask in order to perform burn-up credit analysis. The initial model is usually described as the donor model and the latter model as the receiver model. This transfer is carried out using the COWL option which allows the specification of a material in the receiver model based on the material's composition in a given BU mesh cell from the donor model. This allows compositions and densities to be transferred and also allows user specified adjustments to be made. For example, this could include omitting the fission products in order to estimate their contribution to burn-up credit and provide an actinide-only analysis. The effect of excluding appropriate nuclides is presented. An example of how the ANSWERS SPRUCE code can be used to quantify uncertainty in a BUC calculation is also presented. (authors)
This document presents a Domain Model (DM) that spans the entire VERA problem space. The objective of this domain model is to provide clearly defined domain definitions and create a ubiquitous language for VERA. The VERA domain model is comprised of a set of subdomains, the details of which will be described in separate documents (for example, see and).
Abstract not provided.
Abstract not provided.