Search NASA⌕ Search

Engineering topics

Balakrishnan, Ganesh

Publications and source records attributed to Balakrishnan, Ganesh.

At least 37 records · Page 2

High quality AlSb for radiation detection

Provided is a method of making a radiation detector, including: growing a thin film on a substrate. The substrate is a silicon substrate. The thin film includes aluminum antimony alloy (AlSb). The growing is epitaxial growth via ultra-high vacuum molecular beam epitaxy (UHV-MBE).

Balakrishnan, Ganesh↗

InAs FinFETs Performance Enhancement by Superacid Surface Treatment

Here, a post superacid (SA) treatment was proposed to enhance the performance of InAs FinFETs on SiO 2 /Si substrates. Typically, the subthreshold swing (SS) has reduced from 217 to 170 mV/decade and the transconductance (gm) has increased from 6.44 to 26.5 μS/μm after SA treatment. It was found that the interfacial In 2 O 3 at the InAs/ZrO 2 interface was effectively reduced after SA treatment due to the strong protonating nature of the SA solution. As a result, the interface trap density was reduced leading to a pronounced reduction of sheet resistance after SA treatment. The modeling of transfer characteristics indicates that the carrier mobility is enhanced by 5.87.1 folds after SA treatment due to interfacial traps reduction. The results suggest that SA treatment can be potentially extended to other III-V MOSFETs to enhance the device performances.

42 ENGINEERING↗

Light-Emitting Metasurfaces: Simultaneous Control of Spontaneous Emission and Far-Field Radiation

Light-emitting sources and devices permeate every aspect of our lives and are used in lighting, communications, transportation, computing, and medicine. Advances in multifunctional and “smart lighting” would require revolutionary concepts in the control of emission spectra and directionality. Such control might be possible with new schemes and regimes of light–matter interaction paired with developments in light-emitting materials. We show that all-dielectric metasurfaces made from III–V semiconductors with embedded emitters have the potential to provide revolutionary lighting concepts and devices, with new functionality that goes far beyond what is available in existing technologies. Specifically, we use Mie-resonant metasurfaces made from semiconductor heterostructures containing epitaxial quantum dots. By controlling the symmetry of the resonant modes, their overlap with the emission spectra, and other structural parameters, we can enhance the brightness by 2 orders of magnitude, as well as reduce its far-field divergence significantly.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quantum Nanofabrication: Mechanisms and Fundamental Limits

Quantum-size-controlled photoelectrochemical (QSC-PEC) etching, which uses quantum confinement effects to control size, can potentially enable the fabrication of epitaxial quantum nanostructures with unprecedented accuracy and precision across a wide range of materials systems. However, many open questions remain about this new technique, including its limitations and broader applicability. In this project, using an integrated experimental and theoretical modeling approach, we pursue a greater understanding of the time-dependent QSC-PEC etch process and to uncover the underlying mechanisms that determine its ultimate accuracy and precision. We also seek to broaden our understanding of the scope of its ultimate applicability in emerging nanostructures and nanodevices.

36 MATERIALS SCIENCE↗

Carrier concentration and transport in Be-doped InAsSb for infrared sensing applications

Accurate p-type doping of the active region in III-V infrared detectors is essential for optimizing the detector design and overall performance. While most III-V detector absorbers are n-type (e.g., nBn), the minority carrier devices with p-type absorbers would be expected to have relatively higher quantum efficiencies due to the higher mobility of their constituent minority carrier electrons. However, correctly determining the hole carrier concentration in narrow bandgap InAsSb may be challenging due to the potential for electron accumulation at the surface of the material and at its interface with the layer grown directly below it. Electron accumulation layers form high conductance electron channels that can dominate both resistivity and Hall-effect transport measurements. Therefore, to correctly determine the bulk hole concentration and mobility, temperature- and magnetic-field-dependent transport measurements in conjunction with Multi-Carrier Fit analysis were utilized on a series of p-doped InAs0.91Sb0.09 samples on GaSb substrates. Finally, the resulting hole concentrations and mobilities at 77 K (300 K) were 1.6 x 1018 cm -3 (2.3 x 1018 cm-3) and 125 cm2 V -1 s -1 (60 cm2 V-1 s-1), respectively, compared with the intended Be-doping of ~2 x 10 18 cm -3 .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Isolating GaSb membranes grown metamorphically on GaAs substrates using highly selective substrate removal etch processes

The etch rates of NH 4 OH:H 2 O 2 and C 6 H 8 O 7 :H 2 O 2 for GaAs and GaSb have been investigated to develop a selective etch for GaAs substrates and to isolate GaSb epilayers grown on GaAs. The NH 4 OH:H 2 O 2 solution has a greater etch rate differential for the GaSb/GaAs material system than C 6 H 8 O 7 :H 2 O 2 solution. The selectivity of NH 4 OH:H 2 O 2 for GaAs/GaSb under optimized etch conditions has been observed to be as high as 11471 ± 1691 whereas that of C 6 H 8 O 7 :H 2 O 2 has been measured up to 143 ± 2. The etch contrast has been verified by isolating 2 μm thick GaSb epi-layers that were grown on GaAs substrates. GaSb membranes were tested and characterized with high-resolution X-Ray diffraction (HR-XRD) and atomic force microscopy (AFM).

36 MATERIALS SCIENCE↗