Search NASA⌕ Search

Engineering topics

Baldin, Boris

Publications and source records attributed to Baldin, Boris.

Combination of D0 measurements of the top quark mass

We present a combination of measurements of the top quark mass by the D0 experiment in the lepton+jets and dilepton channels. We use all the data collected in Run I (1992–1996) at s=1.8 TeV and Run II (2001–2011) at s=1.96 TeV of the Tevatron pp¯ collider, corresponding to integrated luminosities of 0.1 fb-1 and 9.7 fb-1, respectively. The combined result is: mt=174.95±0.40(stat)±0.64(syst) GeV=174.95±0.75 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the direct CP violating charge asymmetry in $B^\pm \rightarrow \mu^\pm \nu_\mu D^{0}$ decays

We present the first measurement of the CP violating charge asymmetry in B±→μ±νμD0 decays using the full Run II integrated luminosity of 10.4 fb-1 in proton-antiproton collisions collected with the D0 detector at the Fermilab Tevatron Collider. We measure a difference in the yield of B- and B+ mesons in these decays by fitting the reconstructed invariant mass distributions. This results in an asymmetry of AμD0=[-0.14±0.20]%, which is consistent with standard model predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of top quark polarization in t t ¯ lepton + jets final states

We present a measurement of top quark polarization in t ¯ t pair production in p ¯ p collisions at √ s = 1.96 TeV using data corresponding to 9.7 fb -1 of integrated luminosity recorded with the D0 detector at the Fermilab Tevatron Collider. We consider final states containing a lepton and at least three jets. The polarization is measured through the distribution of lepton angles along three axes: the beam axis, the helicity axis, and the transverse axis normal to the t ¯ t production plane. This is the first measurement of top quark polarization at the Tevatron using lepton + jet final states and the first measurement of the transverse polarization in t ¯ t production. The observed distributions are consistent with standard model predictions of nearly no polarization.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the Inclusive $t\bar{t}$ Production Cross Section in $p\bar{p}$ Collisions at $\sqrt{s}=1.96$ TeV and Determination of the Top Quark Pole Mass

The inclusive cross section of top quark-antiquark pairs produced in pp¯ collisions at s=1.96 TeV is measured in the lepton+jets and dilepton decay channels. The data sample corresponds to 9.7 fb-1 of integrated luminosity recorded with the D0 detector during Run II of the Fermilab Tevatron Collider. Employing multivariate analysis techniques we measure the cross section in the two decay channels and we perform a combined cross section measurement. For a top quark mass of 172.5 GeV, we measure a combined inclusive top quark-antiquark pair production cross section of σtt¯=7.26±0.13(stat)-0.50+0.57(syst) pb which is consistent with standard model predictions. We also perform a likelihood fit to the measured and predicted top quark mass dependence of the inclusive cross section, which yields a measurement of the pole mass of the top quark. The extracted value is mt=172.8±1.1(theo)-3.1+3.3(exp) GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the Top Quark Mass Using the Matrix Element Technique in Dilepton Final States

We present a measurement of the top quark mass in pp¯ collisions at a center-of-mass energy of 1.96 TeV at the Fermilab Tevatron collider. The data were collected by the D0 experiment corresponding to an integrated luminosity of 9.7 fb-1. The matrix element technique is applied to tt¯ events in the final state containing leptons (electrons or muons) with high transverse momenta and at least two jets. The calibration of the jet energy scale determined in the lepton+jets final state of tt¯ decays is applied to jet energies. This correction provides a substantial reduction in systematic uncertainties. We obtain a top quark mass of mt=173.93±1.84 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

$B^{0}_{s}$ lifetime measurement in the CP-odd decay channel $B^{0}_{s} \to J/\psi f_{0}(980)$

The lifetime of the Bs0 meson is measured in the decay channel Bs0→J/ψπ+π- with 880≤Mπ+π-≤1080 MeV/c2, which is mainly a CP-odd state and dominated by the f0(980) resonance. In 10.4 fb-1 of data collected with the D0 detector in Run II of the Tevatron, the lifetime of the Bs0 meson is measured to be τ(Bs0)=1.70±0.14(stat)±0.05(syst) ps. Neglecting CP violation in Bs0/B¯s0 mixing, the measurement can be translated into the width of the heavy mass eigenstate of the Bs0, ΓH=0.59±0.05(stat)±0.02(syst) ps-1.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study of double parton interactions in diphoton + dijet events in $p\bar{p}$ collisions at $\sqrt{s} = 1.96$ TeV

We use a sample of diphoton+dijet events to measure the effective cross section of double parton interactions, which characterizes the area containing the interacting partons in proton-antiproton collisions, and find it to be σeff=19.3±1.4(stat)±7.8(syst) mb. The sample was collected by the D0 detector at the Fermilab Tevatron collider in pp¯ collisions at s=1.96 TeV and corresponds to an integrated luminosity of 8.7 fb-1.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the $B_s^0$ Lifetime in the Flavor-Specific Decay Channel $B_s^0 \to D_s^- \mu^+\nu X$

We present an updated measurement of the B s 0 lifetime using the semileptonic decays B s 0 → D s - μ + ν X , with D s - → ϕ π - and ϕ → K + K - (and the charge conjugate process). This measurement uses the full Tevatron Run II sample of proton-antiproton collisions at s = 1.96 TeV , comprising an integrated luminosity of 10.4 fb − 1 . We find a flavor-specific lifetime τ fs ( B s 0 ) = 1.479 ± 0.010 ( stat ) ± 0.021 ( syst ) ps . This technique is also used to determine the B 0 lifetime using the analogous B 0 → D - μ + ν X decay with D - → ϕ π - and ϕ → K + K - , yielding τ ( B 0 ) = 1.534 ± 0.019 ( stat ) ± 0.021 ( syst ) ps . Both measurements are consistent with the current world averages, and the B s 0 lifetime measurement is one of the most precise to date. Taking advantage of the cancellation of systematic uncertainties, we determine the lifetime ratio τ fs ( B s 0 ) / τ ( B 0 ) = 0.964 ± 0.013 ( stat ) ± 0.007 ( syst ) .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Scintillation counter and wire chamber front end modules for high energy physics experiments

This document describes two front-end modules developed for the proposed MIPP upgrade (P-960) experiment at Fermilab. The scintillation counter module was developed for the Plastic Ball detector time and charge measurements. The module has eight LEMO 00 input connectors terminated with 50 ohms and accepts negative photomultiplier signals in the range 0.25...1000 pC with the maximum input voltage of 4.0 V. Each input has a passive splitter with integration and differentiation times of {approx}20 ns. The integrated portion of the signal is digitized at 26.55 MHz by Analog Devices AD9229 12-bit pipelined 4-channel ADC. The differentiated signal is discriminated for time measurement and sent to one of the four TMC304 inputs. The 4-channel TMC304 chip allows high precision time measurement of rising and falling edges with {approx}100 ps resolution and has internal digital pipeline. The ADC data is also pipelined which allows deadtime-less operation with trigger decision times of {approx}4 {micro}s. The wire chamber module was developed for MIPP EMCal detector charge measurements. The 32-channel digitizer accepts differential analog signals from four 8-channel integrating wire amplifiers. The connection between wire amplifier and digitizer is provided via 26-wire twist-n-flat cable. The wire amplifier integrates input wire current and has sensitivity of 275 mV/pC and the noise level of {approx}0.013 pC. The digitizer uses the same 12-bit AD9229 ADC chip as the scintillator counter module. The wire amplifier has a built-in test pulser with a mask register to provide testing of the individual channels. Both modules are implemented as a 6Ux220 mm VME size board with 48-pin power connector. A custom europack (VME) 21-slot crate is developed for housing these front-end modules.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

MIPP Plastic Ball electronics upgrade

An upgrade electronics design for Plastic Ball detector is described. The Plastic Ball detector was a part of several experiments in the past and its back portion (proposed to be used in MIPP) consists of 340 photomultipliers equipped with a sandwich scintillator. The scintillator sandwich has fast and slow signal component with decay times 10 ns and 1 {micro}s respectively. The upgraded MIPP experiment will collect up to 12,000 events during each 4 second spill and read them out in {approx}50 seconds between spills. The MIPP data acquisition system will employ deadtime-less concept successfully implemented in Muon Electronics of Dzero experiment at Fermilab. An 8-channel prototype design of the Plastic Ball Front End (PBFE) implementing these requirements is discussed. Details of the schematic design, simulation and prototype test results are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗