Search NASA⌕ Search

Engineering topics

Banerjee, S.

Publications and source records attributed to Banerjee, S..

232 records · Page 13

Validation and tuning of the CMS full simulation

The CMS simulation, based on the Geant4 toolkit, has been operational within the new CMS software framework for more than four years. The description of the detector, including the forward regions, has been completed. A detailed investigation of detector positioning and material budget is underway using collision data. Detailed modelling of detector noise has been performed and validated with the collision data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Validation of Geant4 hadronic generators versus thin target data

The GEANT4 toolkit is widely used for simulation of high energy physics (HEP) experiments, in particular, those at the Large Hadron Collider (LHC). The requirements of robustness, stability and quality of simulation for the LHC are demanding. This requires an accurate description of hadronic interactions for a wide range of targets over a large energy range, from stopped particle reactions to low energy nuclear interactions to interactions at the TeV energy scale. This is achieved within the Geant4 toolkit by combining a number of models, each of which are valid within a certain energy domain. Comparison of these models to thin target data over a large energy range indicates the strengths and weaknesses of the model descriptions and the energy range over which each model is valid. Software has been developed to handle the large number of validation tests required to provide the feedback needed to improve the models. An automated process for carrying out the validation and storing/displaying the results is being developed and will be discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Search for the rare decay B s 0 → μ + μ -

We present the results of a search for the flavor changing neutral current decay B 0 s using 6.1 fb -1 of pp⁻ collisions at collected by the D0 experiment at the Fermilab Tevatron Collider. The observed number of B 0 s candidates is consistent with background expectations. The resulting upper limit on the branching fraction is B (B 0 s → μ⁺μ⁻) < 5.1 x 10 -8 at the 95% C.L. This limit is a factor of 2.4 better than that of the previous D0 analysis and the best limit to date.

Abazov, V.M.↗

NaAlSi: Self-doped semimetallic superconductor with free electrons and covalent holes

In a layered ternary sp conductor NaAlSi, possessing the iron-pnictide “111” crystal structure, it superconducts at 7 K. Using density-functional methods, we show that this compound is an intrinsic (self-doped) low-carrier-density semimetal with a number of unusual features. Covalent Al-Si valence bands provide the holes, and free-electronlike Al 3s bands, which propagate in the channel between the neighboring Si layers, dip just below the Fermi level to create the electron carriers. The Fermi level (and therefore the superconducting carriers) lies in a narrow and sharp peak within a pseudogap in the density of states. The small peak arises from valence bands which are nearly of pure Si, quasi-two-dimensional, flat, and coupled to Al conduction bands. Isostructural NaAlGe, which is not superconducting above 1.6 K, has almost exactly the same band structure except for one missing piece of small Fermi surface. At certain deformation potentials induced by Si and Na displacements along the c axis are calculated and discussed. Finally, it seems likely that the mechanism of pairing is related to that of several other lightly doped two-dimensional nonmagnetic semiconductors (TiNCl, ZrNCl, HfNCl), which is not well understood but apparently not of phonon origin.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Search for the Associated Production of a b Quark and a Neutral Supersymmetric Higgs Boson that Decays into {tau} Pairs

We report results from a search for production of a neutral Higgs boson in association with a b quark. We search for Higgs decays to {tau} pairs with one {tau} subsequently decaying to a muon and the other to hadrons. The data correspond to 2.7 fb{sup -1} of pp collisions recorded by the D0 detector at {radical}(s)=1.96 TeV. The data are found to be consistent with background predictions. The result allows us to exclude a significant region of parameter space of the minimal supersymmetric model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Combined measurements of anomalous charged trilinear gauge-boson couplings from diboson production in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

We present measurements of the anomalous WWgamma and WWZ trilinear gauge couplings from a combination of four diboson production and decay channels using data collected by the D0 detector at the Fermilab Tevatron Collider. These results represent the first high statistics combination of limits across different diboson production processes at the Tevatron and use data corresponding to an integrated luminosity of approximately 1 fb^-1. When respecting SU(2)_L x U(1)_Y symmetry, we measure central values and 68% C.L. allowed intervals of kappa_gamma=1.07^+0.16_-0.20, lambda =0.00^+0.05_-0.04 and g_1^Z=1.05 +/- 0.06. We present the most stringent measurements to date for the W boson magnetic dipole and electromagnetic quadrupole moments of mu_W=2.02^+0.08_-0.09 (e/2M_W) and q_W=-1.00 +/- 0.09 (e/M^2_W), respectively.

Abazov, V. M.↗

Search for the Standard Model Higgs Boson in Tau Final States

We present a search for the standard model Higgs boson using hadronically decaying tau leptons, in 1 fb{sup -1} of data collected with the D0 detector at the Fermilab Tevatron pp collider. We select two final states: tau{sup +}- plus missing transverse energy and b jets, and tau{sup +}tau{sup -} plus jets. These final states are sensitive to a combination of associated W/Z boson plus Higgs boson, vector boson fusion, and gluon-gluon fusion production processes. The observed ratio of the combined limit on the Higgs production cross section at the 95% C.L. to the standard model expectation is 29 for a Higgs boson mass of 115 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of {gamma}+b+X and {gamma}+c+X Production Cross Sections in pp Collisions at {radical}(s)=1.96 TeV

First measurements of the differential cross sections d{sup 3}{sigma}/(dp{sub T}{sup {gamma}}dy{sup {gamma}}dy{sup jet}) for the inclusive production of a photon in association with a heavy quark (b, c) jet are presented, covering photon transverse momenta 30<p{sub T}{sup {gamma}}<150 GeV, photon rapidities |y{sup {gamma}}|<1.0, jet rapidities |y{sup jet}|<0.8, and jet transverse momenta p{sub T}{sup jet}>15 GeV. The results are based on an integrated luminosity of 1 fb{sup -1} in pp collisions at {radical}(s)=1.96 TeV recorded with the D0 detector at the Fermilab Tevatron Collider. The results are compared with next-to-leading order perturbative QCD predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Formulation of design guidelines for automated robotic assembly in outerspace

The approach for arriving at design guidelines for assembly by robots in outerspace is illustrated. The use of robots in a zero gravity environment necessitates that extra factors over and above normal design guidelines be taken into account. Besides, many of the guidelines for assembly by robots on earth do not apply in space. However, considering the axioms for normal design and assembly as one set, guidelines for design and robotic assembly as another, and guidelines for design and assembly in space as the third set, unions and intersections of these sets can generate guidelines for two or more of these conditions taken together - say design and manual assembly in space. Therein lies the potential to develop expert systems in the future, which would use an exhaustive database and similar guidelines to arrive at those required by a superposition of these conditions.

Dwivedi, Suren N.↗

I-V-T analysis of radiation damage in high efficiency Si solar cells

A detailed analysis of current-voltage characteristics of N(+)-P/P solar cells indicate that there is a combination of different mechanisms which results in an enhancement in the dark current and in turn deteriorates the photovoltaic performance of the solar cells after 1 MeV e(-) irradiation. The increase in the dark current is due to three effects, i.e., bulk recombination, space charge recombination by deep traps and space charge recombination through shallow traps. It is shown that the increase in bulk recombination current is about 2 to 3 orders of magnitude whereas space charge recombination current due to shallow traps increases only by an order or so and no space charge recombination through deep traps was observed after irradiation. Thus, in order to improve the radiation hardness of these devices, bulk properties should be preserved.

Banerjee, S.↗

Influence of design variables on radiation hardness of silicon MINP solar cells

Metal-insulator-N/P silicon (MINP) solar cells were fabricated using different substrate resistivity values, different N-layer designs, and different I-layer designs. A shallow junction into an 0.3 ohm-cm substrate gave best efficiency whereas a deeper junction into a 1 to 4 ohm-cm substrate gave improved radiation hardness. I-layer design variation did little to influence radiation hardness.

Anderson, W. A.↗

A new basis for the determination of fracture toughness

A study is presented which shows that the growth of the plastic zone and the constraint in a compact tension specimen depends significantly on specimen width. The analysis permits the estimation of the contribution of the growth of plastic zone to the deviation from linearity. The contribution of the crack growth to the deviation from linearity is evaluated from the analysis of a typical R-curve data. A combination of these two analyses enables one to define a very simple procedure for the determination of fracture toughness. The fracture toughness is defined as the stress intensity value at which the crack extension starts. The good agreement between analytical results and experimental KQ and KIC values determined over a wide range of thicknesses, widths, and materials justifies the proposed procedures. The KIC determined according to this procedure is independent of specimen width and such a procedure enhances the range of applicability of the K concept to a wider combination of configurations and materials.

Banerjee, S.↗