Search NASASearch

Engineering topics

Barnes, J. C.

Publications and source records attributed to Barnes, J. C..

At least 19 records

A Novel High Efficient Laser Transmitter Design for a Space-borne Ozone Differential Lidar (DIAL)

Development of a UV laser transmitter capable of operating from a space platform is a critical step in enabling global earth observations of aerosols and ozone at resolutions greater than current passive instrument capabilities. Tropospheric chemistry is well recognized as the next frontier for global atmospheric measurement. NASA Langley Research Center (LaRC) and the Canadian Space Agency (CSA) have jointly studied the requirements for a satellite based, global ozone monitoring instrument. The study, called Ozone Research using Advanced Cooperative Lidar Experiment (ORACLE) has defined the Differential Absorption Lidar (DIAL) instrument performance, weight and power, and configuration requirements for a space based measurement. In order to achieve the measurement resolution and acceptable signal-to-noise from lidar returns, 500mJ/pulse (5 Watts average power) is required at both 305-308nm and 315-320nm wavelengths. These are consecutive pulses, in a 10 Hz, double-pulsed format. The two wavelengths are used as the on- and off-lines for the ozone DIAL measurement. NASA Langley is currently developing technology for a UV laser transmitter capable of meeting the ORACLE requirements. Experimental efforts to date have shown that the UV generation scheme is viable, and that energies greater than l00mJ/pulse are possible. In this paper, we will briefly discuss the down select process for the proposed laser design, the study effort to date and the laser system design, including both primary and alternate approaches. We will describe UV laser technology that minimizes the total number of optical components (for enhanced reliability) as well as the number of UV coated optics required to transmit the light from the laser (for enhanced optical damage resistance). While the goal is to develop a laser that will produce 500 mJ of energy, we will describe an optional design that will produce output energies between 100 - 200 mJ/unit and techniques for combining multiple laser modules in order to transmit a minimum of 500mJ of UV energy in each pulse of the on- and off-line pulse pairs. This modular laser approach provides redundancy and significantly reduces development time, risk and cost when compared to the development of a single, 500mJ double-pulsed laser subsystem. Finally, we will summarize the laser development effort to date, including results that include the highest known UV energy ( 130 mJ at 320nm) ever produced by a solid-state laser operating in this wavelength region.

Edwards, W. C.

Injection Seeding of Ti:Al2O3 in an unstable resonator theory and experiment

Injection Seeding of a Ti:Al2O3 unstable resonator using both a pulsed single-mode Ti:Al2O3 laser and a continuous wave laser diode has been characterized. Results are compared with a theory which calculates injection seeding as function of seed and resonator alignment, beam profiles, and power.

Barnes, J. C.

Development in tunable solid state lasers with high spectral purity, high efficiency and long lifetime for differential absorption lidar

The paper presents a review of tunable vibronic solid state lasers for DIAL measurements and provides new experimental results for tunable Ti:sapphire lasers, materials development, and spectral bandwidth narrowing through injection control. Pulsed injection control of a Ti:sapphire laser with a 2.5-pm narrow band pulsed dye laser and with another Ti:sapphire laser is demonstrated with nearly complete energy extraction, indicating homogeneous line broadening. The status of tunable solid state lasers in the 1.6-2.3 micron range for DIAL measurements of trace gases, and development trends for lasers with reduced cryogenic cooling needs, are included. The effects of laser gain on optical damage, energy extraction, and amplified spontaneous emission are indicated for several tunable lasers.

Hess, R. V.

Applications systems verification and transfer project. Volume 8: Satellite snow mapping and runoff prediction handbook

The purpose of the handbook is to update the various snowcover interpretation techniques, document the snow mapping techniques used in the various ASVT study areas, and describe the ways snowcover data have been applied to runoff prediction. Through documentation in handbook form, the methodology developed in the Snow Mapping ASVT can be applied to other areas.

Bowley, C. J.

The application of Heat Capacity Mapping Mission (HCMM) thermal data to snow hydrology

The application of HCMM thermal infrared data to snow hydrology and the prediction of snowmelt runoff was evaluated. Data for the Salt Verde watershed in central Arizona and the southern Sierra Nevada in California were analyzed and compared to LANDSAT and NOAA satellite data, U-2 thermal data, and other correlative data. It was determined that HCMM thermal imagery provides data as accurate for snow mapping as does visible imagery, and that in comparison with the reslution of other satellite imagery, it may be the most useful. Data from the HCMM thermal channel, with careful calibration, provides useful snow surface temperature data for hydrological purposes. An approach to an automated method of analysis is presented.

Barnes, J. C.

Analysis of GOES imagery and digitized data for the SEV-UPS period, August 1979

In support of the Southeastern Virginia Urban Plume Study (SEV-UPS), GOES satellite imagery was analyzed for the month of August 1979. The analyzed GOES images provide an additional source of meteorological input useful in the evaluation of air quality data collected during the month long period of the SEV-UPS experiment. In addition to the imagery analysis, GOES digitized data were analyzed for the period of August 6 to 11, during which a regional haze pattern was detectable in the imagery. The results of the study indicate that the observed haze patterns correspond closely with areas shown in surface based measurements to have reduced visibilities and elevated pollution levels. Moreover, the results of the analysis of digitized data indicate that digital reflectance counts can be directly related to haze intensity both over land and ocean. The model results agree closely with the observed GOES digital reflectance counts, providing further indication that satellite remote sensing can be a useful tool for monitoring regional elevated pollution episodes.

Bowley, C. J.

Detection of regional air pollution episodes utilizing satellite data in the visual range

A comparative analysis of satellite-observed haze patterns and ground-based aerosol measurements is carried out for July 20-23, 1978. During this period, a significant regional air pollution episode existed across the northeastern United States, accompanied by widespread haze, reduced surface visibility, and elevated sulfate levels measured by the Sulfate Regional Experiment (SURE) network. The results show that the satellite-observed haze patterns correlate closely with the area of reported low surface visibility (less than 4 mi) and high sulfate levels. Quantitative information on total aerosol loading derived from the satellite-digitized data, using an atmospheric radiative transfer model, agrees well with the results obtained from the ground-based measurements.

Bowley, C. J.

Snow hydrology studies using data from the Heat Capacity Mapping Mission

This paper describes a study of the snow hydrology application of thermal infrared (IR) data from the Heat Capacity Mapping Mission (HCMM) satellite. The HCMM data in both imagery and digital tape formats are analyzed for two study areas: the Salt-Verde Watershed in central Arizona and the southern Sierra Nevada in California. The analysis procedures are described, including the development of a unique contour plotting program that makes it possible to overlay HCMM thermal contours directly onto the visible channel imagery. The results indicate that satellite thermal-IR data can provide the hydrologist with additional useful information on snow cover.

Barnes, J. C.

Investigation of the application of HCMM thermal data to snow hydrology

All heat capacity mapping mission (HCMM) data needed for the investigation were received, including the imagery and CCT's for the April 1979 day/night registered data set for the Sierras study area. Three sets of excellent data for the Sierras study were received. Analysis of the earlier two sets (late May and mid July 1978) was completed. Initial examination of the latest imagery received indicates that the April 1979 data are the best quality HCMM day/night registered data of the three data sets. The thermal inertia imagery is particularly outstanding, appearing to contain much more detail and information than the earlier thermal inertia images.

Barnes, J. C.

Investigation of the application of HCMM thermal data to snow hydrology

The author has identified the following significant results. Comparison of the thermal IR band temperatures over the rapidly melting snowcover in a number of locations in the Salt-Verde Arizona watershed by the U-2 high altitude multispectral scanner, with temperatures for these same locations measured by the corresponding HCMM pass, indicate that the U-2 temperatures are typically 5 C higher than the values analyzed from the HCMM infrared digital printout. Results tend to substantiate findings of other investigators that with the offset that has been applied to all HCMM data, the HCMM temperature values may, in fact, actually be 5 C too low. Analysis of differences between the HCMM day and night temperatures for selected snowcovered areas in the Sierra Nevada Mountains, derived from the daytime and nighttime printouts, show greater delta tau values for the sparsely vegetated higher elevations than for the lower elevation, more densely forested terrain. The differences for the 12 hour sequence are also greater in most instances than the 36 hour difference.

Barnes, J. C.

Investigation of the application of HCMM thermal data to snow hydrology

The author has identified the following significant results. Analysis of HCMM digital thermal data for daytime passes over the Salt-Verde Watershed area on five dates show a gradual depletion of snow cover in the watershed (and in the Little Colorado Watershed to the north) from a maximum on February 9th to a nearly complete disappearance of the snow pack by April 15th. Temperature contours correspond closely with the snowline observed in the visible image.

Barnes, J. C.

Evaluation of the capabilities of satellite imagery for monitoring regional air pollution episodes

A comparative analysis of satellite visible channel imagery and ground based aerosol measurements is carried out for three cases representing a significant pollution episodes based on low surface visibility and high sulfate levels. The feasibility of detecting pollution episodes from space is also investigated using a simulation model. The model results are compared to quantitative information derived from digitized satellite data. The results show that when levels are or = 30 micrograms/cu, a haze pattern that correlates closely with the area of reported low surface visibilities and high micrograms sulfate levels can be detected in satellite visible channel imagery. The model simulation demonstrates the potential of the satellite to monitor the magnitude and areal extent of pollution episodes. Quantitative information on total aerosol amount derived from the satellite digitized data using the atmospheric radiative transfer model agrees well with the results obtained from the ground based measurements.

Barnes, J. C.

Evaluation of the spatial and temporal measurement requirements of remote sensors for monitoring regional air pollution episodes

The spatial and temporal measurement requirements of satellite sensors for monitoring regional air pollution episodes were evaluated. Use was made of two sets of data from the Sulfate Regional Experiment (SURE), which provided the first ground-based aerosol measurements from a regional-scale station network. The sulfate data were analyzed for two air pollution episode cases. The results of the analysis indicate that the key considerations required for episode mapping from satellite sensors are the following: (1) detection of sulfate levels exceeding 20 micron-g/cu m; (2) capability to view a broad area (of the order of 1500 km swath) because of regional extent of pollution episodes; (3) spatial resolution sufficient to detect variations in sulfate levels of greater than 10 micron-g/cu m over distances of the order of 50 to 75 km; (4) repeat coverage at least on a daily basis; and (5) satellite observations during the mid to late morning local time, when the sulfate levels have begun to increase after the early morning minimum levels, and convective-type cloud cover has not yet increased to the amount reached later in the afternoon. Analysis of the satellite imagery shows that convective clouds can obscure haze patterns. Additional parameters based on spectral analysis include wavelength and bandwidth requirements.

Burke, H. H. K.