Search NASA⌕ Search

Engineering topics

Barpanda, Prabeer

Publications and source records attributed to Barpanda, Prabeer.

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Calorimetric Study of Mixed Phosphates Na 4 M 3 (PO 4 ) 2 P 2 O 7 (M = Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ ) to Evaluate the Electrochemical Trends

Mixed polyanionic compounds have been studied extensively as viable cathode materials for sodium-ion batteries. Mixed phosphates, Na 4 M 3 (PO 4 ) 2 P 2 O 7 (M = Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ ), provide a low barrier for Na-ion diffusion, being advantageous in comparison to phosphates and pyrophosphates. The reported order of sodium extraction is ambiguous and remains unclear. Despite being structurally similar, electrochemical performance differs for all four analogues with different degrees of (de)sodiation, according to the transition element present. High-temperature oxide melt solution calorimetry has been used to establish the relation between thermodynamic phase stability and observed capacity for this series of mixed phosphates. Thermodynamic phase stability largely depends on the kind of structure, type of bonding, and size of the cations present. So, according to our results, the thermodynamic phase stability follows the order Na 4 Mn 3 (PO 4 ) 2 P 2 O 7 > Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 > Na 4 Co 3 (PO 4 ) 2 P 2 O 7 > Na 4 Ni 3 (PO 4 ) 2 P 2 O 7 . The thermodynamic studies serve as guidelines for the selection of compositions with the potential for fabricating advanced cathode materials with maximum performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A new high voltage alluaudite sodium battery insertion material

Large-scale stationary storage forms a key sector that can be economically served by sodium-ion batteries. In realizing practical sodium-ion batteries, discovery and development of novel cathodes is essential. In this spirit, alluaudite-type Na 2 Fe 2 (SO 4 ) 3 was reported in 2014 to have the highest Fe 3+ /Fe 2+ redox potential (~3.8 V vs. Na). This finding led to reports on various PO4 3– and SO4 2– based alluaudite compounds exhibiting high energy densities. In 2017, MoO 4 2– based alluaudite, Na 2.67 Mn 1.67 (MoO 4 ) 3 , was found as a 3.45 V cathode material. Exploring molybdenum chemistry further, this work reports alluaudite type Na 3.36 Co 1.32 (MoO 4 ) 3 (NCMo) as a novel versatile electroactive cathode for Li-ion and Na-ion batteries. It was synthesized by a wet solution-combustion route with a restricted annealing duration of 1 min at 600 °C. Calorimetric study revealed the formation enthalpy from component oxides (ΔH° f,ox = –575.49 ± 7.75 kJ/mol) to be highly exothermic. Unlike the sulfate class of alluaudites, this material is highly stable in air and moisture (ΔH ds = 537.42 ± 0.78 kJ/mol). Having an ionic conductivity of 6.065 × 10 –8 S/cm (at 50 °C), it offers a pseudo two-dimensional Na + migration pathway. Without any material optimization, NCMo was found to work as a high-voltage insertion cathode (ca. 4.0 V vs. Na/Na + and 4.1 V vs. Li/Li + ) in sync with theoretically predicted potential of 3.98 V (vs. Na/Na + ). Ex-situ X-ray diffraction and photoelectron spectroscopy studies revealed the occurrence of solid-solution redox mechanism solely involving Co 3+ /Co 2+ redox centre. Finally, it benchmarks Na 3.36 Co 1.32 (MoO 4 ) 3 as a novel electrochemically active Mo-based alluaudite-type polyanionic cathode insertion material.

25 ENERGY STORAGE↗
DOE OSTI2022

Facile synthesis and phase stability of Cu-based Na 2 Cu(SO 4 ) 2 · x H 2 O ( x = 0–2) sulfate minerals as conversion type battery electrodes

Mineral exploration forms a key approach for unveiling functional battery electrode materials. The synthetic preparation of naturally found minerals and their derivatives can aid in designing of new electrodes. Herein, saranchinaite Na 2 Cu(SO 4 ) 2 and its hydrated derivative kröhnkite Na 2 Cu(SO 4 ) 2 ·2H 2 O bisulfate minerals have been prepared using a facile spray drying route for the first time. The phase stability relation during the (de)hydration process was examined synergising in situ X-ray diffraction and thermochemical studies. Kröhnkite forms the thermodynamically stable phase as the hydration of saranchinaite to kröhnkite is highly exothermic (-51.51 ± 0.63 kJ mol -1 ). Structurally, kröhnkite offers a facile 2D pathway for Na+ ion migration resulting in 20 times higher total conductivity than saranchinaite at 60 °C. Both compounds exhibited a conversion redox mechanism for Li-ion storage with the first discharge capacity exceeding 650 mA h g -1 (at 2 mA g -1 vs. Li + /Li) upon discharge up to 0.05 V. Post-mortem analysis revealed that the presence of metallic Cu in the discharged state is responsible for high irreversibility during galvanostatic cycling. This study reaffirms the exploration of Cu-based polyanionic sulfates, which while having limited (de)insertion properties, can be harnessed for conversion-based electrode materials for batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Aqueous spray-drying synthesis of alluaudite Na 2+2x Fe 2–x (SO 4 ) 3 sodium insertion material: studies of electrochemical activity, thermodynamic stability, and humidity-induced phase transition

In pursuit of high-energy density sodium insertion materials, polyanionic frameworks can be designed with tuneable high-voltage operation stemming from inductive effect. Alluaudite Na 2 Fe 2 (SO 4 ) 3 polysulfate forms one such earth-abundant compound registering the highest Fe 3+ /Fe 2+ redox potential (ca. 3.8 V vs. Na/Na + ). While this SO 4 -based system exhibits high voltage operation, it is prone to thermal decomposition and moisture attack leading to hydrated derivatives, making its synthesis cumbersome. Also, the Na–Fe–S–O quaternary system is rich with (anhydrous to hydrated) phase transitions. Herein, we demonstrate scalable aqueous-based spray drying synthesis of alluaudite Na 2+2x Fe 2–x (SO 4 ) 3 sodium insertion material involving the formation of bloedite Na 2 Fe(SO 4 ) 2 ·4H 2 O as an intermediate phase. Moreover, a reversible phase transition from alluaudite to bloedite under controlled conditions of temperature and relative humidity is reported for the first time. Thermochemistry measurements revealed the enthalpies of formation (ΔH° f ) of alluaudite and bloedite are exothermic. Hydrated bloedite (ΔH° f = –117.16 ± 1.10 kJ/mol) was found to be significantly more energetically stable than anhydrous alluaudite (ΔH° f = –11.76 ± 1.25 kJ/mol). The calorimetric data support the observed synthesis and transformation (hydration-dehydration) pathways. Spray drying route led to spherical morphology delivering capacity ~80 mAh/g. Spray drying can be extended for rapid economic synthesis of sulfate class of battery materials.

25 ENERGY STORAGE↗