Search NASA⌕ Search

Engineering topics

Barrett, M.

Publications and source records attributed to Barrett, M..

Test of light-lepton universality in τ decays with the Belle II experiment

We present a measurement of the ratio R µ = $\mathcal{B}$($τ^- → µ^-\overline{ν}_µν_τ$)/$\mathcal{B}(τ^- → e^-\overline{ν}_eν_τ$) of branching fractions B of the τ lepton decaying to muons or electrons using data collected with the Belle II detector at the SuperKEKB e + e - collider. The sample has an integrated luminosity of 362 ± 2 fb -1 at a centre-of-mass energy of 10.58 GeV. Using an optimised event selection, a binned maximum likelihood ft is performed using the momentum spectra of the electron and muon candidates. The result, R µ = 0.9675 ± 0.0007 ± 0.0036, where the first uncertainty is statistical and the second is systematic, is the most precise to date. It provides a stringent test of the light-lepton universality, translating to a ratio of the couplings of the muon and electron to the W boson in τ decays of 0.9974 ± 0.0019, in agreement with the standard model expectation of unity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of branching-fraction ratios and CP asymmetries in B± → DCP±K± decays at Belle and Belle II

Abstract We report results from a study ofB ± → DK ± decays followed byDdecaying to theCP-even final stateK + K − and CP-odd final state$$ {K}_S^0{\pi}^0 $$ K S 0 π 0 , whereDis an admixture ofD 0 and$$ {\overline{D}}^0 $$ D ¯ 0 states. These decays are sensitive to the Cabibbo-Kobayashi-Maskawa unitarity-triangle angleϕ 3 . The results are based on a combined analysis of the final data set of 772×10 6 $$ B\overline{B} $$ B B ¯ pairs collected by the Belle experiment and a data set of 198×10 6 $$ B\overline{B} $$ B B ¯ pairs collected by the Belle II experiment, both in electron-positron collisions at the Υ(4S) resonance. We measure the CP asymmetries to be$$ \mathcal{A} $$ A CP+ = (+12.5±5.8±1.4)% and$$ \mathcal{A} $$ A CP− = (−16.7±5.7±0.6)%, and the ratios of branching fractions to be$$ \mathcal{R} $$ R CP+ = 1.164±0.081±0.036 and$$ \mathcal{R} $$ R CP− = 1.151±0.074±0.019. The first contribution to the uncertainties is statistical, and the second is systematic. The asymmetries$$ \mathcal{A} $$ A CP+ and$$ \mathcal{A} $$ A CP− have similar magnitudes and opposite signs; their difference corresponds to 3.5 standard deviations. From these values we calculate 68.3% confidence intervals of (8.5 ° <ϕ 3 < 16.5 ° ) or (84.5 ° <ϕ 3 < 95.5 ° ) or (163.3 ° <ϕ 3 < 171.5 ° ) and 0.321 B< 0.465.

Physics↗

Measurements of beam backgrounds in SuperKEKB Phase 2

The high design luminosity of the SuperKEKB electron-positron collider will result in challenging levels of beam-induced backgrounds in the interaction region. Understanding and mitigating these backgrounds is critical to the success of the Belle II experiment. We report on the first background measurements performed after roll-in of the Belle II detector, utilizing both the BEAST II system of dedicated background sensors and the Belle II detector itself. Here we also report on first revisions to the background simulation made in response to our findings. Backgrounds measured include contributions from synchrotron radiation, beam-gas, Touschek, and injection backgrounds. At the end of Phase 2, single-beam backgrounds originating from the 4 GeV positron Low Energy Ring (LER) agree reasonably well with simulation, while backgrounds from the 7 GeV electron High Energy Ring (HER) are approximately one order of magnitude higher than simulation. We extrapolate these backgrounds forward and conclude it is safe to proceed to installation of the Belle II vertex detector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurement of the integrated luminosity of the Phase 2 data of the Belle II experiment

From April to July 2018, a data sample at the peak energy of the Υ(4S) resonance was collected with the Belle II detector at the SuperKEKB electron-positron collider. This is the first data sample of the Belle II experiment. Using Bhabha and digamma events, we measure the integrated luminosity of the data sample to be (496.3±0.3±3.0)pb –1 , where the first uncertainty is statistical and the second is systematic. This work provides a basis for future luminosity measurements at Belle II.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The High Resolution Accelerometer Package (HiRAP) flight experiment summary for the first 10 flights

The High Resolution Accelerometer Package (HiRAP) instrument is a triaxial, orthogonal system of gas damped accelerometers with a resolution of 1 x 10(exp -6) g (1 micro-g). The purpose of HiRAP is to measure the low frequency component of the total acceleration along the orbiter vehicle (OV) body axes while the OV descends through the rarefied flow flight regime. Two HiRAP instruments have flown on a total of 10 Space Transport System (STS) missions. The aerodynamic component of the acceleration measurements was separated from the total acceleration. Instrument bias and orbiter mechanical system acceleration effects were incorporated into one bulk bias. The bulk bias was subtracted from the acceleration measurements to produce aerodynamic descent data sets for all 10 flights. The aerodynamic acceleration data sets were input to an aerodynamic coefficient model. The aerodynamic acceleration data and coefficient model were used to estimate the atmospheric density for the altitude range of 140 to 60 km and a downrange distance of 600 km. For 8 of 10 flights results from this model agree with expected results. For the results that do not agree with expected results, a variety of error sources have been explored.

Blanchard, Robert C.↗

Assessment and control of electrostatic charges

The experience is described of NASA and DOD with electrostatic problems, generation mechanisms, and type of electrostatic hazards. Guidelines for judging possible effects of electrostatic charges on space missions are presented along with mathematical formulas and definitions.

Barrett, M.↗