Engineering topics
Publications and source records attributed to Barth, Brian A..
Both equilibration time and the transfer of Winsor-III microemulsion systems from one container to another affect the structure of the bicontinuous phase in the vertical direction.
The effect of surfactant additives on electrochemical behavior in porous electrodes was investigated using vanadium redox flow battery half-cells and the dependence of volumetric kinetics and mass transport on electrolyte, surfactant, and electrode type was explored. Without surfactant added, carbon paper electrodes demonstrated greater kinetics and transport compared to carbon felt, for a given electrolyte. Additionally, posolyte kinetics are greater than negolyte kinetics by one to three orders of magnitude, depending on the electrode type. Addition of surfactant increased electrode wettability and possibly electrochemical surface area. However, this was accompanied by a decrease in volumetric mass transport, due to stronger electrolyte-electrode interactions. The presence of sodium dodecyl sulfate (SDS) influenced posolyte and negolyte kinetics differently. Kinetics showed a dependence on electrode type and surfactant. On carbon felt, volumetric kinetics decreased for both posolyte and negolyte with SDS addition. On carbon paper, SDS decreased volumetric kinetics for the posolyte but increased (>2X) kinetics for the negolyte! This kinetic enhancement depends on surfactant chemistry: cetyltrimethylammonium bromide, a cationic surfactant, failed to increase kinetics. Furthermore, SDS did not increase areal specific resistance. Furthermore, these findings show the superior performance of carbon paper compared to carbon felt and suggest SDS as a possible VRFB negolyte additive.
Aqueous and non-aqueous redox flow batteries (RFBs) have limited energy and current densities, respectively, due to the nature of the electrolytes. New approaches to electrolyte design are needed to improve the performance of RFBs. In this work, we combined a highly conductive aqueous phase and an organic redox-active phase in a microemulsion to formulate a novel RFB electrolyte. As a proof-of-concept, we demonstrate an RFB using this microemulsion electrolyte with maximum current density of 17.5 mA·cm −2 with a 0.19 M posolyte and 0.09 M negolyte at a flow rate of only ∼2.5 ml·min −1 , comparable to early vanadium electrolyte RFBs at similar flow rates on a per molar basis. The novel active negolyte component is an inexpensive oil-soluble vitamin (K 3 ). By combining aqueous and organic phases, the solvent potential window and energy density may be increased without sacrificing current density and new redox couples may be accessed. Microemulsion electrolytes show great promise for improved performance and increased energy densities in aqueous RFBs but the path forward is complex. We end with discussion of areas that need work to achieve the potential of these electrolytes.