Engineering topics

Barton, Gregg H.

Publications and source records attributed to Barton, Gregg H..

3 records

NASA NTRS2001

RADX34: A Future-X Demonstration of Autonomous Robust Abort Technologies on the X-34

The Charles Stark Draper Laboratory, Inc. has been conducting the RADX-34 Future-X Pathfinder Flight Demonstration experiment under the direction of the NASA Marshall Space Flight Center. The Future-X experiment will use the X-34 to demonstrate autonomous abort technologies needed for the next generation of reusable launch vehicles. This project will involve integration of real-time abort mission planning algorithms with the existing guidance and control to provide abort coverage for the low-Mach flights of the X-34. This paper describes the design and capability of the abort planner three months prior to the conclusion of its development. The mission planner described herein is able to respond to loss of thrust, determine which runways can be reached within the vehicle constraints, and designate an appropriate landing site. This project, when complete, will mark the first step in the development of the Next Generation of Guidance and Control (NGGC) autonomous algorithms. NGGC algorithms will help ensure the second generation of reusable launch vehicles will meet their cost, safety and reliability requirements.

Aron, Edward C.↗

NASA NTRS1999

Autonomous Intact Abort System for the X-34

Autonomous algorithms are developed which provide trajectory guidance for horizontally landing vehicles such as the X-34 under a variety of abort conditions. The nominal guidance system of the X-34 is incapable of directing the vehicle to a safe landing for many possible situations in which trajectory is far away from nominal conditions (as in the case of an engine failure). To minimize the risk of losing the vehicle, the autonomous intact abort system considers multiple landing sites and redesigns certain guidance inputs in order to adapt to the new conditions presented by the abort. The abort system design is demonstrated in a high-fidelity simulation to prove the feasibility of the concept for various engine-out These abort algorithms are being incorporated into the X-34 vehicle to flight test this new technology as a part of the Future X Pathfinder Flight Demonstration Program.

Tragesser, Steven G.↗

NASA NTRS1999

Autolanding Trajectory Design for the X-34

An Autolanding I-load Program (ALIP) is developed to design unpowered autolanding trajectories for the X-34 Mach 8 vehicle. The trajectory is comprised of geometric flight segments that are based on the shuttle approach and landing design (steep glideslope, circular flare, exponential flare to shallow glideslope). Enforcing physical constraints such as loads, vertical descent rate, continuity and smoothness reduces the design problem to a two point boundary value problem with conditions on the initial and final dynamic pressure. Finding a solution required the development of trajectory simulation techniques that constrained the flight profile to a prescribed geometry. The design methodology can be extended beyond the autolanding flight regime by repeating the series of geometric segments and solving multiple two-point boundary values problems (one for each series). The techniques described in this paper facilitate rapid design of reference trajectories.

Barton, Gregg H.↗