Search NASA⌕ Search

Engineering topics

Baskin, Artem

Publications and source records attributed to Baskin, Artem.

Enhanced Electrolyte Transport and Kinetics Mitigate Graphite Exfoliation and Li Plating in Fast–Charging Li–Ion Batteries

Despite significant progress in energy retention, lithium-ion batteries (LIBs) face untenable reductions in cycle life under extreme fast-charging (XFC) conditions, which primarily originate from a variety of kinetic limitations between the graphite anode and the electrolyte. Through quantitative Li + loss accounting and comprehensive materials analyses, it is directly observed that the operation of LIB pouch cells at 4 C||C/3 (charging||discharging) results in Li plating, disadvantageous solid-electrolyte-interphase formation, and solvent co-intercalation leading to interstitial decomposition within graphite layers. It is found that these failure modes originate from the insufficient properties of conventional electrolytes, where employing a designed ester-based electrolyte improved the capacity retention of these cells from 55.9% to 88.2% after 500 cycles when operated at the aforementioned conditions. These metrics are the result of effective mitigation of the aforementioned failure modes due to superior Li + transport and desolvation characteristics demonstrated through both experimental and computational characterization. Finally, this work reveals the vital nature of electrolyte design to XFC performance.

25 ENERGY STORAGE↗

A Minimal Information Set To Enable Verifiable Theoretical Battery Research

Batteries are an enabling technology for addressing sustainability through the electrification of various forms of transportation (1) and grid storage. (2) Batteries are truly multi-scale, multi-physics devices, and accordingly various theoretical descriptions exist to understand their behavior (3-5) ranging from atomistic details to techno-economic trends. As we explore advanced battery chemistries (6,7) or previously inaccessible aspects of existing ones, (8-10) new theories are required to drive decisions. (11-13) The decisions are influenced by the limitations of the underlying theory. Advanced theories used to understand battery phenomena are complicated and require substantial effort to reproduce. However, such constraints should not limit the insights from these theories. We can strive to make the theoretical research verifiable such that any battery stakeholder can assess the veracity of new theories, sophisticated simulations or elaborate analyses. We distinguish verifiability, which amounts to “Can I trust the results, conclusions and insights and identify the context where they are relevant?”, from reproducibility, which ensures “Would I get the same results if I followed the same steps?” With this motivation, we propose a checklist to guide future reports of theoretical battery research in Table 1. We hereafter discuss our thoughts leading to this and how it helps to consistently document necessary details while allowing complete freedom for creativity of individual researchers. Given the differences between experimental and theoretical studies, the proposed checklist differs from its experimental counterparts. (14,15) This checklist covers all flavors of theoretical battery research, ranging from atomic/molecular calculations (16-19) to mesoscale (20,21) and continuum-scale interactions, (9,22) and techno-economic analysis. (23,24) Finally, as more and more experimental studies analyze raw data, (25) we feel this checklist would be broadly relevant.

25 ENERGY STORAGE↗

Gold-like activity copper-like selectivity of heteroatomic transition metal carbides for electrocatalytic carbon dioxide reduction reaction

An overarching challenge of the electrochemical carbon dioxide reduction reaction (eCO 2 RR) is finding an earth-abundant, highly active catalyst that selectively produces hydrocarbons at relatively low overpotentials. Here, we report the eCO 2 RR performance of two-dimensional transition metal carbide class of materials. Our results indicate a maximum methane (CH 4 ) current density of -421.63 mA/cm 2 and a CH 4 faradic efficiency of 82.7% ± 2% for di-tungsten carbide (W 2 C) nanoflakes in a hybrid electrolyte of 3 M potassium hydroxide and 2 M choline-chloride. Powered by a triple junction photovoltaic cell, we demonstrate a flow electrolyzer that uses humidified CO 2 to produce CH 4 in a 700-h process under one sun illumination with a CO 2 RR energy efficiency of about 62.3% and a solar-to-fuel efficiency of 20.7%. Density functional theory calculations reveal that dissociation of water, chemisorption of CO 2 and cleavage of the C-O bond—the most energy consuming elementary steps in other catalysts such as copper—become nearly spontaneous at the W2C surface. This results in instantaneous formation of adsorbed CO—an important reaction intermediate—and an unlimited source of protons near the tungsten surface sites that are the main reasons for the observed superior activity, selectivity, and small potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diversity-oriented synthesis of polymer membranes with ion solvation cages

Microporous polymers feature shape-persistent free volume elements (FVEs), which are permeated by small molecules and ions when used as membranes for chemical separations, water purification, fuel cells, and batteries. It remains a significant challenge to identify FVEs with analyte specificity, due to difficulties in generating microporous polymer libraries with sufficient diversity for screening their properties. Here, we describe a diversity-oriented synthetic (DOS) strategy for microporous polymer membranes from which we identified those whose FVEs serve as solid solvation cages for lithium ions (Li + ). Furthermore, key elements of our strategy included diversification of bis(catechol)-type monomers via multi-component Mannich reactions to introduce Li+-coordinating functionality within individual FVEs, topology-enforcing polymerizations for generating macromolecular skeletal diversity for networking FVEs into different pore architectures, and several classes of on-polymer reactions for diversifying pore geometries and dielectric properties. Lead candidate polymer membranes featuring explicit ion solvation cages exhibited both higher ionic conductivity and higher cation transference number than control membranes where FVEs were aspecific, which indicates conventional bounds for membrane permeability and selectivity for ion transport can be overcome.4 These advantages are tied to enhanced Li + partitioning from the electrolyte when the cages are present, higher diffusion barriers for anions within the pores, and network-enforced restrictions on the number of solvent molecules bound to Li+ by comparison to the bulk electrolyte, which reduces the effective mass of the working ion. Such membranes show promise as anode-stabilizing interlayers in high-voltage lithium-metal batteries for electric mobility.

42 ENGINEERING↗

Ion Solvation Engineering: How to Manipulate the Multiplicity of the Coordination Environment of Multivalent Ions

During free energy analysis of solvation structures of free divalent cations, their ion pairs, and neutral aggregates in low dielectric solvents reveals the multiplicity of thermodynamically stable cation solvation configurations and identifies the micro- and macroscopic factors responsible for this phenomenon. Specifically, we show the role of ion-solvent interactions and solvent mixtures in determining the cation solvation free energy landscapes. We show that it is the entropic contribution of solvent degrees of freedom that is responsible for the solvation multiplicity, and the mutual balance between enthalpic and entropic forces or their concerted contributions is what ultimately defines the most stable ion solvation configuration and creates new ones. We show general consequences of ion solvation multiplicity on thermodynamics of complex electrolytes, specifically in the context of homogeneous or interfacial charge transfer. Identified factors and their interplay provide a pathway to formulation of solvation design rules that can be used to control bulk solvation, interfacial chemistry, and charge transfer. Our findings also suggest experimentally testable predictions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrathin Free-Standing Oxide Membranes for Electron and Photon Spectroscopy Studies of Solid–Gas and Solid–Liquid Interfaces

Free-standing ultrathin (~2 nm) films of several oxides (Al 2 O 3 ,TiO 2 , and others) have been developed, which are mechanically robust and transparent to electrons with E kin ≥ 200 eV and to photons. We demonstrate their applicability in environmental X-ray photoelectron and infrared spectroscopy for molecular level studies of solid-gas (≥1 bar) and solid-liquid interfaces. These films act as membranes closing a reaction cell and as substrates and electrodes for electrochemical reactions. The remarkable properties of such ultrathin oxides membranes enable atomic/molecular level studies of interfacial phenomena, such as corrosion, catalysis, electrochemical reactions, energy storage, geochemistry, and biology, in a broad range of environmental conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Addressing the sensitivity of signals from solid/liquid ambient pressure XPS (APXPS) measurement

Ambient pressure XPS has demonstrated its great potential in probing the solid/liquid interface, which is a central piece in electrocatalytic, corrosion, and energy storage systems. Additionally, despite the advantage of ambient pressure XPS being a surface sensitive characterization technique, the ability of differentiating the surface adsorbed species (~Å scale) and bulk electrolyte (~10 nm scale) in the spectrum depends on the delicate balance between bulk solution concentration (C), surface coverage (θ), bulk liquid layer thickness (L), and inelastic mean free path (λ) as a function of photon energy. By investigating a model system of gold dissolving in a bromide solution, the connection between theoretical prediction at the atomic resolution and macroscopic observable spectrum is established.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Infrared Nanospectroscopy at the Graphene–Electrolyte Interface

We present a new methodology that enables studies of the molecular structure of graphene-liquid interfaces with nanoscale spatial resolution. It is based on Fourier transform infrared nanospectroscopy (nano-FTIR), where the infrared (IR) field is plasmonically enhanced near the tip apex of an atomic force microscope (AFM). The graphene seals a liquid electrolyte reservoir while acting also as a working electrode. The photon transparency of graphene enables IR spectroscopy studies of its interface with liquids, including water, propylene carbonate, and aqueous ammonium sulfate electrolyte solutions. Here, we illustrate the method by comparing IR spectra obtained by nano-FTIR and attenuated total reflection (which has a detection depth of a few microns) demonstrating that the nano-FTIR method makes it possible to determine changes in speciation and ion concentration in the electric double and diffuse layers as a function of bias.

36 MATERIALS SCIENCE↗

Identifying Catalytic Active Sites of Trimolybdenum Phosphide (Mo 3 P) for Electrochemical Hydrogen Evolution

Solid-state electrocatalysis plays a crucial role in the development of renewable energy to reshape current and future energy needs. However, finding an inexpensive and highly active catalyst to replace precious metals remains a big challenge for this technology. Here, tri-molybdenum phosphide (Mo 3 P) is found as a promising nonprecious metal and earth-abundant candidate with outstanding catalytic properties that can be used for electrocatalytic processes. The catalytic performance of Mo3P nanoparticles is tested in the hydrogen evolution reaction (HER). The results indicate an onset potential of as low as 21 mV, H 2 formation rate, and exchange current density of 214.7 µmol s -1 g -1 cat (at only 100 mV overpotential) and 279.07 µA cm -2 , respectively, which are among the closest values yet observed to platinum. Combined atomic-scale characterizations and computational studies confirm that high density of molybdenum (Mo) active sites at the surface with superior intrinsic electronic properties are mainly responsible for the remarkable HER performance. The density functional theory calculation results also confirm that the exceptional performance of Mo 3 P is due to neutral Gibbs free energy (ΔG H* ) of the hydrogen (H) adsorption at above 1/2 monolayer (ML) coverage of the (110) surface, exceeding the performance of existing non-noble metal catalysts for HER.

Active sites↗

Exploring chemical speciation at electrified interfaces using detailed continuum models

We present a local free-energy functional-based generic continuum model for material interfaces with a specific emphasis on electrified solid/liquid interfaces. The model enables a description of multicomponent phases at interfaces and includes the effects of specific non-electrostatic interactions (specific adsorption), ion size disparity, and the explicit presence of neutral species. In addition to the optimization of electrostatic, non-electrostatic, and steric forces, the model can be easily modified to explore the effects of other channels for equilibration, including local chemical transformations driven by equilibrium constants and electrochemical reactions driven by the electrode potential. In this way, we show that, upon accounting for these effects, local speciation in the vicinity of the interface can be drastically different from what is expected from restricted models and minor species (from the bulk perspective) may become dominant due to the effects of local pH. We evaluate the ionic contribution to the surface tension at the interface and show how this could impact the structure of air/liquid interfaces. On the same footing, an attempt to describe electrochemical metal dissolution is made. The model allows estimates of the mutual population of newly produced ions depending on their charge and size and could be useful for interpretation of electrochemical and spectroscopic measurements if the dissolution involves different metal ions (species). With these advances, the proposed model may be used as an ingredient within a hybrid ab initio-continuum methodology to model biased interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular-Scale Structure of Electrode–Electrolyte Interfaces: The Case of Platinum in Aqueous Sulfuric Acid

Knowledge of the molecular composition and electronic structure of electrified solid-liquid interfaces is key to understanding elemental processes in heterogeneous reactions. Using X-ray absorption spectroscopy in the interface-sensitive electron yield mode (EY-XAS), first-principles electronic structure calculations, and multiscale simulations, we determined the chemical composition of the interfacial region of a polycrystalline platinum electrode in contact with aqueous sulfuric acid solution at potentials between the hydrogen and oxygen evolution reactions. We found that between 0.7 and 1.3 V vs Ag/AgCl the electrical double layer (EDL) region comprises adsorbed sulfate ions with hydrated hydronium ions in the next layer. No evidence was found for bisulfate or Pt-O/Pt-OH species, which have very distinctive spectral signatures. In addition to resolving the long-standing issue of the EDL structure, our work establishes interface- and element-sensitive EY-XAS as a powerful spectroscopic tool for studying condensed phase, buried solid-liquid interfaces relevant to various electrochemical processes and devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Instability at the Electrode/Electrolyte Interface Induced by Hard Cation Chelation and Nucleophilic Attack

Electrochemistry is necessarily a science of interfacial processes, and understanding electrode/electrolyte interfaces is essential to controlling electrochemical performance and stability. Undesirable interfacial interactions hinder discovery and development of rational materials combinations. By example, we examine an electrolyte, magnesium(II) bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 ) dissolved in diglyme, next to the Mg metal anode, which is purported to have a wide window of electrochemical stability. However, even in the absence of any bias, using in situ tender X-ray photoelectron spectroscopy, we discovered an intrinsic interfacial chemical instability of both the solvent and salt, further explained using first-principles calculations as driven by Mg 2+ dication chelation and nucleophilic attack by hydroxide ions. The proposed mechanism appears general to the chemistry near or on metal surfaces in hygroscopic environments with chelation of hard cations and indicates possible synthetic strategies to overcome chemical instability within this class of electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Macromolecular Design Strategies for Preventing Active-Material Crossover in Non-Aqueous All-Organic Redox-Flow Batteries

Intermittent energy sources, including solar and wind, require scalable, low-cost, multi-hour energy storage solutions in order to be effectively incorporated into the grid. All-Organic non-aqueous redox-flow batteries offer a solution, but suffer from rapid capacity fade and low Coulombic efficiency due to the high permeability of redox-active species across the battery's membrane. In this paper, we show that active-species crossover is arrested by scaling the membrane's pore size to molecular dimensions and in turn increasing the size of the active material above the membrane's pore-size exclusion limit. When oligomeric redox-active organics (RAOs) were paired with microporous polymer membranes, the rate of active-material crossover was reduced more than 9000-fold compared to traditional separators at minimal cost to ionic conductivity. This corresponds to an absolute rate of RAO crossover of less than 3 μmol cm -2 day -1 (for a 1.0 m concentration gradient), which exceeds performance targets recently set forth by the battery industry. Finally, this strategy was generalizable to both high and low-potential RAOs in a variety of non-aqueous electrolytes, highlighting the versatility of macromolecular design in implementing next-generation redox-flow batteries.

25 ENERGY STORAGE↗

Exploration of the Detailed Conditions for Reductive Stability of Mg(TFSI) 2 in Diglyme: Implications for Multivalent Electrolytes

In this paper, we reveal the general mechanisms of partial reduction of multivalent complex cations in conditions specific for the bulk solvent and in the vicinity of the electrified metal electrode surface and disclose the factors affecting the reductive stability of electrolytes for multivalent electrochemistry. Using a combination of ab initio techniques, we clarify the relation between the reductive stability of contact-ion pairs comprising a multivalent cation and a complex anion, their solvation structures, solvent dynamics, and the electrode overpotential. We found that for ion pairs with multiple configurations of the complex anion and the Mg cation whose available orbitals are partially delocalized over the molecular complex and have antibonding character, the primary factor of the reductive stability is the shape factor of the solvation sphere of the metal cation center and the degree of the convexity of a polyhedron formed by the metal cation and its coordinating atoms. We focused specifically on the details of Mg (II) bis(trifluoromethanesulfonyl)imide in diethylene glycol dimethyl ether (Mg(TFSI) 2 )/diglyme) and its singly charged ion pair, MgTFSI + . In particular, we found that both stable (MgTFSI) + and (MgTFSI) 0 ion pairs have the same TFSI configuration but drastically different solvation structures in the bulk solution. This implies that the MgTFSI/dyglyme reductive stability is ultimately determined by the relative time scale of the solvent dynamics and electron transfer at the Mg–anode interface. In the vicinity of the anode surface, steric factors and hindered solvent dynamics may increase the reductive stability of (MgTFSI) + ion pairs at lower overpotential by reducing the metal cation coordination, in stark contrast to the reduction at high overpotential accompanied by TFSI decomposition. By examining other solute/solvent combinations, we conclude that the electrolytes with highly coordinated Mg cation centers are more prone to reductive instability due to the chemical decomposition of the anion or solvent molecules. Finally, the obtained findings disclose critical factors for stable electrolyte design and show the role of interfacial phenomena in reduction of multivalent ions.

36 MATERIALS SCIENCE↗