Engineering topics

Batson, B. H.

Publications and source records attributed to Batson, B. H..

At least 19 records

NASA NTRS1985

Shuttle payload S-band communications system

The Shuttle payload S-band communications system design, operational capabilities, and performance are described in detail. System design requirements, overall system and configuration and operation, and laboratory/flight test results are presented. Payload communications requirements development is discussed in terms of evolvement of requirements as well as the resulting technical challenges encountered in meeting the initial requirements. Initial design approaches are described along with cost-saving initiatives that subsequently had to be made. The resulting system implementation that was finally adopted is presented along with a functional description of the system operation. A description of system test results, problems encountered, how the problems were solved, and the system flight experience to date is presented. Finally, a summary of the advancements made and the lessons learned is discussed.

Batson, B. H.↗

NASA NTRS1982

Digital TV tri-state delta modulation system for Space Shuttle ku-band downlink

A tri-state delta modulation/demodulation (TSDM) technique which provides for efficient run-length coding of constant-intensity segments of a TV picture is described. Aspects of the hardware implementation of a high-speed TSDM transmitter and receiver for black-and-white TV or field-sequential color or NTSC format color are reviewed. Run-length encoding of the TSDM output can consistently reduce the required channel data rate well below one bit per sample. As compared with a bistate delta modulation system, the present technique eliminates granularity in the reconstructed video without degrading rise or fall times. About 40 chips are used by TSDM when used to handle the luminance information in a color link. A possible overall space and ground functional configuration to accommodate Shuttle digital TV with scrambling for privacy is presented.

Udalov, S.↗

NASA NTRS1981

Tri-state delta modulation system for Space Shuttle digital TV downlink

Future requirements for Shuttle Orbiter downlink communication may include transmission of digital video which, in addition to black and white, may also be either field-sequential or NTSC color format. The use of digitized video could provide for picture privacy at the expense of additional onboard hardware, together with an increased bandwidth due to the digitization process. A general objective for the Space Shuttle application is to develop a digitization technique that is compatible with data rates in the 20-30 Mbps range but still provides good quality pictures. This paper describes a tri-state delta modulation/demodulation (TSDM) technique which is a good compromise between implementation complexity and performance. The unique feature of TSDM is that it provides for efficient run-length encoding of constant-intensity segments of a TV picture. Axiomatix has developed a hardware implementation of a high-speed TSDM transmitter and receiver for black-and-white TV and field-sequential color. The hardware complexity of this TSDM implementation is summarized in the paper.

Udalov, S.↗

NASA NTRS1980

Performance of code division multiple access systems

The performance of code division multiple-access (CDMA) systems is determined using direct sequence spectral spreading. Under relatively ideal conditions, the degradation in system performance as a function of the number of users is shown to have a threshold effect. This basic limitation in the number of users of the system is further limited if the powers are unequal. For two users, system performance as a function of their power ratio also has a threshold effect. System performance as a function of the amount of spectral spreading is determined. The performance of both coded and uncoded systems is predicted.

Weber, C. L.↗

NASA NTRS1980

Performance considerations of frequency-hopping multiple access

The basic system parameters of a frequency-hopping multiple-access system are investigated. Noncoherent binary FSK and M-ary FSK signal formats are studied in a random-access asynchronous environment. Both slow and fast frequency hopping are considered. Under relatively ideal conditions, the degradation in performance with respect to the number of users is determined. The dependence on performance due to hopping rate and bandwidth constraint is developed. It is shown, for example, that, for fast hopping, the optimum hopping rate is that which spreads the users' power over the entire available bandwidth during each baud time. This agrees with the basic spread spectrum philosophy of making the signal appear white over as wide a bandwidth as possible. The computational results describe the trade-off between the number of tones in M-ary FSK and the number of hops per symbol. Given a specified number of tones in the frequency-hopping system, the results describe the manner in which the system degrades as the number of users is increased.

Weber, C. L.↗

NASA NTRS1979

Spread spectrum techniques for the Space Shuttle

The Space Shuttle will employ spread spectrum techniques for both communication and navigation. During on-orbit phases of flight, two-way S-band and Ku-band communication links between the Shuttle and the ground will be available via the tracking and data relay satellite system (TDRSS). A pseudonoise (PN) code will spread the forward-link data spectrum from 32 kbps to 216 kbps to reduce the signal spectral density impinging on the earth's surface, with the S-band code search and acquisition being performed at C/NO-values of around 5 dB-Hz, and with a code length of 2047 chips at a rate of 11.232 Mchips/sec. C/NO-values in the region of 60 dB-Hz to 63 dB-Hz will characterize PN code acquisition in the Ku-band, whose forward-link PN clock is 3.03 Mchips/sec on a 1023-chip length sequence. Primary operational navigation will be provided by the Global Positioning System (GPS), which, after measuring transit time of the PN spread spectrum signal between a number of GPS satellites and itself, scales it by the velocity of light. GPS will enable position estimation accuracy to 30 feet and velocity estimation accuracy to 0.02 ft/sec.

Batson, B. H.↗

NASA NTRS1978

Effects of data asymmetry on Shuttle Ku-band communications link performance

This paper systematically analyzes the signal-to-noise ratio degradations which can potentially occur due to data asymmetry in digital transmission systems. Suitable asymmetry models are developed and error probability performance for various types of data detectors (integrate-and-dump filter, filter-sample detector, and gated-integrate-and-dump filter) is derived. Although this work was done to resolve problems being encountered in the Shuttle Ku-band return link design, specifically for the 50 Mbit/s convolutionally encoded channel (NRZ format), generalizations are made which provide results for other cases of interest (other Ku-band return link channels, or other systems entirely). This paper therefore considers Manchester data formats (in addition to NRZ) and uncoded transmission (in addition to convolutionally coded transmission). The effects of bandlimiting are also considered.

Simon, M. K.↗

NASA NTRS1978

Potential digitization/compression techniques for Shuttle video

The Space Shuttle initially will be using a field-sequential color television system but it is possible that an NTSC color TV system may be used for future missions. In addition to downlink color TV transmission via analog FM links, the Shuttle will use a high resolution slow-scan monochrome system for uplink transmission of text and graphics information. This paper discusses the characteristics of the Shuttle video systems, and evaluates digitization and/or bandwidth compression techniques for the various links. The more attractive techniques for the downlink video are based on a two-dimensional DPCM encoder that utilizes temporal and spectral as well as the spatial correlation of the color TV imagery. An appropriate technique for distortion-free coding of the uplink system utilizes two-dimensional HCK codes.

Habibi, A.↗

NASA NTRS1977

Space Shuttle utilization of TDRSS services

This paper provides a general description of how the tracking and data relay satellite system (TDRSS) will be utilized by the Space Shuttle. The design approaches which were necessitated for both the Shuttle S-band and Ku-band subsystems are functionally described, and current performance estimates are summarized for each communications link. The operational advantages and disadvantages of TDRSS to Shuttle are briefly considered, and both the technical and operational problem areas which have been identified to date are described.

Batson, B. H.↗

NASA NTRS1977

Payload data processing for the Space Shuttle program

The paper examines communications and data handling services that the Space Shuttle will provide for payloads and discusses mission and data processing capabilities. Uses of these capabilities are considered, and the Orbiter data processing system is described. Functional scientific data interfaces for attached payloads and functional system status data interfaces for attached payloads are indicated.

Batson, B. H.↗

NASA NTRS1977

Shuttle Ku-band bent-pipe implementation considerations

This paper describes an approach for relay of data-modulated subcarriers from Shuttle payloads through the Shuttle Ku-band communications subsystem (and subsequently through a tracking and data relay satellite system to a ground terminal). The novelty is that a channel originally provided for baseband digital data is shown to be suitable for this purpose; the resulting transmission scheme is referred to as a narrowband bent-pipe scheme. Test results demonstrating the validity of the narrowband bent-pipe mode are presented, and limitations on system performance are described.

Batson, B. H.↗

NASA NTRS1976

Convolutional coding at 50 Mbps for the Shuttle Ku-band return link

Error correcting coding is required for 50 Mbps data link from the Shuttle Orbiter through the Tracking and Data Relay Satellite System (TDRSS) to the ground because of severe power limitations. Convolutional coding has been chosen because the decoding algorithms (sequential and Viterbi) provide significant coding gains at the required bit error probability of one in 10 to the sixth power and can be implemented at 50 Mbps with moderate hardware. While a 50 Mbps sequential decoder has been built, the highest data rate achieved for a Viterbi decoder is 10 Mbps. Thus, five multiplexed 10 Mbps Viterbi decoders must be used to provide a 50 Mbps data rate. This paper discusses the tradeoffs which were considered when selecting the multiplexed Viterbi decoder approach for this application.

Batson, B. H.↗

NASA NTRS1975

Digital speech processing for the Space Shuttle program

This paper describes the voice digitization technique which has been selected for the Space Shuttle program. The selected approach is compatible with a time-division multiplexing scheme which combines one or two digital voice channels with commands prior to transmission over an RF uplink or with telemetry prior to transmission over an RF downlink.

Batson, B. H.↗

NASA NTRS1975

Space Shuttle adaptive delta modulator design and performance

This paper describes the detailed design of the voice digitization technique which has been selected for the Space Shuttle Program. Measured performance results are discussed and the projected characteristics of Shuttle flight hardware are described.

Batson, B. H.↗

NASA NTRS1975

Simplified APC for Space Shuttle applications

This paper describes an 8 kbps adaptive predictive digital speech transmission system which was designed for potential use in the Space Shuttle Program. The system was designed to provide good voice quality in the presence of both cabin noise on board the Shuttle and the anticipated bursty channel. Minimal increase in size, weight, and power over the current high data rate system was also a design objective.

Hutchins, S. E.↗

NASA NTRS1974

Coding/modulation trade-offs for Shuttle wideband data links

This paper describes various modulation and coding schemes which are potentially applicable to the Shuttle wideband data relay communications link. This link will be capable of accommodating up to 50 Mbps of scientific data and will be subject to a power constraint which forces the use of channel coding. Although convolutionally encoded coherent binary PSK is the tentative signal design choice for the wideband data relay link, FM techniques are of interest because of the associated hardware simplicity and because an FM system is already planned to be available for transmission of television via relay satellite to the ground. Binary and M-ary FSK are considered as candidate modulation techniques, and both coherent and noncoherent ground station detection schemes are examined. The potential use of convolutional coding is considered in conjunction with each of the candidate modulation techniques.

Batson, B. H.↗

NASA NTRS1974

An all-digital Manchester symbol synchronizer for Space Shuttle

The Shuttle S-Band relay communications links via TDRS are coded and may operate at symbol signal-to-noise ratios (Es/No) as low as -5dB. A brass-board all-digital bit synchronizer with very low (0.05dB) degradation relative to an idealized analog model has been designed to process the 216 KBPS Manchester data symbols. This all-digital bit synchronizer, which provides soft decision detected outputs to a convolutional decoder, may be operated at any rate below 216 KBPS by merely changing the master clock frequency.

Batson, B. H.↗

NASA NTRS1974

Space Shuttle communications and tracking system

The Space Shuttle Program is briefly described, and the major program milestones (first horizontal flight, first vertical flight, and initial operational capability) extending over a period from 1976 to 1978 are reviewed. The communications and tracking requirements, and the system developed to meet them, are discussed for the ascent, on-orbit, reentry, and landing phases of a Shuttle mission.

Batson, B. H.↗