Search NASA⌕ Search

Engineering topics

Bauge, E

Publications and source records attributed to Bauge, E.

The Neutrons for Science Facility at SPIRAL-2

The ''Neutrons for Science''(NFS) facility will be a component of SPIRAL-2, the future accelerator dedicated to the production of very intense radioactive ion beams, under construction at GANIL in Caen (France). NFS will be composed of a pulsed neutron beam for in-flight measurements and irradiation stations for cross-section measurements and material studies. Continuous and quasi-monokinetic energy spectra will be available at NFS respectively produced by the interaction of deuteron beam on thick a Be converter and by the {sup 7}Li(p,n) reaction on a thin converter. The flux at NFS will be up to 2 orders of magnitude higher than those of other existing time-of-flight facilities in the 1 MeV to 40 MeV range. NFS will be a very powerful tool for physics and fundamental research as well as applications like the transmutation of nuclear waste, design of future fission and fusion reactors, nuclear medicine or test and development of new detectors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

7D-folding integral in a density-dependent microscopic optical model potential for nucleon-nucleus scattering

Microscopic optical model potentials, based on density-dependent effective interactions, involve multidimensional integrals to account for the full Fermi motion of the target struck nucleon throughout the nucleus. If a spherical matter distribution is assumed, then each matrix element of the optical potential requires the evaluation of seven-dimensional integrals. In this work we provide a full account of these integrals, retaining the genuine off-shell structure of the nucleon-nucleon effective interaction. The evaluation is based on the asymptotic separation of the optical model potential for nucleon-nucleus scattering in momentum space, where the potential is split into a free t-matrix contribution and another which depends exclusively on the gradient of the density-dependent g matrix. The calculated potentials, based on the Paris nucleon-nucleon (NN) potential, are applied to proton elastic scattering from {sup 16}O and {sup 90}Zr at beam energies between 30 and 65 MeV. The results were compared with two approximations to the unabridged expression, revealing moderate differences among their scattering observables. When comparing with results based on the Argonne v{sub 18} NNpotential, these differences appear smaller than those attainable by the choice of the internucleon potential.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurements of actinide-fission product yields in Caliban and Prospero metallic core reactor fission neutron fields

In the 1970's and early 1980's, an experimental program was performed on the facilities of the CEA Valduc Research Center to measure several actinide-fission product yields. Experiments were, in particular, completed on the Caliban and Prospero metallic core reactors to study fission-neutron-induced reactions on {sup 233}U, {sup 235}U, and {sup 239}Pu. Thick actinide samples were irradiated and the number of nuclei of each fission product was determined by gamma spectrometry. Fission chambers were irradiated simultaneously to measure the numbers of fissions in thin deposits of the same actinides. The masses of the thick samples and the thin deposits were determined by mass spectrometry and alpha spectrometry. The results of these experiments will be fully presented in this paper for the first time. A description of the Caliban and Prospero reactors, their characteristics and performances, and explanations about the experimental approach will also be given in the article. A recent work has been completed to analyze and reinterpret these measurements and particularly to evaluate the associated uncertainties. In this context, calculations have also been carried out with the Monte Carlo transport code Tripoli-4, using the published benchmarked Caliban description and a three-dimensional model of Prospero, to determine the average neutron energy causing fission. Simulation results will be discussed in this paper. Finally, new fission yield measurements will be proposed on Caliban and Prospero reactors to strengthen the results of the first experiments. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Microscopic model approach to (n,xn) pre-equilibrium reactions for medium-energy neutrons

We report on microscopic model calculations of the first step of direct pre-equilibrium (n,xn) emission in neutron interaction with {sup 90}Zr and {sup 208}Pb below 20 MeV. Our model is based on both an accurate description of the target excited states, provided by the self-consistent random-phase approximation (RPA) method implemented with the Gogny D1S force, and well-established in-medium two-body forces to represent the residual nucleon-nucleon interaction for the inelastic processes. Two goals have been achieved: The present microscopic approach provides a unified description of collective state excitations and the pre-equilibrium one-step process, and our reaction model reproduces the available data fairly well, without any parameter adjustment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fission Product Yields of {sup 233}U, {sup 235}U, {sup 238}U and {sup 239}Pu in Fields of Thermal Neutrons, Fission Neutrons and 14.7-MeV Neutrons

The yields of more than fifteen fission products have been carefully measured using radiochemical techniques, for {sup 235}U(n,f), {sup 239}Pu(n,f) in a thermal spectrum, for {sup 233}U(n,f), {sup 235}U(n,f), and {sup 239}Pu(n,f) reactions in a fission neutron spectrum, and for {sup 233}U(n,f), {sup 235}U(n,f), {sup 238}U(n,f), and {sup 239}Pu(n,f) for 14.7 MeV monoenergetic neutrons. Irradiations were performed at the EL3 reactor, at the Caliban and Prospero critical assemblies, and at the Lancelot electrostatic accelerator in CEA-Valduc. Fissions were counted in thin deposits using fission ionization chambers. The number of fission products of each species were measured by gamma spectrometry of co-located thick deposits.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron-induced fission cross sections of short-lived actinides with the surrogate reaction method.

Neutron-induced fission cross sections for {sup 242,243}Cm and {sup 241}Am have been obtained with the surrogate reaction method. Recent results for the neutron-induced cross section of {sup 243}Cm are questioned by the present data. For the first time, the {sup 242}Cm cross section has been determined up to the onset of second-chance fission. The good agreement at the lowest excitation energies between the present results and the existing neutron-induced data indicates that the distributions in spin and parity of states populated with both techniques are similar.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement/Evaluation Techniques and Nuclear Data Associated with Fission of 239Pu by Fission Spectrum Neutrons

This Panel was chartered to review and assess new evaluations of work on fission product data, as well as the evaluation process used by the two U.S. nuclear weapons physics laboratories. The work focuses on fission product yields resulting from fission spectrum neutrons incident on plutonium, and includes data from measurements that had not been previously published as well as new or revised fission product cumulative yield data, and related quantities such as Q values and R values. This report documents the Panel's assessment of the work presented by Los Alamos National Laboratory (LANL) and Lawrence Livermore National Laboratory (LLNL). Based on the work presented we have seven key observations: (1) Experiments conducted in the 1970s at LANL, some of which were performed in association with a larger, NIST-led, program, have recently been documented. A preliminary assessment of this work, which will be referred to in this document as ILRR-LANL, shows it to be technically sound. (2) LLNL has done a thorough, unbiased review and evaluation of the available literature and is in the process of incorporating the previously unavailable LANL data into its evaluation of key fission product yields. The results of the LLNL effort, which includes a preliminary evaluation of the ILRR-LANL data, have been documented. (3) LANL has also conducted an evaluation of fission product yields for fission spectrum neutrons on plutonium including a meta-analysis of benchmark data as part of a planned upgrade to the ENDF/B compilation. We found that the approach of using meta-analysis provides valuable additional insight for evaluating the sparse data sets involved in this assessment. (4) Both laboratories have provided convincing evidence for energy dependence in the fission product yield of {sup 147}Nd produced from the bombardment of {sup 239}Pu with fission spectrum neutrons over an incident neutron energy range of 0.2 to 1.9 MeV. (5) Consistent, complete, and explicit treatment of both systematic and statistical uncertainties, including correlations, are critical to the assessment of both the experimental measurements (due to variations between experimental techniques, irradiation conditions, calibration procedures, etc.), and the evaluation of those experiments to extract fundamental nuclear data. A clear example of the importance of uncertainty analysis is in the justification for energy-dependent {sup 147}Nd fission product yield, where the magnitude of the effect is comparable to the uncertainties of the individual fission product yield measurements. Both LANL and LLNL are committed to the inclusion of full uncertainty analysis in their evaluations. (6) The Panel reviewed in detail two methods for determining/evaluating fission product yields from which fission assessments can be made: the K factor method and high-resolution gamma spectroscopy (both described more fully in Sections 3 and 4). The panel concluded that fission product yields, and thus fission assessments, derived using either approach are equally valid, provided that the data were obtained from well understood, direct fission measurements and that the key underlying calibrations and/or data are valid for each technique. (7) The Panel found the process of peer review of the two complementary but independent methods to be an extremely useful exercise. Although work is still ongoing and the numbers presented to the Panel may change slightly, both groups are now in much better agreement on not just one, but four key fission product yields. The groups also have a better appreciation of the strengths and weaknesses of each other's methods.

42 ENGINEERING↗

Towards Universal Predictions with the TALYS Code

The increasing need for cross sections far from the valley of stability, for astrophysical as well as advanced technological applications poses a challenge for nuclear reaction models. So far, nuclear reaction cross sections calculations have relied on more or less phenomenological approaches, depending on several parameters that are adjusted, to available experimental data, or deduced from systematical relations. While such calculations are expected to be reliable for nuclei not too far from the experimentally known regions, it is clearly preferable to use more fundamental approaches, based on sound physical bases, when dealing with very exotic nuclei. Thanks to the high computer power available today, all the ingredients required to model a nuclear reaction can now be microscopically (or semi-microscopically) determined starting from a nucleon-nucleon effective interaction as sole input, and are available to the nuclear physics community. We have recently implemented all these microscopic ingredients in the TALYS nuclear reaction code, and we are now able to perform fully microscopic cross section calculations. We will discuss both the quality of these ingredients and the impact of using them instead of the usually adopted phenomenological parameters.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fission Cross Sections and Fission-Fragment Mass Yields via the Surrogate Reaction Method

The surrogate reaction method is a powerful tool to infer neutron-induced data of short-lived nuclei. After a short overview of the experimental techniques employed in the present surrogate experiments, we will concentrate on a recent measurement to determine neutron-induced fission cross sections for the actinides {sup 242,243}Cm and {sup 241}Am. The latest direct neutron-induced measurement for the {sup 243}Cm fission cross section is questioned by our results, since there are differences of more than 60% in the 0.7 to 7 MeV neutron energy range. Our experimental set-up has also enabled us to measure for the first time the fission fragment ''pseudo-mass'' distributions of {sup 243,244,245}Cm and {sup 242}Am compound nuclei in the excitation energy range from a few MeV to about 25 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Challenging Nuclear Structure Models Through a Microscopic Description of Proton Inelastic Scattering off 208Pb

A fully microscopic calculation of inelastic proton scattering off {sup 208}Pb is presented, and compared to experimental scattering data for incident proton energies between 65 and 201 MeV. By constructing the nucleon-nucleus interaction through the folding of nuclear structure information with a reliable nucleon-nucleon effective interaction that has no adjusted parameter, a consistent framework is built, for probing the influence of different descriptions of nuclear structure on nucleon inelastic scattering predictions. The absence of phenomenological normalization in this framework guarantees a unique and unambiguous interpretation of our calculations in terms of quality of the underlying nuclear structure description: a feature that had been reserved, until recently, to the electron probe. This tool is used to investigate the effect of long range correlations embedded in excited states, on calculated inelastic observables, demonstrating the sensitivity of nucleon scattering predictions to details of the nuclear structure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗