Search NASA⌕ Search

Engineering topics

Bauschlicher, C. W., Jr.

Publications and source records attributed to Bauschlicher, C. W., Jr..

At least 73 records · Page 4

The nature of chemisorbed oxygen on Ni(100) and Cu(100)

Model calculations indicate two low-lying states for the interaction of O with Ni and Cu(100). The oxide state is approximately 1 eV more stable and its R(perpendicular) for Ni(100) is consistent with the experimental value for Ni(100), indicating only one type of stable chemisorption bond. This agrees with XPS (X-ray photoemission spectroscopy) and EXAFS (extended X-ray absorption fine structure) data for the observed LEED (low energy electron diffraction) structures. Interpretations of EELS (electron energy loss spectroscopy) data in terms of a radical state forthe p(2x2) and the oxide state for the c(2x2) structure must be seriously questioned.

Bauschlicher, C. W., Jr.↗

Charging and hybridization in the finite cluster model

Cluster wavefunctions which have appropriate hybridization and polarization lead to reasonable properties for the interaction of an adsorbate with a solid surface. However, for Al clusters, it was found that the atomic change distribution is not uniform. The finite cluster size leads to changes not representative for an extended system. This effect appears to be dependent on the particular materials being studied; it does not occur in all cases.

Bauschlicher, C. W., Jr.↗

On the low-lying states of CuO

Self consistent field and correlated wave functions have been computed for the ground and for several low-lying states of CuO. The ground state is X(2)PI and the lowest excited state, at approximately 8,000/cm above X(2)PI, is a previously unidentified 2-sigma(+) state. The separation of these states is compared to that for the similar states of KO and is analysed in terms of integrals between orbitals of the separated free ions. A classification of the states of the molecule based on states of Cu(+) and O(-) which leads to a division into manifolds of states arising from Cu(+) 3d(10) and Cu(+) 3d(9) 4s(1) is considered. It is predicted that the state of the 3d(9) 4s(1) manifold are 10,000 to 30,000/cm above the ground state and assign the observed A2-sigma(+) state at 16,500/cm to this manifold.

Bagus, P. S.↗

The dissociation of H2 on the Ni(100) surface

The dissociation of H2 on the (100) surface of Ni is investigated using a cluster model. The mechanism for dissocation of H2 directly above a Ni atom has little to no barrier and involves the Ni 3d electrons; elimination of the Ni 3d interaction with the H2 increases the barrier to more than 50 kcal/mol. The dissociation at the bridge site, treated without the Ni 3d interaction, leads to a barrier of about 30 kcal/mol, leading to the conclusion that the dissociation of H2 at any site on a Ni(100) surface requires strong 3d participation. The results are quantitatively different if the Ni 4p orbitals are not included. The effects of cluster size on the results are also discussed.

Siegbahn, P. E. M.↗

Potential energy surfaces of MH2 (M = Co, Fe, and Cu)

In many important catalytic processes, the dissociation of the hydrogen molecule is a fundamental step, and the chemisorption of dihydrogen by metal surfaces has been studied. However, quantitative results from theoretical treatments are not very encouraging. Blomberg and Siegbahn (1983) have found that the negative binding energy for NiH2 obtained with the aid of the commonly used Hartree-Fock approximation differs greatly from the result found on the basis of a more sophisticated calculation, including electron correlation. Another study showed the great importance of d orbitals in the dissociation process. A study, similar to the one on NH2, has been conducted for three other metals, including cobalt, iron, and copper. The present investigation is concerned with the results of this study. The potential surfaces of CoH2, FeH2, and CuH2 are discussed, taking into account the lowest atomic states, the bent low spin complex, the bent high spin saddle points, and the linear states.

Siegbahn, P. E. M.↗

Theoretical electric quadrupole transition probabilities for Ca, Sr and Ba

The 1D-1S quadrupole transition probabilities for Ca, Sr and Ba have been computed using extended GTO and STO valence basis sets and configuration-interaction wavefunctions that include the important core-valence correlation effects. For Ba and Sr, the relativistic contraction of the core orbitals was accounted for in the GTO calculations by a relativistic effective-core potential. The computed Einstein coefficient for Ca of 39.6/s is in excellent agreement with the recent experimental value of 40 + or - 8/s. The best Einstein coefficients for Sr (44.7/s) and Ba (2.98/s) imply increasing quadrupole line strengths down the column. Relativistic effects substantially increase the quadrupole Einstein coefficient for Ba.

Bauschlicher, C. W., Jr.↗

The nature of the metal-CO interaction and bonding

The adsorption of CO on metal surfaces is represented by molecular orbital cluster models of CO at an on top site and adsorbed normal to the surface carbon end down. Ab initio SCF and MCSCF calculations are performed for several clusters. The new constrained space orbital variation CSOV approach is used to analyze the bonding and to compare CO adsorption on Al, representative of sp metals, with that on Cu, representative of transition metals. There is a large repulsion between the superposed free CO and metal charge distributions which is considerably smaller for Cu than for Al because there are fewer valence sigma electrons for Cu than for Al. The CSOV analysis shows that the metal to CO pi donation is much more important than the CO to metal sigma donation. It is also shown that for Cu, the d pi contribution to the metal pi donation is larger than the valence 4p pi contribution. The d pi donation is compared between Fe, Ni, and Cu and this donation and the metal-CO interaction are found to be different in the order Fe greater than Ni greater than Cu.

Bagus, P. S.↗

A new analysis of charge transfer and polarization for ligand-metal bonding - Model studies of Al4CO and Al4NH3

The nature of the bonding of CO and NH3 ligands to Al is analyzed, and the intra-unit charge polarization and inter-unit donation for the interaction of ligands with metals are studied. The consequences of metal-to-ligand and ligand-to-metal charge transfer are separately considered by performing a constrained space orbital variation (CSOV) with the electrons of the metal member of the complex in the field of frozen ligand. The electrons of the metal atoms are then frozen in the relaxed distribution given by the CSOV SCF wave function and the ligand electrons are allowed to relax. Quantitative measures of the importance of inter-unit charge transfers and intra-unit polarization are obtained using results of SCF studies of Al4CO and Al4NH3 clusters chosen to simulate the adsorption of the ligands at an on-top side of the Al(111) surface. The electrostatic attraction of the effective dipole moments of the metal and ligand units makes an important contribution to the bond.

Bagus, P. S.↗

On the dissociation energy of CaOH and LiOH

A technique for computing the dissociation energy of ionic diatomics is extended to the ionic triatomics LiOH and CaOH. The calculated Do values (with the recommended experimental values in parentheses) are 4.72 plus or minus 0.06 eV (4.53 plus or minus 0.04) for LiOH and 4.13 plus or minus 0.07 (4.23 eV) for CaOH.

Bauschlicher, C. W., Jr.↗

On the low-lying states of TiC

The ground and low-lying excited states of TiC are investigated using a CASSCF-externally contracted CI approach. The calculations yield a 3Sigma(+) ground state, but the 1Sigma(+) state is only 780/cm higher and cannot be ruled out. The low-lying states have some triple bond character. The nature of the bonding and origin of the states are discussed.

Bauschlicher, C. W., Jr.↗

Origin of the coverage-dependent vibrational shift for O on Ni(100)

The p(2 x 2) and c(2 x 2) coverages of O on Ni(100) are studied with a cluster model. The p(2 x 2) coverge is modeled by the addition of a single O at a fourfold site. The c(2 x 2) is modeled by the explicit inclusion of four additional O atoms. Consistent with electron-energy-loss spectroscopy results, the O-Ni vibration is 85/cm lower for the c(2 x 2) cluster than for the p(2 x 2). The height of O above the surface is 11 pm smaller for the c(2 x 2) coverage. The nature of the O-to-Ni bonding is similar for both coverages.

Bauschlicher, C. W., Jr.↗

NiNO - A model for NO on a metal surface

Two different mechanisms for the bonding of NO to Ni have been found; the first is for a linear geometry and involves a 3d-pi(asterisk) bond and has a short Ni-N bond length. The second mechanism, the more weakly bound, involves a Ni4s-N2p bond in a bent structure. The relationship of these two stages to NO chemisorbed on metals is discussed. For both mechanisms, there are no open shell electrons on NO, consistent with the fact that multiplet splitting is not definitely observed in the photoemission spectra of adsorbed NO.

Bauschlicher, C. W., Jr.↗

On the electron affinity of Be2

Calculations of the electron affinity (EA) of Be2 using a large Slater-type orbital basis set and extensive correlation based upon a CASSCF reference are reported. The adiabatic EAs are estimated to be 0.44 eV for the 2Sigma sub g(+) state and 0.56 eV for the 2Pi sub u state. The extra electron attaches into an empty bonding orbital, causing a shortening of the bond length and an increase in omega(e). The D(e) of the 2Pi sub u state of Be2 is six times as large as the D(e) of Be2.

Bauschlicher, C. W., Jr.↗

Theoretical study of the dipole moment of oxygen monofluoride (OF)

The ground-state potential curve and dipole-moment function of OF are calculated theoretically using the complete active-space self-consistent-field levels, externally contracted configuration-interaction levels, or multireference (singles plus doubles) configuration-interaction levels. Both an extended Gaussian basis set and a double-zeta-plus-polarization basis set were applied. The results are presented in extensive tables and graphs. Best results are achieved using a large Gaussian basis set and taking the valence-correlation energy into account. It is suggested that OF may best be detected by its laser-magnetic-resonance spectrum in the IR.

Langhoff, S. R.↗

Supplemental basis functions for the second transition row elements

It is noted that for molecular calculations, the basis sets presented by Huzinaga (1977) need to be augmented by (1) 5p functions to describe the 5s - 5p near degeneracy; (2) a diffuse 4d function to provide for a balanced description of the 5s2 4dn, 5s1 4d(n+1), and 4d(n+2) states of the atom; and (3) a set of 4f functions to correlate the 4d functions. Here, the diffuse 4d function is similar in function to the diffuse 3d function for the first transition row elements recommended by Hay (1977). A table is included giving the optimized values for the diffuse 4d, the 5p, and 4f (STO exponent) functions. The diffuse 4d function and the 5p functions are optimized at the SCF level on the basis of the 5s1 4d(n+1) state (except for Pd, which is optimized for the 4d10 state) and the 5s1 5p1 4dn state, respectively. The table also gives the energies and the atomic symmetries for each of the SCF calculations.

Walch, S. P.↗

On the low-lying states of TiN

A series of CAS SCF and multi-reference CI calculations are used to describe the lowest states of TiN. The bonding in all states is described as a triple bond involving the Ti 3d orbitals. The system has some ionic character as seen from both population analysis and dipole moment. The origins of the excited states are discussed.

Bauschlicher, C. W., Jr.↗