Engineering topics

Bauschlicher, Charles W., Jr.

Publications and source records attributed to Bauschlicher, Charles W., Jr..

At least 73 records · Page 4

NASA NTRS1996

Chemical Storage of Data

We investigate the possibility of storing data using H and F on a polymer to signify 0 and 1 bits. We show that the difference between the B-F and B-H interaction energies for either C5H5B or C3H3N2B is only slightly larger than the variation in B-F interaction energy with type of neighboring atoms. Pyridine (C5H5N) and (CH3)3P=O have a much larger difference in the H and F interaction energies. (CH3)3P=O may be better suited as a surface probe, because the interaction with neighboring data sites should be smaller.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1996

On the Reaction of FNO2 with CH3, t-butyl, and C13H21

Theoretical studies are reported for the reaction of FN02 with the radicals CH3, t-butyl, and C13H21, which are templates for the radical site of a hydrogenated diamond surface. All structures axe fully optimized using density functional theory (DFT) based on the B3LYP functional. Calibration calculations axe performed for CH3 + FNO2 using the coupled cluster approach, the the internally contracted multireference configuration. interaction method, and second order perturbation theory based upon complete active space SCF (CASSCF) reference wave function. These calibration calculations support the B3LYP approach for the calculation of bond energies, but show the B3LYP barrier is too low. Combining the calibration calculations with the larger clusters yields our best estimate of a barrier of about 10 kcal/mol. for the reaction of FNO2 with a radical site on hydrogenated diamond.

Thuemmel, H. T.↗

NASA NTRS1996

Chemistry by Way of Density Functional Theory

In this work we demonstrate that density functional theory (DFT) methods make an important contribution to understanding chemical systems and are an important additional method for the computational chemist. We report calibration calculations obtained with different functionals for the 55 G2 molecules to justify our selection of the B3LYP functional. We show that accurate geometries and vibrational frequencies obtained at the B3LYP level can be combined with traditional methods to simplify the calculation of accurate heats of formation. We illustrate the application of the B3LYP approach to a variety of chemical problems from the vibrational frequencies of polycyclic aromatic hydrocarbons to transition metal systems. We show that the B3LYP method typically performs better than the MP2 method at a significantly lower computational cost. Thus the B3LYP method allows us to extend our studies to much larger systems while maintaining a high degree of accuracy. We show that for transition metal systems, the B3LYP bond energies are typically of sufficient accuracy that they can be used to explain experimental trends and even differentiate between different experimental values. We show that for boron clusters the B3LYP energetics are not as good as for many of the other systems presented, but even in this case the B3LYP approach is able to help understand the experimental trends.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1996

Infrared Spectra of Perdeuterated Naphthalene, Phenanthrene, Chrysene, and Pyrene

Calculations are carried out using density functional theory (DFT) to determine the harmonic frequencies and intensities of perdeuterated naphthalene, phenanthrene, pyrene, and chrysene. We also report matrix- isolation spectra for these four species. The theoretical and experimental frequencies and relative intensities for the perdeuterated species are in generally good agreement. The effect of perdeuteration is to reduce the sum of the integrated intensities by a factor of about 1.75. This reduction occurs for all vibrational motions, except for the weak low frequency ring deformation modes. There is also a significant redistribution of the relative intensities between the out-of-plane C-D bands relative to those found for the out-of-plane C-H bands. The theoretical isotopic ratios provide an excellent diagnostic of the degree of C-H(C-D) involvement in the vibrational bands, allowing in most cases a clear distinction of the type of motion.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1996

Displacement Energies for Nanorods

The geometries have been optimized and harmonic frequencies computed for three small hydrocarbon rods. The two lowest unique frequencies correspond to a torsion and a bend of the rods. The energy to bend or twist the rods has been computed by adding a fraction of the normal coordinate corresponding to these two modes to the equilibrium geometry. The density functional theory (using B3LYP) and self-consistent field (SCF) results are very similar for all properties considered.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1996

The Successive OH Binding Energies of Sc(OH)n+ for n=1-3

The geometries of Sc(OH)n+, for n = 1-3, have been optimized using density functional theory, in conjunction with the B3LYP hybrid functional. The zero-point energies are computed at the same level of theory. The successive OH bond energies have been computed at the CCSD(T) level for ScOH+ and Sc(OH)2+. The computed result for ScOD+ is in excellent agreement with the recent experiment of Armentrout and co-workers. There is a dramatic drop for the third OH, because Sc+ has only two valence electrons and therefore the bonding changes when the third OH is added. The difference between the B3LYP and CCSD(T) OH binding energies for the first two OH groups is discussed.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1996

The Calculation of Accurate Harmonic Frequencies of Large Molecules: The Polycyclic Aromatic Hydrocarbons, a Case Study

The vibrational frequencies and infrared intensities of naphthalene neutral and cation are studied at the self-consistent-field (SCF), second-order Moller-Plesset (MP2), and density functional theory (DFT) levels using a variety of one-particle basis sets. Very accurate frequencies can be obtained at the DFT level in conjunction with large basis sets if they are scaled with two factors, one for the C-H stretches and a second for all other modes. We also find remarkably good agreement at the B3LYP/4-31G level using only one scale factor. Unlike the neutral PAHs where all methods do reasonably well for the intensities, only the DFT results are accurate for the PAH cations. The failure of the SCF and MP2 methods is caused by symmetry breaking and an inability to describe charge delocalization. We present several interesting cases of symmetry breaking in this study. An assessment is made as to whether an ensemble of PAH neutrals or cations could account for the unidentified infrared bands observed in many astronomical sources.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1996

The Application of DFT to Systems Containing Metal Atoms

The application of density functional theory (DFT) to a series of metal containing systems will be described. The focus will be on the calculation of accurate bond energies, especially metal-ligand successive bond energies. The DFT results will be compared with experiment and other levels of theory. If time permits, metal clusters will also be discussed.

Ricca, Alessandra↗

NASA NTRS1995

Structure of V(H2)n(+) Clusters for n = 1-6

Geometries, vibrational frequencies, spin states, H2 binding energies, and Delta(S) values have been determined for V(H2)n(+), for n = 1-6, using the B3LYP hybrid functional. The binding energies and Delta(S) values are in good agreement with experiment, thus showing that the B3LYP functional offers a reliable approach for optimizing the geometry and determining the H2 binding energies for this system. The calculations show that the increase in the binding energy and entropy associated with the addition of the sixth H2 to V(+) is due to a change in spin state from quintet for the smaller clusters to triplet for V(H2)6(+). The results for V(H2)n(+) are compared with those for CO(H2)n(+).

Maitre, Philippe↗

NASA NTRS1995

Structure of Co(H2)n + Clusters, for n = 1-6

The geometries and H2 binding energies have been determined for Co(H2)n (sup +), for n = 1-6. The binding energies are in good agreement with experiment. The shape of the clusters is used to explain the pairwise decrease in the binding energies. The bonding in CoH2 (sup +) and Co(H2)2 (sup +) is very similar and is enhanced by sd (sigma) hybridization. The next two H2 molecules add to the side of Co(H2)2 (sup +). These two additional H2 molecules cannot benefit from sd (sigma) hybridization and are less strongly bound. The addition of the fifth and sixth H2 molecules eliminates sd (sigma) hybridization as a mechanism for reducing Co-H2 repulsion. This coupled with the smaller Co to H2 (sigma *) donation results in another decrease in the binding energies.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1995

The Study of the Successive Metal-Ligand Binding Energies for Fe(sup +), Fe(sup -), V(sup +) and Co(sup +)

The successive binding energies of CO and H2O to Fe(sup +), CO to Fe(sup -), and H2 to Co(sup +) and V(sup +) are presented. Overall the computed results are in good agreement with experiment. The trends in binding energies are analyzed in terms of metal to ligand donation, ligand to metal donation, ligand-ligand repulsion, and changes in the metal atom, such as hybridization, promotion, and spin multiplicity. The geometry and vibrational frequencies are also shown to be directly affected by these effects.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1995

The Low-Lying Electronic States of LiB

The spectroscopic constants for the triplet and singlet states of LiB below about 30 000/ cm are determined using an internally contracted multireference configuration interaction approach in conjunction with [6s 5p 3d 2f] atomic natural orbital basis sets. The ground state is (sup 3)Pi as found in previous work. No excited triplet states are found to be ideal for characterizing the ground state; the (1)(sup 3)Sigma(sup -) state has a transition energy that is too small for many experimental approaches and the (2)(sup 3)Pi and (3)(sup 3)Pi states have bond lengths that are significantly longer than the ground state, resulting in transition intensities that are spread out over many vibrational levels of the ground state.

Ricca, Alessandra↗

NASA NTRS1995

A Study of the X(sup 2) Sigma(sup +) and A(sup 2) Pi States of MgAr(sup +) and MgKr(sup +)

The ground (sup 2)Sigma(sup +) and lowest excited (sup 2)Pi states of MgAr(sup +) and MgKr(sup +) are studied using the singles and doubles configuration interaction (SDCI) approach, in conjunction with large basis sets. The effect of Mg core correlation and core polarization are accounted for using the core-polarization potential (CPP) approach. Franck-Condon factors, oscillator strengths, radiative lifetimes, dissociation energies, bond lengths, and excitation energies are reported. The computed results are in good agreement with the available experimental data.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1995

The G2(B3LYP/MP2/CC) Approach: A Modification of the G2(MP2) Approach and a Comparison with B3LYP Results

The quadratic configuration interaction calculation in the G2(MP2) approach is replaced by a coupled-cluster singles and doubles calculation including a perturbational estimate of the triples excitations. In addition, the SCF and MP2 geometry optimizations and SCF frequency calculation in the G2(MP2) approach are replaced by a B3LYP geometry optimization and frequency calculation in the proposed G2(B3LYP/MP2/CC) approach. This simplification does not affect the average absolute deviation from experiment, but decreases the maximum error compared with the G2(MP2) approach. The G2(B3LYP/MP2/CC) results are compared with those obtained using the B3LYP approach, and the G2(B3LYP/MP2/CC) model is found to be more reliable, even if the B3LYP calculations are performed using a large basis set.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1995

The Sensitivity of B3LYP Atomization Energies to the Basis Set and a Comparison of the Basis Set Requirements for CCSD(T) and B3LYP

The atomization energies of the 55 G2 molecules are computed using the B3LYP approach with a variety of basis sets. The 6-311 + G(3df) basis set is found to yield superior results to those obtained using the augmented - correlation - consistent valence-polarized triple-zeta set. The atomization energy of SO2 is found to be the most sensitive to basis set and is studied in detail. Including tight d functions is found to be important for obtaining good atomization energies. The results for SO2 are compared with those obtained using the coupled-cluster singles and doubles approach including a perturbational estimate of the triple excitations.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1995

The Low-Lying Electronic States of YCu

The spectroscopic constants for the singlet and triplet states of YCu below about 15 000 per centimeter are determined using an internally contracted multireference configuration-interaction approach. These calculations are calibrated by studies of fewer states using higher levels of correlation treatment and/or larger basis sets. The computed T(sub e) values and radiative lifetimes are in reasonable agreement with experiment. The calculations confirm the previous experimental assignment for all but one state, where theory helps resolve between two possible assignments.

Ricca, Alessandra↗

NASA NTRS1995

Using Density Functional Theory (DFT) for the Calculation of Atomization Energies

The calculation of atomization energies using density functional theory (DFT), using the B3LYP hybrid functional, is reported. The sensitivity of the atomization energy to basis set is studied and compared with the coupled cluster singles and doubles approach with a perturbational estimate of the triples (CCSD(T)). Merging the B3LYP results with the G2(MP2) approach is also considered. It is found that replacing the geometry optimization and calculation of the zero-point energy by the analogous quantities computed using the B3LYP approach reduces the maximum error in the G2(MP2) approach. In addition to the 55 G2 atomization energies, some results for transition metal containing systems will also be presented.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1995

The Structure and Stability of Bn(+) Clusters

The geometries of B+n clusters for n less than 14 have been optimized using density functional theory with the B3LYP functional. The most stable structure for each cluster is planar or quasi-planar. The B3LYP fragmentation energies are calibrated using coupled cluster theory. Overall, our corrected fragmentation energies are in reasonable agreement with experiment. Our results are compared with previous theoretical results.

Ricca, Alessandra↗