Search NASA⌕ Search

Engineering topics

Bazak, J. David

Publications and source records attributed to Bazak, J. David.

In situ characterization of metastable Pb3O5 and Pb2O3 phases during thermal decomposition of PbO2 to PbO

Nonstoichiometric lead oxides play a key role in the formation and cycling of the positive electrodes in a lead acid battery. These phases have been linked to the underutilization of the positive active material but also play a key role in the battery’s cycle life, providing inter-particle adhesion and the connection to the underlying lead grid. Similar phases have previously been identified by mass loss or color change during thermal annealing of PbO2 to PbO, suggesting that at least two intermediate PbOx phases exist. Using multiple in situ analysis techniques (powder diffraction, x-ray absorption, x-ray photoelectron spectroscopy) and ex situ nuclear magnetic resonance measurements, the structural conversion and changes in the lead oxidation states were identified during this process. Isolation of the PbOx phases enabled confirmation of Pb3O5 and Pb2O3 by diffraction and the first 207Pb NMR measurement of these intermediates.

Kinnibrugh, Tiffany L.↗

Anionic Effects on Concentrated Aqueous Lithium Ion Dynamics

In this article, the structural dynamics, chemical reactivity, anisotropy, diffusivity, viscosity, and density were measured for concentrated lithium salt solutions, including lithium chloride (LiCl), lithium bromide (LiBr), lithium nitrite (LiNO 2 ), and lithium nitrate (LiNO 3 ), with methyl thiocyanate as an infrared vibrational probe molecule, using two-dimensional infrared spectroscopy (2D IR), nuclear magnetic resonance (NMR) spectroscopy, and viscometry. 2D IR, NMR, and viscosity results show that LiNO 2 exhibits longer correlation times, lower diffusivity, and nearly four times greater viscosity when compared to the other lithium salt solutions of the same concentration, suggesting that nitrite anions may strongly facilitate structure formation via strengthening water-ion interactions, directly impacting bulk solution properties at sufficiently high concentrations. Additionally, the LiNO 2 and LiNO 3 solutions show significantly reduced chemical reactivity with respect to lithium cations coordinating with the methyl thiocyanate when compared to the lithium halide salts.

2D IR↗

From Bulk to Interface: Solvent Exchange Dynamics and Their Role in Ion Transport and the Interfacial Model of Rechargeable Magnesium Batteries

Multivalent battery chemistries have been explored in response to the increasing demand for high-energy rechargeable batteries utilizing sustainable resources. Solvation structures of working cations have been recognized as a key component in the design of electrolytes; however, most structure–property correlations of metal ions in organic electrolytes usually build upon favorable static solvation structures, often overlooking solvent exchange dynamics. We here report the ion solvation structures and solvent exchange rates of magnesium electrolytes in various solvents by using multimodal nuclear magnetic resonance (NMR) analysis and molecular dynamics/density functional theory (MD/DFT) calculations. These magnesium solvation structures and solvent exchange dynamics are correlated to the combined effects of several physicochemical properties of the solvents. Moreover, Mg 2+ transport and interfacial charge transfer efficiency are found to be closely correlated to the solvent exchange rate in the binary electrolytes where the solvent exchange is tunable by the fraction of diluent solvents. Our primary findings are (1) most battery-related solvents undergo ultraslow solvent exchange coordinating to Mg 2+ (with time scales ranging from 0.5 μs to 5 ms), (2) the cation transport mechanism is a mixture of vehicular and structural diffusion even at the ultraslow exchange limit (with faster solvent exchange leading to faster cation transport), and (3) an interfacial model wherein organic-rich regions facilitate desolvation and inorganic regions promote Mg 2+ transport is consistent with our NMR, electrochemistry, and cryogenic X-ray photoelectron spectroscopy (cryo-XPS) results. In conclusion, this observed ultraslow solvent exchange and its importance for ion transport and interfacial properties necessitate the judicious selection of solvents and informed design of electrolyte blends for multivalent electrolytes.

25 ENERGY STORAGE↗

Stable Cycling of Mg Metal Anodes by Regulating the Reactivity of Mg 2+ Solvation Species

Rationally designing stable nonaqueous electrolytes for Mg metal anodes demands a thorough understanding of their interfacial behaviors. Here, the critical role of cation–anion pairing in improving the cathodic stabilities of amine-based electrolytes against solvent reduction and H 2 evolution is identified. It is demonstrated that strong coordination between solvating amine groups and the Mg 2+ cation facilitates the dehydrogenation of the -NH 2 group, which is mainly responsible for low reversibility during Mg metal plating and stripping. Introducing ion-pairing into the primary solvation shell can effectively weaken the amine coordination such that its reduction is suppressed. A novel interfacial behavior regarding parasitic reaction product dissolution is also identified, which is responsible for the failure of interfacial passivation. An ion-pairing electrolyte is developed based on a weakly-solvated amine molecule and strongly coordinating Mg 2+ salt. This electrolyte composition delivers long-term Mg metal anode cycling with 99.6% Coulombic efficiency for 800 cycles.

25 ENERGY STORAGE↗

Ion Solvation-Driven Liquid–Liquid Phase Separation in Divalent Electrolytes with Miscible Organic Solvents

Liquid–liquid phase separation (LLPS) is a common phenomenon, but LLPS of electrolytes prepared in miscible organic solvents is rarely documented. Here we report four cases of LLPS that occur in MgTFSI 2 or ZnTFSI 2 electrolytes in mixed organic solvents. The conditions for the formation of this LLPS share four common features: cations with high charge density; bulky anions with low charge density; a strongly coordinating solvent with high compressibility; and a relatively weak coordinating solvent with low relative permittivity and high mobility. With these conditions, the cations tend to draw the strongly coordinating solvents together to form a densely-packed, energetically-favorable ion solvation region, while the cosolvents with low relative permittivity tend to repel ions to form an ion-depleted dilute phase. Furthermore, in the dilute upper layer with more than 300 solvent molecules per cation, ion pairs and large ion aggregates are clearly evidenced, due to the incomplete screening of electrostatic interactions by the weaker cosolvent. This LLPS driven by ion solvation may be more common in multivalent electrolytes and is a design consideration with mixed solvents that should not be overlooked.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A New Sodium Thioborate Fast Ion Conductor: Na 3 B 5 S 9

Abstract We report a new sodium fast‐ion conductor, Na 3 B 5 S 9 , that exhibits a high Na ion total conductivity of 0.80 mS cm −1 (sintered pellet; cold‐pressed pellet=0.21 mS cm −1 ). The structure consists of corner‐sharing B 10 S 20 supertetrahedral clusters, which create a framework that supports 3D Na ion diffusion channels. The Na ions are well‐distributed in the channels and form a disordered sublattice spanning five Na crystallographic sites. The combination of structural elucidation via single crystal X‐ray diffraction and powder synchrotron X‐ray diffraction at variable temperatures, solid‐state nuclear magnetic resonance spectra and ab initio molecular dynamics simulations reveal high Na‐ion mobility (predicted conductivity: 0.96 mS cm −1 ) and the nature of the 3D diffusion pathways. Notably, the Na ion sublattice orders at low temperatures, resulting in isolated Na polyhedra and thus much lower ionic conductivity. This highlights the importance of a disordered Na ion sublattice—and existence of well‐connected Na ion migration pathways formed via face‐sharing polyhedra—in dictating Na ion diffusion.

Zhou, Laidong↗

A New Sodium Thioborate Fast Ion Conductor: Na 3 B 5 S 9

Abstract We report a new sodium fast‐ion conductor, Na 3 B 5 S 9 , that exhibits a high Na ion total conductivity of 0.80 mS cm −1 (sintered pellet; cold‐pressed pellet=0.21 mS cm −1 ). The structure consists of corner‐sharing B 10 S 20 supertetrahedral clusters, which create a framework that supports 3D Na ion diffusion channels. The Na ions are well‐distributed in the channels and form a disordered sublattice spanning five Na crystallographic sites. The combination of structural elucidation via single crystal X‐ray diffraction and powder synchrotron X‐ray diffraction at variable temperatures, solid‐state nuclear magnetic resonance spectra and ab initio molecular dynamics simulations reveal high Na‐ion mobility (predicted conductivity: 0.96 mS cm −1 ) and the nature of the 3D diffusion pathways. Notably, the Na ion sublattice orders at low temperatures, resulting in isolated Na polyhedra and thus much lower ionic conductivity. This highlights the importance of a disordered Na ion sublattice—and existence of well‐connected Na ion migration pathways formed via face‐sharing polyhedra—in dictating Na ion diffusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing CO 2 Transport Across a PEEK‐Ionene Membrane and Water‐Lean Solvent Interface

Abstract Efficient direct air capture (DAC) of CO 2 will require strategies to deal with the relatively low concentration in the atmosphere. One such strategy is to employ the combination of a CO 2 ‐selective membrane coupled with a CO 2 capture solvent acting as a draw solution. Here, the interactions between a leading water‐lean carbon‐capture solvent, a polyether ether ketone (PEEK)‐ionene membrane, CO 2 , and combinations were probed using advanced NMR techniques coupled with advanced simulations. We identify the speciation and dynamics of the solvent, membrane, and CO 2 , presenting spectroscopic evidence of CO 2 diffusion through benzylic regions within the PEEK‐ionene membrane, not spaces in the ionic lattice as expected. Our results demonstrate that water‐lean capture solvents provide a thermodynamic and kinetic funnel to draw CO 2 from the air through the membrane and into the bulk solvent, thus enhancing the performance of the membrane. The reaction between the carbon‐capture solvent and CO 2 produces carbamic acid, disrupting interactions between the imidazolium (Im + ) cations and the bistriflimide anions within the PEEK‐ionene membrane, thereby creating structural changes through which CO 2 can diffuse more readily. Consequently, this restructuring results in CO 2 diffusion at the interface that is faster than CO 2 diffusion in the bulk carbon‐capture solvent.

Walter, Eric D.↗

Halide Substitution Effects on Lithium-Ion Diffusion in Protonated Antiperovskites

Solid-state electrolytes (SSEs) for all-solid-state lithium-ion batteries are generating intense interest because these batteries can improve the safety and performance compared with devices fabricated with conventional, flammable liquid electrolytes. In these SSEs, it has been suggested that Li + ion diffusion in the grain boundaries is hindered and is a critical determinant of the overall ionic conductivity (σ). However, Li + ion diffusivities in the grain (D G ) and the grain boundary (D GB ) are difficult to determine experimentally, with few techniques capable of distinguishing the individual contributions. Here, we distinguished the D G and D GB for the protonated lithium antiperovskites (pLiAPs) SSEs: Li 2 OHCl, Li 2 OHBr, Li 2 OHF 0.1 Cl 0.9 , Li 2 OHF 0.1 Br 0.9 , and Li 2 OHCl 0.3 7Br 0.63 . The measurements were obtained directly from 7 Li pulsed-field gradient nuclear magnetic resonance (PFG-NMR) at 353 K. The 7 Li PFG-NMR echo profiles were composed of two primary components with additional secondary oscillatory components – the so-called NMR diffraction phenomenon. The length scale separating the two main components corresponds to a diffusion length of ~1.7 µm, which is thought to be the average grain size (by diameter). The short-range (≤ 1.7 µm) diffusion component associated with D G (≈10 -11 m 2 /s) varied minimally with halide substitution, while the long-range (≥ 1.7 µm) component D GB (≈10 -12 to 10 -15 m 2 /s) was highly sensitive to the substitution of halides and closely correlated with s. In addition, from the comparison of the ratio D GB /D G to D t (the Li + ion diffusion coefficient estimated from the rotational correlation time, t c ), it was determined that the contribution of D G to σ is negligible; 0.01 ~ 0.04 in the pLiAPs studied here. Finally, these insights provide fundamental understanding of the halide substitution effects on Li + ion grain versus grain boundary diffusion, and suggest that careful engineering of the grain boundaries at the microscopic level is necessary to achieve high-performance pLiAP SSEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methyl-Driven Overhauser Dynamic Nuclear Polarization

The Overhauser effect is unique among DNP mechanisms in that it requires the modulation of the electron-nuclear hyperfine interactions. While it dominates DNP in liquids and metals, where unpaired electrons are highly mobile, Overhauser DNP is possible in insulating solids if rapid structural modulations are linked to a modulation in hyperfine coupling. In this study, we report that Overhauser DNP can be triggered by the strategic addition of a methyl group, demonstrated here in a Blatter’s radical. The rotation of the methyl group leads to a modulation of the hyperfine coupling to its protons, which in turn facilitates electron-nuclear cross-relaxation. Removal of the methyl protons, through deuteration, quenches the process, as does the reduction of the hyperfine coupling strength. This result suggests the possibility for the design of tailor-made Overhauser DNP polarizing agents for high-field MAS-DNP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗