Search NASA⌕ Search

Engineering topics

Beatty, J.

Publications and source records attributed to Beatty, J..

Macroscopic approach to the radar echo scatter from high-energy particle cascades

To probe the cosmic particle flux at the highest energies, large volumes of dense material like ice have to be monitored. This can be achieved by exploiting the radio signal. In this work, we provide a macroscopic model to predict the radar echo signatures found when a radio signal is reflected from a cosmic-ray or neutrino-induced particle cascade propagating in a dense medium like ice. Its macroscopic nature allows for an energy independent run-time, taking less than 10 s for simulating a single scatter event. As a first application, we discuss basic signal properties and simulate the expected signal for the T-576 beam-test experiment at the Stanford Linear Accelerator Center. Finally, we find good signal strength agreement with the only observed radar echo from a high-energy particle cascade to date.

79 ASTRONOMY AND ASTROPHYSICS↗

A Catalog of the Highest-energy Cosmic Rays Recorded during Phase I of Operation of the Pierre Auger Observatory

A catalog containing details of the highest-energy cosmic rays recorded through the detection of extensive air showers at the Pierre Auger Observatory is presented with the aim of opening the data to detailed examination. Descriptions of the 100 showers created by the highest-energy particles recorded between 2004 January 1 and 2020 December 31 are given for cosmic rays that have energies in the range 78–166 EeV. Details are also given on a further nine very energetic events that have been used in the calibration procedure adopted to determine the energy of each primary. A sky plot of the arrival directions of the most energetic particles is shown. No interpretations of the data are offered.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Radar Echo Telescope for Cosmic Rays: Pathfinder experiment for a next-generation neutrino observatory

The Radar Echo Telescope for Cosmic Rays (RET-CR) is a recently funded experiment designed to detect the englacial cascade of a cosmic ray-initiated air shower via in-ice radar, toward the goal of a full-scale, next-generation experiment to detect ultrahigh energy neutrinos in polar ice. For cosmic rays with a primary energy greater than 10 PeV, roughly 10% of an air shower’s energy reaches the surface of a high elevation ice sheet (≳2 ˙km) concentrated into a radius of roughly 10 cm. This penetrating shower core creates an in-ice cascade orders of magnitude more dense than the preceding in-air cascade. Additionally, this dense cascade can be detected via the radar echo technique, where transmitted radio waves are reflected from the ionization deposit left in the wake of the cascade. RET-CR will test the radar echo method in nature, with the in-ice cascade of a cosmic ray-initiated air shower serving as a test beam. In this work, we present the projected event rate and sensitivity based upon a three part simulation using corsika, geant4, and radioscatter. RET-CR expects ~1 radar echo event per day.

79 ASTRONOMY AND ASTROPHYSICS↗

Observation of Radar Echoes from High-Energy Particle Cascades

We report here the observation of radar echoes from the ionization trails of high-energy particle cascades. Data were taken at the SLAC National Accelerator Laboratory, where the full electron beam ( ~ 10 9 e - at ~ 10 GeV / e - ) was directed into a plastic target to simulate an ultrahigh-energy neutrino interaction. The target was interrogated with radio waves, and coherent radio reflections from the cascades were detected with properties consistent with theoretical expectations. This is the first definitive observation of radar echoes from high-energy particle cascades, which could lead to a viable neutrino detection technology for energies ≳ 10 16 eV .

43 PARTICLE ACCELERATORS↗

Antarctic Impulsive Transient Antenna (ANITA) instrumentation

We will report on the details of the ANITA instrument. This instrument is fundamentally a broadband antenna, which is arrayed and constructed in such a way as to be optimized for the detection and characterization of high-energy neutrino cascades.

ANITA↗

Overview of the ANITA project

The ANITA project is designed to investigate ultra-high energy (>10^17 eV) cosmic ray interactions throughout the universe by detecting the neutrinos created in those interactions. These high energy neutrinos are detectable through their interactions within the Antarctic ice sheet, which ANITA will use as a detector target that effectively converts the neutrino interactions to radio pulses. This paper will give an overview of the project including scientific objectives, detection description and mission design.

ANITA↗

An advanced arc track resistant airframe wire

Tensolite, a custom cable manufacturer specializing in high temperature materials as the dielectric medium, develops an advance arc track resistant airframe wire called Tufflite 2000. Tufflite 2000 has the following advantages over the other traditional wires: lighter weight and smaller in diameter; excellent wet and dry arc track resistance; superior dynamic cut-through performance even at elevated temperatures; flight proven performance on Boeing 737 and 757 airplanes; and true 260 C performance by utilizing Nickel plated copper conductors. This paper reports the different tests performed on Tufflite 2000: accelerated aging, arc resistance (wet and dry), dynamic cut through, humidity resistance, wire-to-wire abrasion, flammability, smoke, weight, notch sensitivity, flexibility, and markability. It particularly focuses on the BSI (British Standards Institute) dry arc resistance test and BSI wet arc tracking.

Beatty, J.↗

Using dimethylether as a drift gas in a high precision drift tube detector

Excellent spatial resolution (34 microns) has been obtained using dimethylether, (CH3)2O at 1 atm in a small drift tube detector. This is better by at least a factor of 2 compared to previous work (about 80 microns) with a conventional gas (a 50-50 argon-ethane mixture) in the same detector. The Lorentz angle and the gas amplification have been measured over a wide range of electric and magnetic fields.

Zhou, B.↗

Pupillometric measurement of operator workload

Pupillometry as a method of measuring workload is described. Pupillometric measures provide an indication of momentary fluctuations in central nervous system excitability that occur as cognitive operations are performed; the magnitude of these changes may serve as a sensitive indicator of the workload imposed by cognitive tasks.

Beatty, J.↗

Physiological assessment of operator workload during manual tracking. 1: Pupillary responses

The feasibility of pupillometry as an indicator for assessing operator workload during manual tracking was studied. The mean and maximum pupillary responses of 12 subjects performing tracking tasks with three levels of difficulty (bandwidth of the forcing function were 0.15, 0.30 and 0.50 Hz respectively) were analysed. The results showed that pupillary dilation increased significantly as a function of the tracking difficulty which was reflected by the significant increase of tracking error (RMS). The present study supplies additional evidence that pupillary response is a sensitive and reliable index which may serve as an indicator for assessing operator workload in man-machine systems.

Jiang, Q.↗