Search NASA⌕ Search

Engineering topics

Beckham, Gregg T.

Publications and source records attributed to Beckham, Gregg T..

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Natural diversity screening, assay development, and characterization of nylon-6 enzymatic depolymerization

Successes in biocatalytic polyester recycling have raised the possibility of deconstructing alternative polymers enzymatically, with polyamide (PA) being a logical target due to the array of amide-cleaving enzymes present in nature. Here, we screen 40 potential natural and engineered nylon-hydrolyzing enzymes (nylonases), using mass spectrometry to quantify eight compounds resulting from enzymatic nylon-6 (PA6) hydrolysis. Comparative time-course reactions incubated at 40-70 °C showcase enzyme-dependent variations in product distributions and extent of PA6 film depolymerization, with significant nylon deconstruction activity appearing rare. The most active nylonase, a NylC K variant we rationally thermostabilized (an N-terminal nucleophile (Ntn) hydrolase, NylC K -TS, T m = 87.4 °C, 16.4 °C higher than the wild-type), hydrolyzes 0.67 wt% of a PA6 film. Reactions fail to restart after fresh enzyme addition, indicating that substrate-based limitations, such as restricted enzyme access to hydrolysable bonds, prohibit more extensive deconstruction. Overall, this study expands our understanding of nylonase activity distribution, indicates that Ntn hydrolases may have the greatest potential for further development, and identifies key targets for progressing PA6 enzymatic depolymerization, including improving enzyme activity, product selectivity, and enhancing polymer accessibility.

09 BIOMASS FUELS↗
DOE OSTI2023

Synthesis, characterization, and recycling of bio-derivable polyester covalently adaptable networks for industrial composite applications

Fiber-reinforced polymers (FRPs) are critical for energy-relevant applications such as wind turbine blades. Despite this, the end-of-life options for FRPs are limited as they are permanently cross-linked thermosets. To enable the circularity of FRPs, we formulated a bio-derivable polyester covalently adaptable network (PECAN), sometimes referred to as a polyester vitrimer, to manufacture FRPs at >1 kg scale, which is accomplished as the resin is infusible (175-425 cP at 25 °C viscosity), can be cured at 80 °C within 5 h and is depolymerizable via methanolysis yielding high-quality fibers and recoverable hardener. The FRPs exhibit a transverse tensile modulus comparable with today's wind relevant FRPs (10.4-11.9 GPa). Modeling estimates a resin minimum selling price of $2.28/kg and, relative to an epoxy-amine resin, PECAN manufacture requires 19%-21% less supply chain energy and emits 33%-35% less greenhouse gas emissions. Overall, this study suggests that redesigned thermosets can yield beneficial circularity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Comparison of wild-type KT2440 and genome-reduced EM42 Pseudomonas putida strains for muconate production from aromatic compounds and glucose

Pseudomonas putida KT2440 is a robust, aromatic catabolic bacterium that has been widely engineered to convert bio-based and waste-based feedstocks to target products. Towards industrial domestication of P. putida KT2440, rational genome reduction has been previously conducted, resulting in P. putida strain EM42, which exhibited characteristics that could be advantageous for production strains. Here, we compared P. putida KT2440-and EM42-derived strains for cis,cis-muconic acid production from an aromatic compound, p-coumarate, and in separate strains, from glucose. To our surprise, the EM42-derived strains did not outperform the KT2440-derived strains in muconate production from either substrate. In bioreactor cultivations, KT2440-and EM42-derived strains produced muconate from p-coumarate at titers of 45 g/L and 37 g/L, respectively, and from glucose at 20 g/L and 13 g/L, respectively. To provide additional insights about the differences in the parent strains, we analyzed growth profiles of KT2440 and EM42 on aromatic compounds as the sole carbon and energy sources. In general, the EM42 strain exhibited reduced growth rates but shorter growth lags than KT2440. We also observed that EM42-derived strains resulted in higher growth rates on glucose compared to KT2440-derived strains, but only at the lowest glucose concentrations tested. Transcriptomics revealed that genome reduction in EM42 had global effects on transcript levels and showed that the EM42-derived strains that produce muconate from glucose exhibit reduced modulation of gene expression in response to changes in glucose concentrations. Overall, our results highlight that additional studies are warranted to understand the effects of genome reduction on microbial metabolism and physiology, especially when intended for use in production strains.

09 BIOMASS FUELS↗
DOE OSTI2023

Elastomeric vitrimers from designer polyhydroxyalkanoates with recyclability and biodegradability

Cross-linked elastomers are stretchable materials that typically are not recyclable or biodegradable. Medium-chain-length polyhydroxyalkanoates (mcl-PHAs) are soft and ductile, making these bio-based polymers good candidates for biodegradable elastomers. Elasticity is commonly imparted by a cross-linked network structure, and covalent adaptable networks have emerged as a solution to prepare recyclable thermosets via triggered rearrangement of dynamic covalent bonds. Here, we develop biodegradable and recyclable elastomers by chemically installing the covalent adaptable network within biologically produced mcl-PHAs. Specifically, an engineered strain of Pseudomonas putida was used to produce mcl-PHAs containing pendent terminal alkenes as chemical handles for postfunctionalization. Thiol-ene chemistry was used to incorporate boronic ester (BE) cross-links, resulting in PHA-based vitrimers. mcl-PHAs cross-linked with BE at low density (<6 mole %) affords a soft, elastomeric material that demonstrates thermal reprocessability, biodegradability, and denetworking at end of life. The mechanical properties show potential for applications including adhesives and soft, biodegradable robotics and electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Lignin conversion to β-ketoadipic acid by Pseudomonas putida via metabolic engineering and bioprocess development

Bioconversion of a heterogeneous mixture of lignin-related aromatic compounds (LRCs) to a single product via microbial biocatalysts is a promising approach to valorize lignin. Here, Pseudomonas putida KT2440 was engineered to convert mixed p-coumaroyl– and coniferyl-type LRCs to β-ketoadipic acid, a precursor for performance-advantaged polymers. Expression of enzymes mediating aromatic O-demethylation, hydroxylation, and ring-opening steps was tuned, and a global regulator was deleted. β-ketoadipate titers of 44.5 and 25 grams per liter and productivities of 1.15 and 0.66 grams per liter per hour were achieved from model LRCs and corn stover-derived LRCs, respectively, the latter representing an overall yield of 0.10 grams per gram corn stover-derived lignin. Technoeconomic analysis of the bioprocess and downstream processing predicted a β-ketoadipate minimum selling price of $\$2.01$ per kilogram, which is cost competitive with fossil carbon-derived adipic acid ($\$1.10$ to 1.80 per kilogram). Overall, this work achieved bioproduction metrics with economic relevance for conversion of lignin-derived streams into a performance-advantaged bioproduct.

09 BIOMASS FUELS↗
DOE OSTI2023

Effect of Ligand Chemistry on the Electronic Properties and Reactivity of Cobalt Acetate Autoxidation Catalysts

Autoxidation chemistry catalyzed by cobalt(II) acetate is an industrial pathway for converting hydrocarbons into oxygenated compounds and has promising potential applications in plastic waste deconstruction. However, the chemical properties of the Co acetate-based catalysts and their roles in the reaction mechanism are poorly understood, and as a result, attempts to redesign the autoxidation chemical process for novel applications lack clear direction. In this work, we investigate the structure and electronic properties of a series of multinuclear Co(III) compounds that have been proposed as active participants in catalytic autoxidation. Through a combination of X-ray spectroscopic measurements [Co K-edge X-ray absorption spectroscopy (XAS), extended X-ray absorption fine structure (EXAFS), Kβ X-ray emission spectroscopy (XES), and high-energy resolution fluorescence detection (HERFD) XAS] and theoretical methods, we characterize the interactions of Co with acetate and hydroxyl ligands in these compounds. Here we show that the substitution of acetate ligands with hydroxyls in these compounds causes an increase in the electron density on Co, driven by the loss of a π back-bonding interaction between Co and acetate and an increase in electron donation to Co from the hydroxyl ligands. We further classify the bonding between Co and acetate based on the orbital overlap and show that the experimental absorption and emission spectra are well-described by the resulting molecular orbitals. Finally, we predict the impacts of acetate/hydroxyl ligand exchange on autoxidation catalytic properties, showing that the reaction free energies for key Co oxidation and reduction steps are extremely sensitive to metal-ligand bonding interactions and thus have meaningful impacts on overall reactivity. The results of this study constitute an important set of design criteria for developing novel homogeneous autoxidation catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Multiplexed fitness profiling by RB-TnSeq elucidates pathways for lignin-related aromatic catabolism in Sphingobium sp. SYK-6

Bioconversion of lignin-related aromatic compounds relies on robust catabolic pathways in microbes. Sphingobium sp. SYK-6 (SYK-6) is a well-characterized aromatic catabolic organism that has served as a model for microbial lignin conversion, and its utility as a biocatalyst could potentially be further improved by genome-wide metabolic analyses. To this end, we generate a randomly barcoded transposon insertion mutant (RB-TnSeq) library to study gene function in SYK-6. The library is enriched under dozens of enrichment conditions to quantify gene fitness. Several known aromatic catabolic pathways are confirmed, and RB-TnSeq affords additional detail on the genome-wide effects of each enrichment condition. Selected genes are further examined in SYK-6 or Pseudomonas putida KT2440, leading to the identification of new gene functions. The findings from this study further elucidate the metabolism of SYK-6, while also providing targets for future metabolic engineering in this organism or other hosts for the biological valorization of lignin.

09 BIOMASS FUELS↗
DOE OSTI2023

Mono-material product design with bio-based, circular, and biodegradable polymers

The traditional multi-material product design of plastic products significantly complicates both existing and emerging recycling processes. Here, we discuss the concept of mono-material product design, which is based on circular and biodegradable polymers made of a single monomer, delivering tailorable properties via molecular or macromolecular engineering without changing its chemical makeup or composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Stereoinversion via Alcohol Dehydrogenases Enables Complete Catabolism of β-1-Type Lignin-Derived Aromatic Isomers

Sphingobium sp. strain SYK-6 is an efficient aromatic catabolic bacterium that can consume all four stereoisomers of 1,2-diguaiacylpropane-1,3-diol (DGPD), which is a ring-opened β-1-type dimer. Recently, LdpA-mediated catabolism of erythro-DGPD was reported in SYK-6, but the catabolic pathway for threo-DGPD was as yet unknown. Here, in this study, we elucidated the catabolism of threo-DGPD, which proceeds through conversion to erythro-DGPD. When threo-DGPD was incubated with SYK-6, the Cα hydroxy groups of threo-DGPD (DGPD I and II) were initially oxidized to produce the Cα carbonyl form (DGPD-keto I and II). This initial oxidation step is catalyzed by Cα-dehydrogenases, which belong to the short-chain dehydrogenase/reductase (SDR) family and are involved in the catabolism of β-O-4-type dimers. Analysis of seven candidate genes revealed that NAD + -dependent LigD and LigL are mainly involved in the conversion of DGPD I and II, respectively. Next, we found that DGPD-keto I and II were reduced to erythro-DGPD (DGPD III and IV) in the presence of NADPH. Genes involved in this reduction were sought from Cα-dehydrogenase and ldpA-neighboring SDR genes. The gene products of SLG_12690 (ldpC) and SLG_12640 (ldpB) catalyzed the NADPH-dependent conversion of DGPD-keto I to DGPD III and DGPD-keto II to DGPD IV, respectively. Mutational analysis further indicated that ldpC and ldpB are predominantly involved in the reduction of DGPD-keto. Together, these results demonstrate that SYK-6 harbors a comprehensive catabolic enzyme system to utilize all four β-1-type stereoisomers through successive oxidation and reduction reactions of the Cα hydroxy group of threo-DGPD with a net stereoinversion using multiple dehydrogenases.

09 BIOMASS FUELS↗
DOE OSTI2023

RB-TnSeq identifies genetic targets for improved tolerance of Pseudomonas putida towards compounds relevant to lignin conversion

We report lignin-derived mixtures intended for bioconversion commonly contain high concentrations of aromatic acids, aliphatic acids, and salts. The inherent toxicity of these chemicals places a significant bottleneck upon the effective use of microbial systems for the valorization of these mixtures. Pseudomonas putida KT2440 can tolerate stressful quantities of several lignin-related compounds, making this bacterium a promising host for converting these chemicals to valuable bioproducts. Nonetheless, further increasing P. putida tolerance to chemicals in lignin-rich substrates has the potential to improve bioprocess performance. Accordingly, we employed random barcoded transposon insertion sequencing (RB-TnSeq) to reveal genetic determinants in P. putida KT2440 that influence stress outcomes during exposure to representative constituents found in lignin-rich process streams. The fitness information obtained from the RB-TnSeq experiments informed engineering of strains via deletion or constitutive expression of several genes. Namely, ΔgacAS, ΔfleQ, ΔlapAB, ΔttgR::P tac :ttgABC, Ptac:PP_1150:PP_1152, ..delta..relA, and ΔPP_1430 mutants showed growth improvement in the presence of single compounds, and some also exhibited greater tolerance when grown using a complex chemical mixture representative of a lignin-rich chemical stream. Overall, this work demonstrates the successful implementation of a genome-scale screening tool for the identification of genes influencing stress tolerance against notable compounds within lignin-enriched chemical streams, and the genetic targets identified herein offer promising engineering targets for improving feedstock tolerance in lignin valorization strains of P. putida KT2440.

09 BIOMASS FUELS↗