Search NASA⌕ Search

Engineering topics

Beckingham, Lauren E.

Publications and source records attributed to Beckingham, Lauren E..

12 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A Review of Coupled Geochemical–Geomechanical Impacts in Subsurface CO 2 , H 2 , and Air Storage Systems

Increased demand for decarbonization and renewable energy has led to increasing interest in engineered subsurface storage systems for large-scale carbon reduction and energy storage. In these applications, a working fluid (CO 2 , H 2 , air, etc.) is injected into a deep formation for permanent sequestration or seasonal energy storage. The heterogeneous nature of the porous formation and the fluid–rock interactions introduce complexity and uncertainty in the fate of the injected component and host formations in these applications. Interactions between the working gas, native brine, and formation mineralogy must be adequately assessed to evaluate the efficiency, risk, and viability of a particular storage site and operational regime. This study reviews the current state of knowledge about coupled geochemical–geomechanical impacts in geologic carbon sequestration (GCS), underground hydrogen storage (UHS), and compressed air energy storage (CAES) systems involving the injection of CO 2 , H 2 , and air. Specific review topics include (1) existing injection induced geochemical reactions in these systems; (2) the impact of these reactions on the porosity and permeability of host formation; (3) the impact of these reactions on the mechanical properties of host formation; and (4) the investigation of geochemical-geomechanical process in pilot scale GCS. This study helps to facilitate an understanding of the potential geochemical–geomechanical risks involved in different subsurface energy storage systems and highlights future research needs.

08 HYDROGEN↗
DOE OSTI2021

Role of Mineralogy in Controlling Fracture Formation

The presence of fractures in caprocks can pose increased risks in subsurface energy systems and processes like CO 2 sequestration by introducing high-permeability leakage paths. Fracture apertures and permeability can be altered through mineral dissolution and precipitation reactions, but the reactive evolution of fractures is not well understood. In fractures, minerals that are otherwise inaccessible to reactive fluids can become exposed, resulting in mineral reactions unpredicted by bulk formation data. This work seeks to understand the relationship between mineralogy and fracture formation to enhance our understanding of reactive fracture evolution and CO 2 leakage potential. Here, the mineral compositions of mechanically induced fracture surfaces in samples of the Mancos and Marcellus shales have been quantified and compared to those of the near-fracture matrices using imaging and bulk X-ray diffraction (XRD) data. In the Mancos shale, the concentrations of clay minerals are enhanced along fracture surfaces with respect to the bulk, and the fracture is most likely to form at kaolinite–kaolinite interfaces. Further, evaluation of the mineralogical spatial variability through cross-correlation analysis of the surrounding matrix in images of samples cut perpendicular to the fracture shows that clay is 16.7 times more likely to be present than carbonate minerals near the fracture surface. The high correlation persists roughly 200 μm into the surrounding matrix for the Mancos sample and implies that the fracture formed within a defined clay-rich lithofacies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Porosity-Permeability Evolution During Simultaneous Mineral Dissolution and Precipitation

Permeability in reactive porous media evolves in complex ways that are hard to predict. Macroscopic empirical equations are often used to estimate permeability evolution but fail to reflect the impact of pore scale reactions on permeability. This work aims to understand the evolution of permeability in systems where mineral dissolution and precipitation occur simultaneously. Pore network models are used for permeability simulation of a Paluxy sandstone using pore and pore-throat size distributions from the analysis of X-ray CT images. Pore and pore-throat radii are increased and decreased to reflect the effects of dissolution and precipitation reactions. Varying spatial distributions of reactions are simulated and the resulting porosity and permeability values compared with commonly used macroscopic equations. It is observed that when dissolution occurs at the inlet and precipitation at the outlet, porosity increases while permeability decreases. Similar results are also observed in the respective opposite scenario where precipitation occurs at the inlet and dissolution at the outlet. When dissolution and precipitation reactions are randomly distributed throughout the network, porosity increases with little change in permeability that is not captured by the empirical equations. When reactions are controlled by pore and pore-throat sizes, such as dissolution occurring in pores and pore-throats of small size and precipitation in pores and pore-throats of larger size, porosity and permeability decrease. When precipitation occurs in pores and pore-throats of smaller size and dissolution in pores and pore-throats of larger size, porosity and permeability increase and is described relatively well by the Verma-Pruess porosity-permeability equation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The impact of mineral reactive surface area variation on simulated mineral reactions and reaction rates

Reactive transport modeling is an essential tool to simulate complex geochemical reactions in porous media that can impact formation properties including porosity and permeability. However, simulating these reactions is challenging due to uncertainties in model parameters, particularly mineral surface areas. Imaging has emerged as a powerful means of estimating model parameters including porosity and mineral abundance, accessibility and accessible surface area. However, these parameters, particularly mineral accessible surface area, vary with image resolution. This work aims to enhance understanding of the impact of image resolution and other means of estimating mineral reactive surface area on simulated mineral reactions and reaction rates. Mineral surface areas calculated from images with resolutions of 0.34 μm and 5.71 μm were used to simulate mineral reactions in the context of geologic CO 2 sequestration in the Paluxy formation at the continuum scale. Additional simulations were carried out using BET surface areas collected from the literature and geometric surface areas. Simulations were run for 7300 days and mineral volume fractions and effluent ion concentrations tracked and compared. Variations in mineral surface areas measured from images are within 1 order of magnitude and yield similar simulation results, indicating the impact of image resolution on simulated reactions and reaction rates is minimum for the resolutions and sample considered. In comparison, surface areas obtained from BET and geometric approaches are 1–4 orders of magnitude higher than image-obtained surface areas and result in greater simulated reaction rates and extents. Minerals with high reaction rates (calcite and siderite) are most impacted by surface area values at short times where simulated mineral volume fractions at longer times agree relatively well, even for simulations with several orders of magnitude variation in surface area. Phases with lower reaction rates, such as K-feldspar and muscovite, are predominantly impacted over longer times where variations in surface areas impact reaction extents and porosity evolution. Overall, variations in surface areas due to image resolution are small and result in little variation in simulated reactions and reaction rates while there are significant variations in simulation results when other surface area estimates are used. These variations, however, depend on the reactivity of the mineral phase where surface areas of fast-reacting phases largely impact simulations at short (hours to days) timescales and surface areas of slower-reactive phases impact longer term simulations (years).

58 GEOSCIENCES↗