Engineering topics
Publications and source records attributed to Bedick, Clinton.
This submission includes a comprehensive data set for the NETL Enclosed Sydney Swirl Burner, generated between 2012 and 2014. The data set includes global parametric data and advanced diagnostic data for (3) flames of interest to CFD model validation. The submission includes a companion summary document describing the data and associated references.
Hydrogen and ammonia represent two carbon-free fuel sources that could be used in place of current fossil energy sources in combustion systems. To develop optimized ammonia combustion systems, validated modeling tools are needed. In the open literature, it has been shown that the complex chemistry associated with fuel-bound nitrogen contained in ammonia differs greatly from natural gas or hydrogen combustion. As a result, several new chemical kinetic mechanisms have been developed. Many of these mechanisms have been validated experimentally, however this has primarily focused on bulk parameters such as laminar flame speed and ignition delay time. Critically, high quality measurements of species concentrations are needed under controlled conditions which are easily represented by simple models. In this paper, direct, in-situ measurements of species concentrations and gas temperature are performed in a laminar flat-flame burner. This arrangement enables comparison with 1D model predictions, better isolating chemical kinetics from the fluid dynamics. Quantitative species concentrations are determined by absorption spectroscopy using an FTIR spectrometer. Fuel compositions representative of cracked ammonia (NH 3 /H 2 ) and ammonia-natural gas (NH 3 /CH 4 ) are considered for rich and lean equivalence ratios. A major focus of the paper is on the selection of spectral features for nitric oxide and ammonia and correcting for large amounts of baseline H 2 O absorption.
Conventional gas turbine engines rely on an idealized constant pressure combustion process that in reality produces a pressure decrease as a result of viscous and other non-reversible losses. An alternative approach is rotating detonation combustion (RDC) which is a form of pressure gain combustion in which one or more detonation waves propagate an annular channel resulting in an increase in pressure across, subsequently providing greater work availability compared to deflagration ultimately leading to opportunities for greater thermodynamic efficiency when used in gas turbine engines that conventionally relies on constant. Modern gas turbine engines often rely on pre-mixed reactants to limit NOx emissions, although this may result in greater susceptibility to instabilities such as flashback and thermoacoustic oscillation, particularly for applications that utilize hydrogen as the fuel. Research in RDC has focused on non-premixed reactants thus limiting the occurrence of flashback, and high frequency detonation wave propagation (kHz) may interfere with the occurrence of thermoacoustic oscillations. Thermal NOx emissions are controlled through rapid combustion and sudden expansion of the working fluid. Although RDC may not be susceptible to instabilities encountered in conventional state of the art gas turbine engine combustion, there may be other mechanisms occurring that support instabilities that could be detrimental to performance.
Presentation given at the 2024 University Turbines System Research conference describing NETL Research and Innovation Center work associated with ammonia combustion for gas turbine engines.
Presentation at the 2024 ASME Turbo Expo detailing in-situ NO, NH3, H2O, and temperature measurements in CH4/NH3 and H2/NH3 flames using FTIR spectroscopy.
Hydrogen and ammonia represent two carbon-free fuel sources that could be used in place of current fossil energy sources in combustion systems. To develop optimized ammonia combustion systems, validated modeling tools are needed. In the open literature, it has been shown that the complex chemistry associated with fuel-bound nitrogen contained in ammonia differs greatly from natural gas or hydrogen combustion. As a result, several new chemical kinetic mechanisms have been developed. Many of these mechanisms have been validated experimentally, however this has primarily focused on bulk parameters such as laminar flame speed and ignition delay time. Critically, high quality measurements of species concentrations are needed under controlled conditions which are easily represented by simple models. In this paper, direct, in-situ measurements of species concentrations and gas temperature are performed in a laminar flat-flame burner. This arrangement enables comparison with 1D model predictions, better isolating chemical kinetics from the fluid dynamics. Quantitative species concentrations are determined by absorption spectroscopy using an FTIR spectrometer. Fuel compositions representative of cracked ammonia (NH3/H2) and ammonia-natural gas (NH3/CH4) are considered for rich and lean equivalence ratios. A major focus of the paper is on the selection of spectral features for nitric oxide and ammonia and correcting for large amounts of baseline H2O absorption.
In an effort to investigate the viability of ammonia and hydrogen as fuels in the industrial heating sector, the Department of Energy’s National Energy Technology Laboratory is developing a 250 kW burner test facility. The pursuit of a decarbonized industrial heating sector requires innovative approaches to convert existing assets to alternative fuels while maintaining adequate radiative heat transfer and limiting NOx. This new capability will leverage NETL’s experience and prior investments in ammonia and hydrogen combustion, to advance atmospheric pressure industrial combustion systems for industries such as cement kilns and glass factories. The intention in coming years is to collaborate with burner manufacturers and heavy industry partners to study, develop, and validate strategies for converting existing hardware from carbon-based fuels to next-generation clean ammonia and hydrogen technologies.
The National Energy Technology Laboratory (NETL) and Toptica Photonics (Participant) will collaborate to demonstrate the application of a frequency-comb laser (dual-comb spectroscopy) in an optically accessible rotating detonation engine (RDE). RDEs are a next-generation energy conversion technology which are well-suited to hydrogen usage and have the potential to significantly increase the efficiency of gas turbine engine power cycles. However, critical information is needed about the high temperature and pressure detonation wave, which represents an extremely challenging diagnostic environment. Dual-comb spectroscopy can be used to characterize the pressure-broadened IR absorption features at MHz rates, providing information not possible with conventional tunable diode laser (TDL) technologies. This collaboration will, for the first time, demonstrate application of dual-comb spectroscopy within the combustion annulus of a hydrogen-air RDE. If successful, the data generated will help to accelerate commercialization of RDE technologies in support of decarbonizing our nation’s energy sector.
Poster from the 2024 NETL Resource Sustainability Project Review Meeting for Task 8 of the Natural Gas Infrastructure FWP.
The purpose of developing this report is to provide an assessment of gas flare technologies, with the intent of informing future high-impact R&D investments that can be used to realize significant reductions in methane and other greenhouse gas (GHG) emissions from U.S. oil and natural gas (ONG) operations
Published data for run times exceeding a few seconds in rotating detonation engines (RDEs) is rare, but long duration tests are necessary to understand both transient and persistent phenomena in RDE operation. Previous work has noted different detonation wave modes at different equivalence ratios. In the current study, multiple long-duration runs with constant air flow rate and variable equivalence ratio are conducted in a hydrogen-fueled, water-cooled RDE. Analysis of the capillary tube averaged pressure (CTAP) data reveals a strong correlation with equivalence ratio as well as a small time dependency due to transient thermal processes. Ion probe measurements are used to analyze detonation wave frequencies and modes, both of which are strongly dependent on the equivalence ratio. Mode transitions are observed to occur consistently as the equivalence ratio is traversed between 0.55 and 0.60. These transitions are also found to be a function of the direction of changing equivalence ratio (ascending or descending) and time.
Published data for run times exceeding a few seconds in rotating detonation engines (RDEs) is rare, but long duration tests are necessary to understand both transient and persistent phenomena in RDE operation. Previous work has noted different detonation wave modes at different equivalence ratios. In the current study, multiple long-duration runs with constant air flow rate and variable equivalence ratio are conducted in a hydrogen-fueled, water-cooled RDE. Analysis of the capillary tube averaged pressure (CTAP) data reveals a strong correlation with equivalence ratio as well as a small time dependency due to transient thermal processes. Ion probe measurements are used to analyze detonation wave frequencies and modes, both of which are strongly dependent on the equivalence ratio. Mode transitions are observed to occur consistently as the equivalence ratio is traversed between 0.55 and 0.60. These transitions are also found to be a function of the direction of changing equivalence ratio (ascending or descending) and time.
For presentation at the October 2023 Association for Iron & Steel webinar on ammonia combustion.
Invited lecture presented as part of the 2023 University of Central Florida - Mechanical and Aerospace Engineering Seminar Series. These slides discuss the role of multi-sourced hydrogen for electrical power generation. Particular focus is given to the combustion of hydrogen for the purpose of chemical to thermal energy. Pressure gain combustion is given as an example technology that could leverage hydrogen as a fuel source ultimately leading to higher rates of energy conversion (chemical to electrical) resulting in greater energy security and reduced cost of electricity.
Presentation from the 2023 Clearwater Clean Energy Conference detailing laminar flame speed measurements in CH4/NH3 and H2/NH3 mixtures.
Slides detailing NETL in-house research involving ammonia combustion
2023 AIAA SciTech presentation describing quantitative ion probe analysis in an RDE
Presentation presenting results of the NETL water-cooled RDE.