Engineering topics
Bell, Alexis T.
Publications and source records attributed to Bell, Alexis T..
The role of manganese in CoMnO x catalysts for selective long-chain hydrocarbon production via Fischer-Tropsch synthesis
Cobalt is an efficient catalyst for Fischer–Tropsch synthesis (FTS) of hydrocarbons from syngas (CO + H 2 ) with enhanced selectivity for long-chain hydrocarbons when promoted by Manganese. However, the molecular scale origin of the enhancement remains unclear. Here we present an experimental and theoretical study using model catalysts consisting of crystalline CoMnO x nanoparticles and thin films, where Co and Mn are mixed at the sub-nm scale. Employing TEM and in-situ X-ray spectroscopies (XRD, APXPS, and XAS), we determine the catalyst’s atomic structure, chemical state, reactive species, and their evolution under FTS conditions. We show the concentration of CH x , the key intermediates, increases rapidly on CoMnO x , while no increase occurs without Mn. DFT simulations reveal that basic O sites in CoMnO x bind hydrogen atoms resulting from H 2 dissociation on Co 0 sites, making them less available to react with CH x intermediates, thus hindering chain termination reactions, which promotes the formation of long-chain hydrocarbons.
Mechanism and Kinetics of Ethanol–Acetaldehyde Conversion to 1,3-Butadiene over Isolated Lewis Acid La Sites in Silanol Nests in Dealuminated Beta Zeolite
Biomass-derived ethanol (EtOH) and acetaldehyde (AcH) conversion to 1,3-butadiene (1,3-BD) is an alternative process for 1,3-BD production. The present investigation reports the preparation and characterization of isolated La sites introduced into the silanol nests in DeAlBEA as well as detailed studies of the mechanism and kinetics for the conversion of an EtOH-AcH mixture to 1,3-BD. La sites supported on DeAlBEA are found to be present as (≡SiO) 2 La-OH groups that are H-bonded with adjacent Si-OH groups, possessing high C-C coupling activity and stability, superior to state-of-the-art Y-DeAlBEA. La sites supported on silica (La-SiO 2 ) with a similar chemical structure but no H-bonding interaction with Si-OH groups were prepared for comparison. Lewis acid La sites promote AcH aldol condensation, and the activity of such sites is nearly identical for both La-DeAlBEA and La-SiO 2 . Further, the rate of C 4 product formation increases by a factor of 4.8 upon addition of EtOH to the feed of AcH over La-DeAlBEA, whereas that over La/SiO 2 remains unchanged. Investigation of the mechanism and kinetics of AcH aldol condensation and EtOH-AcH conversion to 1,3-BD revealed two C-C bond forming pathways-AcH aldol condensation by Lewis acid La sites and direct coupling of EtOH-AcH over H-bonded (≡SiO) 2 La-OH···HO-Si≡ sites. This study provides important information about the role of the local environment of isolated Lewis acid sites and their effects on the direct coupling of EtOH and AcH to form 1,3-BD.
Local ionic transport enables selective PGM-free bipolar membrane electrode assembly
Bipolar membranes in electrochemical CO 2 conversion cells enable different reaction environments in the CO 2 -reduction and O 2 -evolution compartments. Under ideal conditions, water-splitting in the bipolar membrane allows for platinum-group-metal-free anode materials and high CO 2 utilizations. In practice, however, even minor unwanted ion crossover limits stability to short time periods. Here we report the vital role of managing ionic species to improve CO 2 conversion efficiency while preventing acidification of the anodic compartment. Through transport modelling, we identify that an anion-exchange ionomer in the catalyst layer improves local bicarbonate availability and increasing the proton transference number in the bipolar membranes increases CO 2 regeneration and limits K + concentration in the cathode region. Through experiments, we show that a uniform local distribution of bicarbonate ions increases the accessibility of reverted CO 2 to the catalyst surface, improving Faradaic efficiency and limiting current densities by twofold. Using these insights, we demonstrate a fully platinum-group-metal-free bipolar membrane electrode assembly CO 2 conversion system exhibiting <1% CO 2 /cation crossover rates and 80-90% CO 2 -to-CO utilization efficiency over 150 h operation at 100 mA cm -2 without anolyte replenishment.
CO 2 Conversion to Butene via a Tandem Photovoltaic–Electrochemical/Photothermocatalytic Process: A Co-design Approach to Coupled Microenvironments
Here, we developed a tandem, unassisted, solar-driven electrochemical and photothermocatalytic process for the single-pass conversion of CO 2 to butene using only simulated solar irradiation as the energetic input. The two-step process involves electrochemical CO 2 reduction (CO 2 R) to ethylene followed by ethylene dimerization to butene. We assessed two unassisted electrochemical setups to concentrate ethylene in the CO 2 R reactor, achieving concentrations up to 5.4 vol.% with 1.8% average solar-to-ethylene conversion and 5.6% average CO 2 -to-ethylene single-pass conversion under 1-sun illumination. When passed through the photothermocatalytic ethylene oligomerization reactor, we generated 600 ppm of butene under 3-sun illumination. Through analysis of this process, we identified that the presence of H 2 , CO, and H 2 O leads to rapid deactivation of the Ni-based ethylene oligomerization catalyst.
Modeling Diurnal and Annual Ethylene Generation from Solar-Driven Electrochemical CO 2 Reduction Devices
Integrated solar fuels devices for CO 2 reduction (CO 2 R) are a promising technology class towards achieving net-negative carbon emissions. Designing integrated CO 2 R solar fuels devices requires careful co-design of electrochemical and photovoltaic components as well as consideration of the diurnal and seasonal effects of solar irradiance, temperature, and other meteorological factors expected for ‘on-sun’ deployment. Here, using a photovoltaic-electrochemical (PV-EC) platform, we developed a temperature and potential-dependent diurnal and annual model using experimental CO 2 R performance of Cu-based electrocatalysts, local meteorological data from the National Solar Radiation Database (NSRD), and modeled performance of commercial c-Si PVs. We simulated diurnal product outputs with and without the effects of ambient temperature to determine gaseous product temperature sensitivity. From these outputs, we observed seasonal variation in gaseous product generation, with up to two-fold increases in ethylene productivity between the Winter and Summer, analyzed the consequences of dynamic cloud coverage, and identified periods where device cooling/heating mechanisms could be implemented to maximize ethylene generation. Finally, we modeled the annual ethylene generation for a scaled 1 MW solar farm at three different locations (Beijing, CN; Sydney, AUS; Barstow, CA) to determine the consequences of local meteorological climates on PV-EC CO 2 R product output, recording a maximum ethylene output of 18.5 tonne/yr at Barstow. Overall, this model presents a critical tool for streamlining the translation of experimental solar-driven electrochemical research to real-world implementation.
Exploring CO 2 reduction and crossover in membrane electrode assemblies
Electrochemical CO 2 reduction (CO 2 R) using renewable electricity is a key pathway toward synthesizing fuels and chemicals. In this study, multi-physics modeling is used to interpret experimental data obtained for CO 2 R to CO using Ag catalysts in a membrane electrode assembly. The one-dimensional model is validated using measured CO 2 crossover and product formation rates. The kinetics of CO formation are described by Marcus–Hush–Chidsey kinetics, which enables accurate prediction of the experimental data by accounting for the reorganization of the solvent during CO 2 R. Further, the results show how the performance is dictated by competing phenomena including ion formation and transport, CO 2 solubility, and water management. The model shows that increasing the ion-exchange capacity of the membrane and surface area of the catalyst increases CO formation rates by >100 mA cm –2 without negatively impacting CO 2 utilization. Here we provide insights into how to manage the trade-off between productivity and CO 2 utilization in CO 2 electrolyzers.
M–Ge–Si thermolytic molecular precursors and models for germanium-doped transition metal sites on silica
The new siloxy-germoxy ligand HOGe[OSi(O t Bu) 3 ] 3 generates Mn-, Fe-, and Cr-containing precursors suitable for thermolytic molecular precursor routes to quaternary oxides.
Recommendations for improving rigor and reproducibility in site specific characterization
Heterogeneous catalysis is driven by the interaction of reactant molecules and the catalyst surface. The locus of this interaction as well as the surrounding ensemble of atoms is referred to as the catalyst active site. Active site characterization attempts to distinguish active catalytic sites from inactive surface sites, to elucidate the structural and chemical nature of active sites, and to quantify active site concentration. Numerous techniques have been demonstrated to provide compositional and structural information about the active sites within a catalyst. However, each technique has its own limitations and experimental pitfalls that can lead to data misinterpretation or irreproducible results. Further, this work aims to provide an overview of the types of data that can be collected, to outline common experimental challenges and how to avoid them, and to assemble relevant references for the most used active site characterization techniques. More broadly, we aim to outline best practices for researchers to collect, interpret, and report active site characterization data in a way that provides the most benefit to the broader catalysis community. Increasing the rigor and reproducibility of active site characterization offers a strategy to better link properties with catalytic performance and to enable the community to develop consensus concerning these relationships.
Modeling diurnal and annual ethylene generation from solar-driven electrochemical CO 2 reduction devices
Integrated solar fuels devices for CO 2 reduction (CO 2 R) are a promising technology class towards reducing carbon emissions. Designing integrated CO 2 R solar fuels devices requires careful co-design of electrochemical and photovoltaic components as well as consideration of the diurnal and seasonal effects of solar irradiance, temperature, and other meteorological factors expected for ‘on-sun’ deployment. Using a photovoltaic-electrochemical (PV-EC) platform, we developed a temperature and potential-dependent diurnal and annual model using experimentally-determined CO 2 R performance of Cu-based electrocatalysts, local meteorological data from the National Solar Radiation Database (NSRD), and modeled performance of commercial c-Si PVs. Here we simulated gaseous diurnal product outputs with and without the effects of ambient temperature. From these outputs, we observed seasonal variation in gaseous product generation, with up to two-fold increases in ethylene productivity between the Winter and Summer, analyzed the consequences of dynamic cloud coverage, and identified periods where device cooling/heating mechanisms could be implemented to maximize ethylene generation. Finally, we modeled the annual ethylene generation for a scaled 1 MW solar farm at three different locations (Beijing, CN; Sydney, AUS; Barstow, CA) to determine the consequences of local meteorological climates on PV-EC CO 2 R product output, recording a maximum ethylene output of 18.5 tonne per year at Barstow. Overall, this model presents a critical tool for streamlining the translation of experimental solar-driven electrochemical research to real-world implementation.
Multi-scale physics of bipolar membranes in electrochemical processes
Bipolar membranes (BPMs) enable control of ion concentrations and fluxes in electrochemical cells suitable for a wide range of applications. Here, in this work, we present the multi-scale physics of BPMs in an electrochemical engineering context and articulate design principles to drive the development of advanced BPMs. The chemistry, structure, and physics of BPMs are illustrated and related to the thermodynamics, transport phenomena, and chemical kinetics that dictate ion and species fluxes and selectivity. These interactions give rise to emergent structure–property–performance relationships that yield design criteria for BPMs that achieve high permselectivity, durability, and voltaic efficiency. The resulting performance trade-offs for BPMs are presented in the context of emerging applications in energy conversion or storage, and environmental remediation. By connecting the fundamental physical phenomena in BPMs to device-level performance and engineering, we aim to facilitate the development of next-generation BPMs for sustainable electrochemical processes.
Co-Design of Multijunction Photoelectrochemical Devices for Unassisted CO 2 Reduction to Multicarbon Products
Photoelectrochemical (PEC) CO 2 reduction (PEC CO 2 R) is a prospective approach for utilizing solar energy to synthesize a variety of carbon-containing chemicals and fuels, the most valuable of which are multicarbon (C 2+ ) products, such as ethylene and ethanol. While these products can be produced with high faradaic efficiency using Cu, this occurs over a relatively narrow potential range, which, in turn, imposes constraints on the design of a device for PEC CO 2 R. Herein, we used continuum-scale modeling to simulate the solar-to-C 2+ (STC 2+ ) efficiency of PEC CO 2 R devices fed with CO 2 -saturated, 0.1 M CsHCO 3 . We then explored how cell architecture and the use of single or dual photoelectrode(s) alters the optimal combination of photoelectrode bandgaps for high STC 2+ efficiency. Ultimately, this work provides guidance for the co-design of the device architecture and photoelectrode bandgaps required to achieve high STC 2+ efficiency. The insights gained are then used to identify systems that yield the highest amount of C 2+ products throughout the day and year.
Sheet-like silicalite-1 single crystals with embedded macropores displaying superior catalytic performance
Dry-gel synthesis of sheet-like Silicalite-1 single crystals featuring intracrystalline macropores and short b -axis dimension.
Exploring Proton Activity at the Membrane/Electrode Interface with Microelectrodes
Microelectrode measurements using a polycrystalline platinum microelectrode were used to simulate the membrane/electrode interface of a membrane-electrode-assembly (MEA) architecture. The proton activity for the hydrogen-evolution reaction (HER) was evaluated for 40, 60, and 80% relative humidity. Proton activity was calculated to be 0.5, 1.0 and 2.0 for 40, 60, and 80% relative humidity, respectively, using open circuit potential measurements between Nafion 211 and 1 molal HClO 4 . The fraction of protons which dissociate at a given relative humidity condition appears to be a distinctive factor in proton activity for Nafion 211 compared to an aqueous electrolyte. In conclusion, the microelectrode measurements exhibited a Tafel slope of ~120 mV/dec, similar to that observed for platinum in MEA systems, demonstrating that kinetic measurements made with microelectrodes can be representative of MEA kinetics.
Analysis of bipolar membranes for electrochemical CO 2 capture from air and oceanwater
Carbon dioxide (CO 2 ) must be removed from the atmosphere to mitigate the negative effects of climate change. However, the most scalable methods for removing CO 2 from the air require heat from fossil-fuel combustion to produce pure CO 2 and continuously regenerate the sorbent. Bipolar-membrane electrodialysis (BPM-ED) is a promising technology that uses renewable electricity to dissociate water into acid and base to regenerate bicarbonate-based CO 2 capture solutions, such as those used in chemical loops of direct-air-capture (DAC) processes, and in direct-ocean capture (DOC) to promote atmospheric CO 2 drawdown via decarbonization of the shallow ocean. In this study, we develop an experimentally validated 1D model for the electrochemical regeneration of CO 2 from bicarbonate-based carbon capture solutions and seawater using BPM-ED. For DAC, our experimental and computational results demonstrate that pH swings induced by BPM water dissociation drive the formation of CO 2 at the cation-exchange layer|catholyte interface with energy-intensities of less than 150 kJ mol -1 . However, high rates of bubble formation increase energy intensity at current densities >100 mA cm -2 . Correspondingly, accelerating water dissociation catalysis and enacting bubble removal could enable CO 2 recovery at energy intensities <100 kJ mol -1 and current densities >100 mA cm -2 . For DOC, mass transport limitations associated with low carbon concentrations in oceanwater suggest that DOC is best suited for clean production of acid and base usable in downstream processes. Further, these results provide design principles for industrial-scale CO 2 recovery using BPM-ED.
Toward a Diverse Next-Generation Energy Workforce: Teaching Artificial Photosynthesis and Electrochemistry in Elementary Schools through Active Learning
Artificial photosynthesis is a promising approach to generate commodity chemicals using abundant chemical feedstocks and renewable energy sources. Despite its importance, affordable and effective hands-on classroom activities that demonstrate artificial photosynthesis and teach key concepts, especially for primary school students, are lacking. Educating young students on this topic is a critical step in the development of the next-generation energy workforce, especially one that is diverse in race and gender. Here, we hypothesize that an effective approach to educate a broad range of young students on the topic of artificial photosynthesis is through the use of an active learning-based lesson plan that employs cheap and accessible materials. This hypothesis is confirmed by evaluating the understanding of fifth grade students with a survey before and after a lesson plan on artificial photosynthesis that uses active-learning techniques and uses safe and highly accessible materials (baking soda, tap water, plastic jars, Ni coil, alligator clips, and a solar cell) to perform solar-powered water splitting. The lesson plan and survey questions are designed to align with the educational outcomes for fifth grade classrooms in California and to address four general learning objectives: (1) Motivations of Artificial Photosynthesis, (2) Applications of Artificial Photosynthesis, (3) Inputs and Outputs of Artificial Photosynthesis, and (4) Engineering Design for Artificial Photosynthesis. The survey data demonstrate a statistically significant improvement in overall student understanding from the lesson plan. Importantly, the data show that the lesson plan presented here is effective at narrowing the performance gap between minority students and overly represented groups.
Coupling covariance matrix adaptation with continuum modeling for determination of kinetic parameters associated with electrochemical CO2 reduction
Not Available
Codesign of an integrated metal–insulator–semiconductor photocathode for photoelectrochemical reduction of CO 2 to ethylene
Photoelectrochemical carbon-dioxide reduction (PEC CO 2 R) is a potentially attractive means for producing chemicals and fuels using sunlight, water, and carbon dioxide; however, this technology is in its infancy. To date, most studies of PEC CO 2 R have reported products containing one carbon atom (C 1 products) but the production of valuable products containing two or more carbons (C 2+ products), such as ethylene, ethanol, etc., is rarely demonstrated. Metal–semiconductor–insulator (MIS) photocathode/catalyst structures offer a promising approach for this purpose, since they integrate the functions of light absorption, charge separation, and catalysis. In this study, we have investigated a Cu/TiO 2 /p-Si photocathode/catalyst structure with the aim of establishing the effects of semiconductor–insulator interactions on the performance of the photocathode and the influence of the direction of illumination of the MIS structure on the total current density and the distribution of products formed by on the Cu catalyst. Here, we have also examined the influence of ionomer coatings deposited on the Cu surface on the total current density and the distribution of products formed. A major finding is that for a fixed Cu potential the distribution of products formed by PEC CO 2 R are the same, irrespective of the direction of illumination, and are identical to those obtained by electrochemical reduction of CO 2 (EC CO 2 R). Another important finding is that the total current density and the faradaic efficiency to ethylene are enhanced significantly by deposition of a thin bilayer of Sustainion/Nafion onto the surface of the Cu.