Search NASA⌕ Search

Engineering topics

Bell, Alexis T.

Publications and source records attributed to Bell, Alexis T..

At least 181 records · Page 10

Band-Gap Energy as a Descriptor of Catalytic Activity for Propene Oxidation over Mixed Metal Oxide Catalysts

The development of a descriptor or descriptors that can relate the activity of catalysts to their physical properties is a major objective of catalysis research. In this study, we have found that the apparent activation energy for propene oxidation to acrolein over scheelite-structured, multicomponent, mixed metal oxides (Bi 3 FeMo 2 O 12 , Bi 2 Mo 2.5 W 0.5 O 12 , and Bi 1- x /3 V 1- x Mo x O 4 , where 0 x 1) correlates with the band gap of the catalyst measured at reaction temperature. We show through theoretical analysis of the energy components comprising the activation energy why the band-gap energy is the primary component dependent on catalyst composition and, hence, why one should expect the activation energy for propene oxidation to correlate with the band-gap energy. We also demonstrate that the change in band-gap energy with composition arises from the interplay between the sizes and energies of the V 3d, Fe 3d, Mo 4d, and W 5d orbitals, which give rise to the lowest unoccupied crystal orbitals. Both the utility of the band-gap energy as a descriptor for catalytic activity and the role of orbital overlap in determining the band gap are likely to be general features in mixed metal oxide oxidation catalysts, enabling the rational design of catalysts with greater activity for oxidation reactions.

activation energy↗

Biomass conversion to diesel via the etherification of furanyl alcohols catalyzed by Amberlyst-15

The etherification of furanyl alcohols created from biomass-derived glucose and fructose has been a flourishing area of research for production of alternative diesel additives. We have determined that the Brønsted acidic resin catalyst, Amberlyst-15, is highly active and selective for the etherification of furanyl alcohols by both ethanol and butanol. The mechanism and kinetics of this reaction were investigated using 5-methylfurfuryl alcohol (MFA) as a probe molecule. Etherification of MFA was found to be first order in both the concentrations of furanyl alcohol and the acid sites. The mechanism of MFA etherification also holds for the etherification of 2,5-bis(hydroxymethyl) furan (BHMF) and 5-(hydroxymethyl)furfural (HMF). In the case of HMF, we find that acetalization of HMF precedes etherification in alcohol solutions. The apparent activation energy of furanyl alcohol etherification in ethanol and butanol solutions ranged from 17.0 to 26.3 kcal/mol. Electron donation/withdrawal at the 2 or 5 position of the furan ring in addition to solvent polarity was discovered to have significant effects on the rate of furanyl alcohol etherification.

Amberlyst-15↗

Tailoring the Cooperative Acid-Base Effects in Silica-Supported Amine Catalysts: Applications in the Continuous Gas-Phase Self-Condensation of n -Butanal

A highly efficient solid-base organocatalyst for the gas-phase aldol self-condensation of n -butanal to 2-ethylhexenal was developed by grafting site-isolated amines on tailored silica surfaces. The catalytic activity depends largely on the nature of amine species, the surface concentration of amine and silanol groups, and the spatial separation between the silanol and amine groups. In situ FTIR measurements demonstrated that the formation of nucleophilic enamines leads to the enhanced catalytic activity of secondary amine catalysts, whereas the formation of imines (stable up to 473 K) leads to the low activity observed for silica-supported primary amines. Blocking the silanol groups on the silica support by silylation or cofeeding water into the reaction stream drastically decreased the reaction rates, demonstrating that weaker acidic silanol groups participate cooperatively with the amine groups to catalyze the condensation reaction. This work demonstrates that the spatial separation of the weakly acidic silanols and amines can be tuned by the controlled dehydration of the supporting silica and by varying the linker length of the amine organosilane precursor used to graft the amine to the support surface. A mechanism for aldol condensation was proposed and then analyzed by DFT calculations. DFT analysis of the reaction pathway suggested that the rate-limiting step in aldol condensation is carbon-carbon bond formation, which is consistent with the observed kinetics. The calculated apparent activation barrier agrees reasonably with that measured experimentally. Secondary amines come first: A solid-base organocatalyst achieved by grafting amines onto silica surfaces is applied to the gas-phase aldol self-condensation of n-butanal to 2-ethylhexenal. Silica-supported secondary amine catalysts demonstrate a much higher catalytic activity than the primary amine analogues, owing to the respective formation of enamines as shown by in situ FTIR analysis. The reaction pathway is analyzed by DFT calculations.

acidity↗

Selective Propene Oligomerization with Nickel(II)-Based Metal–Organic Frameworks

Two Ni 2+ -containing metal-organic frameworks, Ni 2 (dobdc) and Ni 2 (dobpdc), are shown to be active for the oligomerization of propene in the gas phase. The metal-organic frameworks exhibit activity comparable to Ni 2+ -exchanged aluminosilicates but maintain high selectivity for linear oligomers. Thus, these frameworks should enable the high yielding synthesis of linear propene oligomers for use in detergent and diesel fuel applications.

alkyls↗

Preparation and Characterization of High-Surface-Area Bi (1– x )/3 V 1– x Mo x O 4 Catalysts

We report the successful application of a templating approach employing ordered mesoporous carbon to the synthesis of BiVO 4 , Bi 2 Mo 3 O 12 , and Bi 0.85 V 0.55 Mo 0.45 O 4 and the performance of these materials as catalysts for the oxidation of propene to acrolein. Ordered mesoporous carbon templates were used to control the nucleation and growth of the mixed metal oxide crystals, allowing higher final surface areas to be obtained. The resulting materials were characterized by X-ray diffraction, Raman spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and BET surface area analysis. The surface area of the mixed metal oxide catalysts was found to depend on the type of mesoporous silica used to prepare the carbon template and on the conditions under which the carbon template was formed. Through an appropriate choice of template, the surface areas of the mixed metal oxides exceeded 15 m 2 /g. Catalytic testing revealed that materials produced via templating in ordered mesoporous carbon had per-gram activities that were up to 85 times higher than those produced by a conventional hydrothermal synthesis and exhibited stable catalytic activities over 24 h.

Nell, Alexandre↗

Discovering Ce-rich oxygen evolution catalysts, from high throughput screening to water electrolysis

In this paper, we report a new Ce-rich family of active oxygen evolution reaction (OER) catalysts composed of earth abundant elements, discovered using high-throughput methods. High resolution inkjet printing was used to produce 5456 discrete oxide compositions containing the elements nickel, iron, cobalt and cerium. The catalytic performance of each of these compositions was measured under conditions applicable to distributed solar fuels generation using a three-electrode scanning drop electrochemical cell. The catalytic activity and stability of representative compositions (Ni 0.5 Fe 0.3 Co 0.17 Ce 0.03 O x and Ni 0.3 Fe 0.07 Co 0.2 Ce 0.43 O x ) from 2 distinct regions were verified by resynthesizing these compositions on glassy carbon rods for electrochemical testing. The activity of the new Ce-rich catalysts was further verified using an unrelated synthetic method to electrodeposit a pseudo-ternary composition Ni 0.2 Co 0.3 Ce 0.5 O x , which produced a catalyst with 10 mA cm -2 oxygen evolution current at 310 mV overpotential. Finally, the unique Tafel behavior of these Ce-rich catalysts affords the opportunity for further improvement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of composition and metal particle size on ethane dehydrogenation over Pt x Sn 100- x /Mg(Al)O (70$\leqslant$ x $\leqslant$100)

The effects of composition and metal particle size of platinum catalysts on ethane dehydrogenation were investigated on Pt x Sn 100- x /Mg(Al)O (70 $\leqslant$ x $\leqslant$ 100) catalysts prepared with average particle sizes between ~2 and 7 nm. At high conversions, catalyst deactivation from coke formation was a strong function of particle size and Sn/Pt. Deactivation decreased significantly with decreasing particle size and increasing Sn addition. To understand the true initial activity of un-deactivated catalysts, further experiments were run at low residence time conditions to limit ethene formation. For a fixed average particle size, ethane TOF and the selectivity to ethene increased with increasing content of Sn in the PtSn particle. For Pt and Pt 3 Sn compositions, ethane TOF increased with increasing particle size, while the selectivity to ethene was not strongly affected. Finally, the observed effects of particle size and composition are attributed to a combination of geometric and electronic factors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogenation of butanal over silica-supported Shvo’s catalyst and its use for the gas-phase conversion of propene to butanol via tandem hydroformylation and hydrogenation

The objective of the present study was to develop a heterogeneous catalyst for the hydrogenation of butanal that could function in the presence of CO and propene and, hence, could be used in a tandem reactor to enable the gas-phase conversion of propene and synthesis gas to butanol. To this end, we investigated the activity of silica-supported Shvo's catalyst (Shvo/SiO 2 ) for the gas-phase hydrogenation of butanal. Experiments were performed to determine the kinetics of n- and iso-butanal hydrogenation. The apparent activation energies and the apparent partial pressure dependencies of n - and iso-butanal, H 2 , and CO on the rates of n- and iso-butanol formation were determined. A mechanism for butanal hydrogenation was proposed to rationalize the observed kinetics and some of the reaction intermediates were observed by in situ infrared and 31 P MAS NMR spectroscopy. It was found that Shvo/SiO 2 was inhibited by SX (SX = sulfoxanthphos) and CO, and is inactive for alkene hydrogenation. The tandem catalytic conversion of propene and synthesis gas to butanol was then carried out using a SX-Rh supported ionic liquid phase (SILP) catalyst to promote the hydroformylation of propene to butanal and Shvo/SiO 2 to promote the hydrogenation of butanal to butanol. The rate expressions describing the kinetics of each of the catalysts were then used to predict operating conditions required to achieve high conversion of propene to butanol. Under the most favorable conditions examined (H 2 /CO = 10), an overall yield of 13% to butanol was achieved with 15% propene conversion and 90% aldehyde conversion at a temperature of 413 K.

Butanal↗

Effects of Si/Al Ratio on the Distribution of Framework Al and on the Rates of Alkane Monomolecular Cracking and Dehydrogenation in H-MFI

For this study, the aim was to investigate the influence of Si/Al ratio on the locations of exchangeable cations in H-MFI and on the monomolecular cracking and dehydrogenation reactions of n -butane. On the basis of UV-visible spectroscopic analysis of Co(II) exchanged into MFI, it was inferred that the fraction of Co(II) (and, by extension, Brønsted protons) located at channel intersections relative to straight and sinusoidal channels increases with increasing Al content. Concurrently, turnover frequencies for all monomolecular reactions, and the selectivities to dehydrogenation versus cracking and to terminal cracking versus central cracking, generally increased. The changes in selectivity with Al content are consistent with the finding that the transition-state geometry for dehydrogenation is bulky and resembles a product state, and should therefore exhibit a stronger preference to occur at channel intersections relative to cracking. Increases in turnover frequencies are attributed partly to increases in intrinsic activation entropies that compensate for concurrent increases in intrinsic activation energies, most strongly for dehydrogenation and terminal cracking, resulting in increased selectivity to these reactions at higher Al content. This interpretation contrasts with the view that intrinsic activation barriers are constant. It is also observed that isobutene inhibits the rate of n-butane dehydrogenation. Theoretical calculations indicate that this effect originates from adsorption of isobutene at the channel intersections. Because cracking reaction rates are not affected by the presence of isobutene, this result suggests that the preference of dehydrogenation to occur at channel intersections is much stronger than the preference for cracking to occur at these locations.

activation energy↗

Propene Oligomerization using Alkali Metal- and Nickel-Exchanged Mesoporous Aluminosilicate Catalysts

A series of alkali metal- and nickel-exchanged Al-MCM-41 catalysts were prepared via aqueous ion exchange and then investigated for gas-phase oligomerization of propene at 453 K and near ambient pressures. All catalysts were active and produced oligomers with >98% selectivity. The highest activities per Ni 2+ cation were observed when the cations were highly dispersed as a consequence of either lowering the Ni loading for a fixed MCM-41 Si/Al ratio or by decreasing the concentration of exchangeable sites within the material by increasing the MCM-41 Si/Al ratio at a fixed Ni loading. The identity of the alkali metal cation had no significant effect on the catalytic activity or degree of dimer branching, except for the sample containing Cs + cations, where the decreased pore volume resulted in a lower catalyst activity and slightly more linear dimer products. Comparison of Ni-MCM-41 prepared with and without Na + cations showed that a higher yield of oligomers could be achieved when Na + cations are present because of partial removal of strong Brønsted acid sites. For the same reaction conditions, Ni-Na-MCM-41 was more than twice as active as smaller-pored Ni-Na-X zeolites, demonstrating that the activity of Ni 2+ cations increases with the increasing free volume near the site. This effect of free volume on the activity of Ni 2+ cations was further confirmed by comparing the activities of Ni-Na-X, Ni-Na-MCM-41, Ni-Na-MCM-48, and Ni-Na-SBA-15 with respect to pore size.

alkyls↗

The Influence of Functionals on Density Functional Theory Calculations of the Properties of Reducible Transition Metal Oxide Catalysts

Reducible transition metal oxides (RTMOs) comprise an important class of catalytic materials that are used for the selective oxidation and electro- and photochemical splitting of water, and as supports for metal nanoparticles. It is highly desirable to model the properties of these materials accurately using density functional theory (DFT) in order to understand how oxide structure and performance are related and to guide the search for materials exhibiting superior performance. Unfortunately, accurate description of the structural and electronic properties of RTMOs using DFT has proven particularly challenging. The M06-L density functional, which has been shown to be broadly accurate for calculations of gas phase clusters, has recently become available to researchers carrying out calculations in the solid state, but its performance in determining the properties RTMOs has been little investigated. The aim of this work was to assess the performance of the M06-L functional for describing the structural and electronic properties of a family of RTMOs: MoO 2 , MoO 3 , and Bi 2 Mo 3 O 12 . Lattice constants, band gaps, and densities of states calculated using the M06-L functional are compared to those obtained from DFT+U. We have also used the M06-L functional to determine the reaction barrier for propene activation over Bi 2 Mo 3 O 12 , the rate-limiting step in the oxidation of propene to acrolein. We find that while DFT calculations carried out with the M06-L functional are roughly five times more expensive computationally than those performed with DFT+U, the results obtained using the M06-L functional provide sensible results for all properties investigated, while avoiding the necessary trade-off between accurate electronic structure and accurate thermochemistry that occurs in DFT+U.

Getsoian, Andrew “Bean”↗

n-Butane dehydrogenation over Pt/Mg(In)(Al)O

The thermal dehydrogenation of butane to butene and hydrogen was explored over Pt nanoparticles supported on calcined hydrotalcite containing indium, Mg(In)(Al)O. Previous work has shown that upon reduction in H 2 at temperatures above 673 K, bimetallic Pt-In particles of are formed, as evidenced by XANES and EXAFS. The performance of Pt/Mg(In)(Al)O for butane dehydrogenation was found to be highly dependent on the bulk In/Pt ratio. The optimal ratio was found to be between 0.33 and 0.88, yielding >95% selectivity to butenes. Hydrogen co-fed with butane was shown to suppress coke formation and catalyst deactivation, a ratio of H 2 /C 4 H 10 = 2.5 providing the best catalytic performance. Regeneration of catalysts after removal of accumulated carbon and reduction in H 2 restored the original catalyst activity and selectivity. Butane dehydrogenation above 803 K resulted in higher formation of butadiene, a known precursor to coke. No evidence for butane cracking was found to occur on Pt/Mg(In)(Al)O due to moderately basic nature of the support. This study shows that Pt/Mg(In)(Al)O exhibits superior performance for butane dehydrogenation compared to supported Pt catalysts promoted with Sn, Ge, Pb, and In prepared by successive incipient wetness impregnation of the Pt and promoter precursors.

Butane dehydrogenation↗

Subnanometer-sized Pt/Sn alloy cluster catalysts for the dehydrogenation of linear alkanes

The reaction pathways for the dehydrogenation of ethane, propane, and butane, over Pt are analyzed using density functional theory (DFT). Pt nanoparticles are represented by a tetrahedral Pt 4 cluster. The objectives of this work were to establish which step is rate limiting and which one controls the selectivity for forming alkenes as opposed to causing further dehydrogenation of adsorbed alkenes to produce precursors responsible for catalyst deactivation due to coking. To continue, further objectives of this work are to identify the role of adsorbed hydrogen, derived from H 2 fed together with the alkane, on the reaction pathway, and the role of replacing one of the four Pt atoms by a Sn atom. A comparison of Gibbs free energies shows that in all cases the rate-determining step is cleavage of a C-H bond upon alkane adsorption. The selectivity to alkene formation versus precursors to coking is dictated by the relative magnitudes of the activation energies for alkene desorption and dehydrogenation of the adsorbed alkene. The presence of an adsorbed H atom on the cluster facilitates alkene desorption relative to dehydrogenation of the adsorbed alkene. Substitution of a Sn atom in the cluster to produce a Pt 3 Sn cluster leads to a downward shift of the potential energy surface for the reaction and causes an increase of the activity of the catalyst as suggested by recent experiments due to the lower net activation barrier for the rate limiting step. However, the introduction of Sn does not alter the relative activation barriers for gas-phase alkene formation versus loss of hydrogen from the adsorbed alkene, the process leading to the formation of coke precursors.

Hauser, Andreas W.↗

Two-Step Delignification of Miscanthus To Enhance Enzymatic Hydrolysis: Aqueous Ammonia Followed by Sodium Hydroxide and Oxidants

Pretreatment of miscanthus is essential for enzymatic production of sugars to yield bioethanol. A two-step process using 10 wt % aqueous ammonia in the first step is followed by 1 wt % sodium hydroxide (with or without oxygen or 1 wt % hydrogen peroxide) in the second step. The first step retains about 90% of the cellulose and about 67% of the hemicellulose in the solid while removing about 62% of the lignin. Both steps together achieve 83-90% delignification. Subsequent enzymatic conversion to fermentable sugars is close to 90% after 96 h. While an oxidant does not significantly increase delignification, it has a favorable effect on saccharification of the recovered solid. Infrared spectroscopy, X-ray diffraction, and two-dimensional nuclear magnetic resonance spectroscopy provide data concerning the chemical composition of the recovered solid. Inclusion of an oxidant to the pretreatment breaks β-O-4'- linked aryl ether bonds of the remaining lignin in the recovered solid.

Liu, Zhongguo↗

On the chemical state of Co oxide electrocatalysts during alkaline water splitting

Resonant inelastic X-ray scattering and high-resolution X-ray absorption spectroscopy were used to identify the chemical state of a Co electrocatalyst in situ during the oxygen evolution reaction. After anodic electrodeposition onto Au(111) from a Co 2+ -containing electrolyte, the chemical environment of Co can be identified to be almost identical to CoOOH. With increasing potentials, a subtle increase of the Co oxidation state is observed, indicating a non-stoichiometric composition of the working OER catalyst containing a small fraction of Co 4+ sites. In order to confirm this interpretation, we used density functional theory with a Hubbard- U correction approach to compute X-ray absorption spectra of model compounds, which agree well with the experimental spectra. Finally, in situ monitoring of catalyst local structure and bonding is essential in the development of structure-activity relationships that can guide the discovery of efficient and earth abundant water splitting catalysts.

Friebel, Daniel↗