'DCIEDD with CARE' - Building an Autonomous Ecosystem for the Discovery and Optimization of Metal Nanoparticle Inks
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Bell, Nelson Simmons.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Abstract not provided.
Abstract not provided.
Abstract not provided.
This report documents research into the fabrication of Lithium Manganese Oxide (Spinel) (LMO) cathode material in the form of fibrous mats, the degradation process of this material in a battery electrolyte, the formation of core-shell coated fibers and the electrochemical properties of the active cathode core fiber. In practice, LMO experiences several degradation mechanisms ranging from capacity fading, the Jahn-Teller distortion phenomenon leading to dissolution in the electrolyte phase, and the formation of surface films by degradation of the electrolyte, and/or phase transitions at the surface to form Mn 2 O 3 . Density Functional Theory (DFT) was applied to model from first principles the interactions between the electrolyte and the surface leading to Mn ion dissolution. Thermodynamic values of solvation energy were calculated and related to the applied potential on the material during electrochemical cycling. Direct in situ observation of the degradation process was conducted on fiber structures using AFM and coin cell measurements, showing the rapid formation of theorized surface films. This provides the first direct evidence of processes occurring at the interface, such as dissolution of the active material, facet development, decomposition of the electrolyte to form a surface electrolyte interface (SEI) layer, or the formation of Li alcoxides/carboxylates. Methods for fabricating fiber structures of LMO were researched using two techniques; electrospinning and forcespinning. Chemical precursors were evaluated and optimized to lead to polycrystalline, hollow fibers of LMO, as well as tetragonal zirconia fiber mats. Sol-gel chemistries for the synthesis of LMO and zirconia have been implemented to generate these fiber morphologies. Core-shell methods were attempted using both techniques, proving partial success and insight into the physics of coherent core-shell fibers. The knowledge developed in this program has increased understanding of the degradation mechanisms of the active energy storage material, and aided development of a protective interface which resists these processes while permitting rapid Li + transport, good e - conductivity, a stable interface, and prevention of the formation of a solid-electrolyte interphase (SEI) layer.
The design of materials that respond to changing environmental conditions is a leading-edge materials area that will impact fundamental scientific and mission areas of Sandia. For this project, the responsive materials of interest were nanocomposites. Nanocomposites have come to the forefront of study since very low load levels (< 5 %) of the filler can have a dramatic impact on the matrices final properties. This is due to the increased interfacial interaction of the 1D nanomaterials with the polymeric matrix. As we develop these Responsive Nanocomposites we expect to impact a wide number of research areas, including energy security and weapons. For example, polymeric materials in gasket seals would adapt to differing temperatures and humidity such that they maintain an optimal degree of functionality regardless of climate variations.
Magnesium batteries are alternatives to the use of lithium ion and nickel metal hydride secondary batteries due to magnesium's abundance, safety of operation, and lower toxicity of disposal. The divalency of the magnesium ion and its chemistry poses some difficulties for its general and industrial use. This work developed a continuous and fibrous nanoscale network of the cathode material through the use of electrospinning with the goal of enhancing performance and reactivity of the battery. The system was characterized and preliminary tests were performed on the constructed battery cells. We were successful in building and testing a series of electrochemical systems that demonstrated good cyclability maintaining 60-70% of discharge capacity after more than 50 charge-discharge cycles.
Development of high energy density dielectrics with low temperature coefficients of capacitance that are systems integrable are needed for extreme environment, defense and automotive applications. The synthesis of high purity chemically prepared Ca(Zr,Ti)O3 powders is described and has resulted in the lowering of conventional firing temperatures by over 100 C. Direct write aerosol spray deposition techniques have been used to fabricate high quality single layer and multilayer capacitors from these powders. The dielectric constants of the direct write capacitors are equivalent to those of fired bulk ceramics. Our presentation emphasizes the synthesis, phase evolution and microstructure development that has resulted in dielectrics with energy densities in excess of 3 J/cm3 with less than 1% change in dielectric constant over a 200 C temperature range.
Silver nanomaterials have significant application resulting from their optical properties related to surface enhanced Raman spectroscopy, high electrical conductivity, and anti-microbial impact. A 'green chemistry' synthetic approach for silver nanomaterials minimizes the environmental impact of silver synthesis, as well as lowers the toxicity of the reactive agents. Biopolymers have long been used for stabilization of silver nanomaterials during synthesis, and include gum Arabic, heparin, and common starch. Maltodextrin is a processed derivative of starch with lower molecular weight and an increase in the number of reactive reducing aldehyde groups, and serves as a suitable single reactant for the formation of metallic silver. Silver nanomaterials can be formed under either a thermal route at neutral pH in water or by reaction at room temperature under more alkaline conditions. Deposited silver materials are formed on substrates from near neutral pH solutions at low temperatures near 50 C. Experimental conditions based on material concentrations, pH and reaction time are investigated for development of deposited films. Deposit morphology and optical properties are characterized using SEM and UV-vis techniques. Silver nanoparticles are generated under alkaline conditions by a dissolution-reduction method from precipitated silver (II) oxide. Synthesis conditions were explored for the rapid development of stable silver nanoparticle dispersions. UV-vis absorption spectra, powder X-ray diffraction (PXRD), dynamic light scattering (DLS), and transmission electron microscopy (TEM) techniques were used to characterize the nanoparticle formation kinetics and the influence of reaction conditions. The adsorbed content of the maltodextrin was characterized using thermogravimetric analysis (TGA).
No abstract prepared.
Abstract not provided.
In an aim to develop photo-responsive composites, the UV photo-reduction of aqueous titanium oxide nanoparticle-graphene oxide (TiO{sub 2}-GO) dispersions (Lambert et al. J Phys. Chem. 2010 113 (46), 19812-19823) was undertaken. Photo-reduction led to the formation of a black precipitate as well as a soluble portion, comprised of titanium oxide nanoparticle-reduced graphene oxide (TiO{sub 2}-RGO). When allowed to slowly evaporate, self assembled titanium oxide nanoparticle-graphene oxide (SA-TiO{sub 2}-RGO) films formed at the air-liquid interface of the solution. The thickness of SARGO-TiO{sub 2} films range from {approx}30-100 nm when deposited on substrates, and appear to be comprised of a mosaic assembly of graphene nanosheets and TiO{sub 2}, as observed by scanning electron microscopy. Raman spectroscopy and X-ray photoelectron spectroscopy indicate that the graphene oxide is only partially reduced in the SA-TiO{sub 2}-RGO material. These films were also deposited onto inter-digitated electrodes and their photo-responsive behavior was examined. UV-exposure lead to a {approx} 200 kOhm decrease in resistance across the device, resulting in a cathodically biased film. The cathodic bias of the films was utilized for the subsequent reduction of Ag(NO{sub 3}) into silver (Ag) nanoparticles, forming a ternary Ag-(SA-RGO-TiO{sub 2}) composite. Various aspects of the self assembled films, their photoconductive properties as well as potential applications will be presented.
Abstract not provided.
No abstract prepared.
Lack of robust manufacturing capabilities have limited our ability to make tailored materials with useful optical and thermal properties. For example, traditional methods such as spontaneous self-assembly of spheres cannot generate the complex structures required to produce a full bandgap photonic crystals. The goal of this work was to develop and demonstrate novel methods of directed self-assembly of nanomaterials using optical and electric fields. To achieve this aim, our work employed laser tweezers, a technology that enables non-invasive optical manipulation of particles, from glass microspheres to gold nanoparticles. Laser tweezers were used to create ordered materials with either complex crystal structures or using aspherical building blocks.