Search NASA⌕ Search

Engineering topics

Berg, John C

Publications and source records attributed to Berg, John C.

Electroacoustics of Particles Dispersed in Polymer Gel

This study examines the acoustic electrophoresis of particles dispersed in polymer hydrogels, with the particle size either less than or greater than the gel mesh size. When the particles are smaller than the gel mesh size, their acoustic vibration is resisted by only the background water medium, and the measured dynamic electrophoretic mobility, μd (obtained in terms of colloid vibration current, CVI), is the same as in water. For the case of particles larger than the gel mesh size, μd is decreased due to trapping, and the net decrease depends on the viscoelastic properties of the gel. The gel mesh size was varied by varying its crosslink density, the latter being characterized as the storage modulus, G’. The dependence of mobility on G’, for systems of a given particle size, and on particle size, for gels of a given G’, are investigated. The measured mobility remains constant as G’ is increased (i.e., mesh size is decreased) up to a value of approximately 300 Pa, beyond which it decreases. In the second set of measurements, the trapped particle size was increased in a gel medium of constant mesh size, with G’ approximately 100 Pa. In this case, the measured μd is found to be effectively constant over the particle size range studied (14-120 nm), i.e., it is independent of the degree of trapping as expressed by the ratio of the particle size to the mesh size.

36 MATERIALS SCIENCE↗

Electrophoretic Mobility of Poly(acrylic acid)-Coated Alumina Particles

The effect of poly (acrylic acid) (PAA) adsorption on the electrokinetic behavior of alumina dispersions under high pH conditions was investigated as a function of polymer concentration and molecular weight as well as the presence, concentration and ion type of background electrolyte. Systems of this type are relevant to nuclear waste treatment, in which PAA is known to be an effective rheology modifier. The presence of all but the lowest molecular weight PAA studied (1800) led to decreases in dynamic electrophoretic mobility at low polymer concentrations, attributable to bridging flocculation, as verified by measurements of particle size distribution. Bridging effects increased with polymer molecular weight, and decreased with polymer concentration. Increases in background electrolyte concentration enhanced dynamic electrophoretic mobility as the polymer layers were compressed and bridging was reduced. Such enhancements were reduced as the cation was changed from Na+ to K+ to Cs+.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Physical Properties of Hanford Transuranic Waste

The research described herein was undertaken to provide needed physical property descriptions of the Hanford transuranic tank sludges under conditions that might exist during retrieval, treatment, packaging and transportation for disposal. The work addressed the development of a fundamental understanding of the types of systems represented by these sludge suspensions through correlation of the macroscopic rheological properties with particle interactions occurring at the colloidal scale in the various liquid media. The results of the work have advanced existing understanding of the sedimentation and aggregation properties of complex colloidal suspensions. Bench scale models were investigated with respect to their structural, colloidal and rheological properties that should be useful for the development and optimization of techniques to process the wastes at various DOE sites.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impact of Rheological Modifiers on Various Slurries Supporting DOE Waste Processing

Controlling the stability and subsequent rheological properties of slurries has been an important but challenging issue in nuclear waste treatment, one that previous research has yet to sufficiently address. At the Hanford and Savannah River sites, operation of the waste treatment facilities at increased solids loading reduces the evaporative load on the melter systems and thereby increases waste processing rates. However, at these higher solids loadings, increased slurry rheology becomes a significant processing issue. The current study evaluates the use of several rheological modifiers to alleviate increased slurry rheology at high waste solids concentrations. Rheological modifiers change particle interactions in slurry. For colloidal slurries, modifiers mainly alter the electrostatic and steric interactions between particles, leading to a change in slurry rheology. Weak organic acid type rheological modifiers strengthen electrostatic repulsion whereas nonionic/polymer surfactant type rheological modifiers introduce a steric repulsion. We investigated various rheological modifiers using high level waste (HLW) nuclear waste simulants characterized typically by high ionic strength and a wide range of pH from 4 to 13. Using rheological analysis, it was found that citric acid and polyacrylic acid would be good rheological modifiers for the HLW simulants tested, effectively reducing slurry rheology by 40% or more. Physical insights into the mechanisms driving stabilization by these rheological modifiers will be discussed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Rheological Modifiers and Wetting Agents

DOE tank waste treatment plants, the Waste Treatment Plant (WTP) at Hanford and Defense Waste Processing Facility (DWPF) at Savannah River, are designed to vitrify radioactive waste slurries for long-term storage. Plant throughput is currently limited by the waste solids loading. To increase waste throughput rates in the plant, an increase in the slurry solids concentration (or conversely, a reduction in the mass fraction of water in the waste) is being considered. However, the present mechanical designs used to mix and transport theses slurries are limited by the rheological properties. This reduction of water results in an increase in rheological properties that challenge plant design and performance. To support this increase in throughput, there is a need to reduce the rheological properties of these waste slurries. The objective of this project is to determine a small set of well-performing and commercially available rheological modifiers that allow control rheological properties of various simulated and actual waste slurries and to understand the physical mechanisms that govern modification of waste rheology. It is estimated that processing at a higher solids concentration will reduce the operating life of these plants by one year for both facilities, representing roughly $1B in lifecycle cost savings. In addition, this research is potentially important to sustainable operations of both WTP and DWPF

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗