Search NASA⌕ Search

Engineering topics

Bernardin, John David

Publications and source records attributed to Bernardin, John David.

Assessment of Additive Manufacturing of Particle Accelerator [Slides]

Metal additive manufacturing of copper components has been commercialized on multiple printing modalities; including Bound Metal Deposition (BMD), Laser Powder Bed Fusion (LPBF), and Electron Beam Melting (EBM). BMD was selected at the primary printing modality for this TED because of the availability of the Markforged Metal X machine within the LANL E-2 AM research lab. Linear accelerator (LINAC) structures are similarly demonstrated technology. Accelerator structures are typically made of high purity oxygen-free electronic copper owing to the material’s high electrical and thermal conductivity. Conventionally machined and brazed, welded, or bolted designs are difficult to manufacture and require long lead times.

36 MATERIALS SCIENCE↗

Additively Manufactured Tamper Evident Container

Los Alamos National Laboratory has developed a revolutionary and reliable new tamper evident container (TEC) to monitor and protect the health, security, and distribution of high-value assets, technological advancements, products, materials and more that are critical to the operations of businesses and government organizations. Unlike traditional tamper evident seals, the entire TEC serves as a seal, with encrypted on-board electronics able to continuously monitor and log structural health data including but not limited to force, temperature, pressure, humidity, orientation, radiation, acceleration, or vibration as needed. Analog and encrypted digital boards safely stored inside the TEC permanently record the complete integrity history of the protected items and have the ability to alert the TEC owners or take immediate defensive actions should a disruptive or tamper event take place.

36 MATERIALS SCIENCE↗

Key Pandemic Response R&D Contributions by Los Alamos National Laboratory

New research goals, mitigation successes, and beneficial collaborations burgeoned from the early critical days of 2020 when LANL (Los Alamos National Laboratory) pivoted to help respond to the pandemic. By applying its considerable capabilities in the fields of science, technology, and engineering (STE), LANL responded to the coronavirus infectious disease (COVID-19) pandemic. This report documents representative examples of that response. Through significant investments in COVID-19 mitigations and ongoing research and development (R&D), important advancements were made to address the pandemic that not only benefited the global population affected by the pandemic, but also protected our staff and collaborators as we executed our Lab’s mission.

59 BASIC BIOLOGICAL SCIENCES↗

Low-Cost, Accessible Vaccine Cooler Options

In response to cold chain management requirements for COVID-19 vaccines, Los Alamos National Laboratory has investigated, built, and demonstrated viability for different cryogenic storage options. With ease-of-access and affordability in mind, these cooler units have been built using commercial off-the-shelf (COTS) components. The team was also able to design a testing method for evaluating the performance of the different vaccine cooler options as part of the Technology Evaluation and Demonstration program. The tested cooler units demonstrated compatibility with either dry ice or liquid nitrogen as the cryogen, along with several commercial solvents. This compatibility demonstration would potentially offer sufficient flexibility for temperature control continuity. Next steps are to investigate industry interest in supporting field testing of the cooler units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Additively Manufactured Tamper Evident Container (TEC)

Researchers at Los Alamos National Laboratory have developed a tamper evident container (TEC) to secure a broad variety of items from adversarial disclosure and espionage accidents. The new technology uses additive-manufacturing (AM) techniques for the concurrent creation of a container and arbitrarily complex-shaped three-dimensional tamper-sensitive features within its walls that authenticate the package. Analog and encrypted digital boards safely stored inside the TEC permanently record the complete security history of the protected items. Los Alamos is seeking commercial partners interested in further development and engineering prototype work.

42 ENGINEERING↗

Markforged Continuous Fiber Composite Material Testing

Continuous fiber composite 3D printing promises to greatly expand the design space of polymer additive manufacturing (AM). A series of mechanical tests were performed to attempt to fully characterize the composite materials built from feedstock provided by the Markforged company. These tests included tensile, compression, Charpy impact, three point bending, coefficient of thermal expansion, and calorimetry tests. Specimens were prepared on the Mark Two 3D printer at LANL during the spring and summer of 2019. These samples were then shipped to New Mexico Institute of Mining and Technology’s Thermo-Mechanical Lab for testing during the summer and fall of 2019. Test data are reported and analyzed for each of the tests.

36 MATERIALS SCIENCE↗

Emissivity Measurements of Additively Manufactured Materials

The emissivity of common 3D printing materials such as ABS and PLA were measured using a reflectivity meter and have the measured value of approximately 0.92. Adding a conductive material to the filament appears to cause a decrease in the emissivity of the surface. The angular dependence of the emissivity and the apparent temperature was measured using a FLIR infrared camera showing that the emissivity does not change much for shallow angles less than 40 angular degrees, and drops off dramatically after 70 angular degrees.

36 MATERIALS SCIENCE↗

Extensions to Dynamic System Simulation of Fissile Solution Systems

Previous reports have documented the results of applying dynamic system simulation (DSS) techniques to model a variety of fissile solution systems. The SUPO (Super Power) aqueous homogeneous reactor (AHR) was chosen as the benchmark for comparison of model results to experimental data for steadystate operation.1 Subsequently, DSS was applied to additional AHR to verify results obtained for SUPO and extend modeling to prompt critical excursions, ramp reactivity insertions of various magnitudes and rate, and boiling operations in SILENE and KEWB (Kinetic Experiment Water Boiler).2 Additional models for pressurized cores (HRE: Homogeneous Reactor Experiment), annular core geometries, and accelerator-driven subcritical systems (ADAHR) were developed and results reported.3 The focus of each of these models is core dynamics; neutron kinetics, thermal hydraulics, radiolytic gas generation and transport are coupled to examine the time-based evolution of these systems from start-up through transition to steady-state. A common characteristic of these models is the assumption that (a) core cooling system inlet temperature and flow and (b) plenum gas inlet pressure and flow are held constant; no external (to core) component operations that may result in dynamic change to these parameters are considered. This report discusses extension of models to include explicit reference to cooling structures and radiolytic gas handling. The accelerator-driven subcritical generic system model described in References 3 and 4 is used as a basis for this extension.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗