Engineering topics
Publications and source records attributed to Berrier, B. L..
The paper reviews the objectives and some of the accomplishments of a number of programs to develop nonaxisymmetric nozzle technology for future tactical aircraft applications. Specific existing fighter aircraft model tests and preliminary studies are discussed which are designed to generate installed nozzle data, including the effects of thrust vectoring and reversal.
The effect of empennage interference on the drag characteristics of a model with a single engine fighter aft end with convergent-divergent nozzles was studied. The dry and maximum afterburning nozzle power settings were investigated. A high pressure air system was used to provide jet total pressure ratios up to 20.0. In an attempt to quantify and reduce adverse empennage interference and decrease aft-end drag, several empennage arrangements (variable tail surface location), contour bump configurations, and locally contoured afterbodies were investigated. The results of the investigation indicate that empennage interference effects can be significant at transonic and supersonic speeds. The most effective means of reducing adverse empennage interference is the proper relocation of individual tail surfaces. The aft or conventional empennage arrangement produced the highest aft-end drag at all conditions investigated.
A brief review has been made of the propulsion integration features which may impact the design of a supersonic cruise fighter type aircraft. The data used for this study were obtained from several investigations conducted in the Langley 16-foot transonic and 4 by 4 foot supersonic pressure wind tunnels. Results of this study show: (1) that for conventional nozzle installations, contradictory design guidelines exist between subsonic and supersonic flight condition, (2) that substantial drag penalties can be incurred by use of dry power nozzles during supersonic cruise; and (3) that a new and unique concept, the nonaxisymmetric nozzle, offers the potential for solving many of the current propulsion installation problems.
An investigation has been conducted in the Langley 16-foot transonic tunnel to determine the effects of empennage surfaces on single-engine afterbody and nozzle drag at Mach numbers up to 1.20. Empennage interference drag was obtained by using experimental values of afterbody/nozzle drag and theoretical values of empennage drag. Three methods for minimizing adverse empennage interference effects were investigated. Results show that empennage interference effects were always detrimental but could be reduced by proper location of tail surfaces. Afterbody contouring and addition of 'contour' bumps were generally ineffective in reducing aft-end drag for Mach numbers less than 0.95.
Twin-jet afterbody models were investigated by using two balances to measure separately the thrust minus total axial force and the afterbody drag at Mach numbers from 0 to 1.3. Angle of attack was varied from minus 2 deg to 8.5 deg. Translating shroud cone plug nozzles were tested at dry-power and maximum-afterburning-power settings with a high-pressure air system used to provide jet total-pressure ratios up to 9.0. Two nozzle lateral spacings were studied by using afterbodies with several interfairing shapes. The close- and wide-spaced afterbodies had identical cross-sectional area distributions when similar interfairings were installed on each. The results show that the highest overall performance was obtained with the close-spaced afterbody and basic interfairings. Increasing angle of attack decreased performance for all configurations and conditions investigated.
Twin-jet afterbody models were investigated by using two balances to measure separately the thrust minus total drag and the afterbody drag at Mach numbers of 0.0 and 0.50 to 2.20 for a constant angle of attack of 0. Translating shroud cone plug nozzles were tested at dry and maximum afterburning power settings with a high-pressure air system used to provide jet total-pressure ratios up to 20.0. Two nozzle lateral spacings were studied by using afterbodies with several interfairing shapes. The close- and wide-spaced afterbodies had identical cross-sectional area distributions when similar interfairings were installed on each. Nozzle cant angles of -5, 0, and 5 degrees were investigated. The results show that the highest overall performance was generally obtained with the close-spaced afterbody, basic interfairings (no base), and uncanted nozzles.
Effect of plug base contour on performance of fully truncated plug nozzle with translating shroud
Jet velocity and axial location of nozzle exit on performance of twin-jet afterbody model
Plug and shroud geometry variables on plug nozzle performance at transonic speeds
Effects of simulated jet exhaust flow on transonic aerodynamic characteristics of Apollo launch escape vehicle models
No abstract available
Off-design performance characteristics of two isentropic plug nozzles designed for pressure ratio of 16.5