Engineering topics

Bershader, Daniel

Publications and source records attributed to Bershader, Daniel.

8 records

NASA NTRS1996

Atomic Resonance Radiation Energetics Investigation as a Diagnostic Method for Non-Equilibrium Hypervelocity Flows

Absorption measurements with a tunable vacuum ultraviolet light source have been proposed as a concentration diagnostic for atomic oxygen, and the viability of this technique is assessed in light of recent measurements. The instrumentation, as well as initial calibration measurements, have been reported previously. We report here additional calibration measurements performed to study the resonance broadening line shape for atomic oxygen. The application of this diagnostic is evaluated by considering the range of suitable test conditions and requirements, and by identifying issues that remain to be addressed.

Meyer, Scott A.↗

NASA NTRS1994

Head-on parallel blade-vortex interaction

An experimental and computational study was carried out to investigate the parallel head-on blade-vortex interaction (BVI) and its noise generation mechanism. A shock tube, with an enlarged test section, was used to generate a compressible starting vortex which interacted with a target airfoil. The dual-pulsed holographic interferometry (DPHI) technique and airfoil surface pressure measurements were employed to obtain quantitative flow data during the BVI. A thin-layer Navier-Stokes code (BV12D), with a high-order upwind-biased scheme and a multizonal grid, was also used to simulate numerically the phenomena occurring in the head-on BVI. The detailed structure of a convecting vortex was studied through independent measurements of density and pressure distributions across the vortex center. Results indicate that, in a strong head-on BVI, the opposite pressure peaks are generated on both sides of the leading edge as the vortex approaches. Then, as soon as the vortex passes by the leading edge, the high-pressure peak suddenly moves toward the low-peak-reducing in magnitude as it moves--simultaneously giving rise to the initial sound wave. In both experiment and computation, it is shown that the viscous effect plays a significant role in head-on BVIs.

Lee, Soogab↗

NASA NTRS1993

Raman scattering measurements of vibrational and rotational distributions in expanding nitrogen

Vibrational and rotational population distributions in expanding nitrogen in the supersonic nozzle of a reflected shock tunnel were investigated using spontaneous Raman scattering spectroscopy. The experimental data are compared with two multitemperature nonequilibrium calculations, one based on the Landau-Teller model for vibrational relaxation, the other on the solution of the vibrational master equations. Good agreement was found between both the Landau-Teller and the master equation solutions for the vibrational energy mode, but the experimentally inferred rotational temperatures were found to be systematically low, due to collisional narrowing. The dramatic increase in vibrational relaxation rates for a cooling flowfield reported in most previous studies was not reproduced by the present experiments.

Gillespie, Walter D.↗

NASA NTRS1991

An experimental and computational study of 2-D blade-vortex interaction

An experimental and computational study is carried out to investigate the dominant physical factors of 2D parallel blade-vortex interaction (BVI) and its noise generation. A shock tube was used to generate a starting vortex which interacted with a target airfoil. Double-exposed holographic interferometry and airfoil surface pressure measurements were employed to obtain quantitative data during the BVI. As a numerical approach, thin-layer Navier-Stokes code, with a multizonal grid, was also used to resolve the phenomena occuring in the BVI, especially in the head-on collision case.

Lee, Soogab↗

NASA NTRS1990

Further Studies Of Hot-Wire Anemometry

Report discusses factors affecting readings of hot-wire anemometer in turbulent supersonic boundary layer. Represents extension of work described in "Hot-Wire Anemometry Versus Laser-Induced Fluorescence" (ARC-11802). Presents theoretical analysis of responses of hot-wire probe to changes in flow; also compares measurements by hot-wire probe with measurements of same flows by laser-induced fluorescence (LIF).

Mckenzie, Robert↗

NASA NTRS1989

Accuracy Of Hot-Wire Anemometry In Supersonic Turbulence

Sensitivity of hot-wire probe compared to laser-induced-florescence measurements. Report discusses factors affecting readings of hot-wire anemometer in turbulent supersonic boundary layer. Presents theoretical analysis of responses of hot-wire probe to changes in flow; also compares measurements by hot-wire probe with measurements of same flows by laser-induced fluorescence (LIF). Because LIF provides spatially and temporally resolved data on temperature, density, and pressure, provides independent means to determine responses of hot-wire anemometers to these quantities.

Logan, Pamela↗

NASA NTRS1988

Shock tube investigation of dynamic response of pressure transducers for validation of rotor performance measurements

For some time now, NASA has had a program under way to aid in the validation of rotor performance and acoustics codes associated with the UH-60 rotary-wing aircraft; and to correlate results of such studies with those obtained from investigations of other selected aircraft rotor performance. A central feature of these studies concerns the dynamic measurement of surface pressure at various locations up to frequencies of 25 KHz. For this purpose, fast-response gauges of the Kulite type are employed. The latter need to be buried in the rotor; they record surface pressures which are transmitted by a pipette connected to the gauge. The other end of the pipette is cut flush with the surface. In certain locations, the pipette configuration includes a rather sharp right-angle bend. The natural question has arisen in this connection: In what way are the pipettes modifying the signals received at the rotor surface and subsequently transmitted to the sensitive Kulite transducer element. The basic details and results of the program performed and recently completed in the High Pressure Shock Tube Laboratory of the Department of Aeronautics and Astronautics at Stanford University are given.

Bershader, Daniel↗

NASA NTRS1988

Hot-wire accuracy in supersonic turbulence from comparisons with laser-induced fluorescence

A hot-wire anemometer and a new, nonintrusive, laser-induced fluorescence (LIF) technique are used to survey a turbulent boundary layer in a supersonic channel flow at Mach no. 2.06. The purpose is to test the accuracy of using the hot wire to measure the fluctuation amplitudes of static temperature and density in a compressible turbulent flow by comparing the results with independent and direct LIF measurements. Several methods of hot-wire calibration and analysis are applied. With each method, the hot-wire response can be related primarily to fluctuations of mass flux and total temperature, from which fluctuations of static temperature and density are calculated. However, these calculations are shown to be valid only if the fluctuations in static pressure are negligible. The acquisition and the analysis of the hot-wire data are often simplified further by neglecting the effects of fluctuations in total temperature. Comparisons of the fluctuation amplitudes of temperature and density obtained by hot-wire and LIF measurements demonstrate that such assumptions might not always be warranted, even in apparently simple flows.

Logan, Pamela↗