Search NASA⌕ Search

Engineering topics

Bertin, J. J.

Publications and source records attributed to Bertin, J. J..

35 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Analysis of a two-dimensional type 6 shock-interference pattern using a perfect-gas code and a real-gas code

Numerical codes were developed to calculate the two dimensional flow field which results when supersonic flow encounters double wedge configurations whose angles are such that a type 4 pattern occurs. The flow field model included the shock interaction phenomena for a delta wing orbiter. Two numerical codes were developed, one which used the perfect gas relations and a second which incorporated a Mollier table to define equilibrium air properties. The two codes were used to generate theoretical surface pressure and heat transfer distributions for velocities from 3,821 feet per second to an entry condition of 25,000 feet per second.

Bertin, J. J.↗
NASA NTRS1973

Effect of geometry on the nose-region flow-field of shuttle entry-configurations

In order to determine the convective heat-transfer distribution for the nose region of the space shuttle entry configurations, a three-dimensional flow-field is described which may include extensive regions of separated flow. Because of the complexity of the flow field for the nose region, experimental data are needed to define the relation between the nose geometry and the resultant flow field. According to theoretical solutions of the three-dimensional boundary layer, the boundary layer separates from the leeward generator of a blunted cone at an alpha equal to the cone half-angle. Separation results from the transverse pressure gradient, i.e., the velocity derivative due to crossflow. The boundary layer limiting streamlines converge toward the singular point of sep aration. The separated region is bounded by an ordinary line of separation.

Bertin, J. J.↗
NASA NTRS1973

The effect of nose geometry on the aerothermodynamic environment of shuttle entry configurations

The effect was studied of nose geometry on the transition criteria for the windward boundary layer, on the extent of separation, on the heat transfer perturbation due to the canopy, and on the surface pressure and the heat transfer in the separated region. The data for each of these problems is analyzed. A literature review that concentrates on separation and the leeward flow-field is presented.

Bertin, J. J.↗
NASA NTRS1972

On the numerical solution of two-dimensional, laminar compressible flows with imbedded shock waves.

The complete, time-dependent Navier-Stokes equations are expressed in conservation form and solved by employing an explicit finite difference numerical technique which incorporates artificial viscosity terms of the form first suggested by Rusanov for numerical stability in the vicinity of shock waves. Surface boundary conditions are developed in a consistent and unique manner through the use of a physically oriented extrapolation procedure. From numerical experimentation an extended range for the explicit stability parameter is established. Also employed is an additional convergence parameter which relates incremental spatial steps. Convergence of the transient solution to a steady state flow was obtained after 400 to 500 time steps.

Goodrich, W. D.↗
NASA NTRS1972

Hypersonic shock-interaction phenomena applicable to space shuttle configurations

The convective heat transfer distribution for space shuttle configurations is discussed. The viscous/inviscid interactions associated with the complex three dimensional flow fields are examined. Two basic conditions are considered as follows: (1) models consisting of basic elemental combinations and (2) models of specific flight vehicles. The test facilities and test programs used to obtain data on the fuselage flow field and the wing flow field are described.

Bertin, J. J.↗
NASA NTRS1972

Flow field measurements for space-shuttle-related cylindrical configurations in hypersonic streams.

Use of surface pressures, heat-transfer rates, and flow-visualization photographs to define the flowfields for simulated infinite cylinders. Four cylindrical cross sections were studied in the experimental program, which was conducted at free-stream Mach numbers of 5 to 15, free-stream unit Reynolds numbers from 2 to 20 million per foot, and angles of attack from 30 to 90 deg. Although swept-cylinder theory provides a reasonable correlation of the measured laminar heat-transfer rates in the plane of symmetry, improved correlation with the measurements is obtained if the three-dimensional nature of the flow is taken into account. In cases where the boundary layer on the windward forebody was turbulent, the large velocity gradients near the chines produced relaminarization of the boundary layer prior to separation. The average heat-transfer-rate in the separated region, which is weakly dependent on the free-stream conditions, was found to be a linear function of the angle of attack. For a given flow condition the effect of the leeward geometry on heat transfer can be correlated by a single geometric parameter which is dependent on the location of separation.

Bertin, J. J.↗
NASA NTRS1972

Aerothermodynamic measurements for space shuttle configuration in hypersonic wind tunnels

The effect of shuttle configuration geometry, angle of attack, and free stream flow conditions on the heat-transfer distribution as influenced by three-dimensional effects, the wing-fuselage shock-interaction, and resultant wing-impingement phenomena are examined. In addition, the data provided information regarding the flow field in the vicinity of the nose and boundary layer transition in the plane of symmetry of the fuselage. The data included measurements of the surface pressure, the heat transfer rate distributions, (using models instrumented with thermocouples and models painted with thermographic phosphor) and schlieren and shadowgraph photographs. Posttest photographs of the painted models supplemented the heat transfer data.

Bertin, J. J.↗
NASA NTRS1972

Effect of mass-addition distribution and injectant on heat transfer and transition criteria.

Surface pressures, heat-transfer rates, and transition locations for a sharp cone (whose semivertex angle is 12 deg) were obtained in a hypervelocity wind tunnel at a free-stream Mach number of 12 and a free-stream Re/ft range of 3,000,000 to 6,000,000. The effects of injecting either methane, nitrogen, or Freon-22 (at rates up to 2.1% of free-stream rate) were studied for a uniform injection-distribution and for a variable injection-distribution. Gaseous injection had little effect on the surface pressure measurements. For a given mass injection distribution, the laminar region heat-transfer decreases as the injection rate increases or as the molecular weight of the injectant decreases. For a given mass-injection rate (integrated over the surface of the entire cone), the transition location and heat-transfer rates were sensitive to the injection distribution. The transition Reynolds numbers were significantly greater when the local injection rate was constant over the surface of the cone.

Bertin, J. J.↗
NASA NTRS1971

A study of boundary layer transition on outgassing cones in hypersonic flow

Surface heat-transfer rates and pressures were measured at hypersonic speeds on sharp cones at zero angle of attack with and without gas injection. Using the non-injection results for reference data the effects on heating and transition location of surface roughness and injectant rate, distribution and composition were determined. The transition location was sensitive to the injectant distribution. The transition Reynolds numbers were significantly greater when the injectant distribution was constant than with a variable distribution. The measured heat-transfer distribution were also strongly dependent upon the injectant distribution. Transition Reynolds number results obtained during this program with a variable injectant distribution were correlated with a limited amount of data available for a degrading model tested in a different facility. Transitional data with constant injectant distribution were correlated with earlier results. An empirical correlation of heat-transfer reduction due to gas injection in turbulent flow was developed for both distributions tested. Several effects of mass addition on heating and transition, which have been earlier reported, were observed.

Stalmach, C. J., Jr.↗
NASA NTRS1971

Flow field measurements for cylindrical configurations in a hypersonic wind tunnel: Windward and leeward flow fields

Windward and leeward measurements were made for a variety of simulated infinite cylinders exposed to hypersonic streams over an angle of attack from 30 deg to 90 deg. For the range of conditions included in the study, the following conclusions are made: (1) Swept cylinder theory provides a reasonable correlation of the measured laminar heat transfer rates from the plane of symmetry. (2) The boundary layer transition criteria in the plane of symmetry are a function of the transverse curvature. (3) Relaminarization of the circumferential boundary layer for a right circular cylinder was observed at the highest Reynolds number tested. (4) The effect of leeside geometry on the average heat transfer rate can be correlated with a single geometric parameter which is dependent on the location of separation. (5) The relationship of leeward heating to angle of attack is virtually linear for each cross section. (6) No systematic effect of free stream Reynolds number was observed.

Bertin, J. J.↗