Search NASA⌕ Search

Engineering topics

Betti, R.

Publications and source records attributed to Betti, R..

At least 73 records · Page 4

Generation of strong magnetic fields for magnetized plasma experiments at the 1-MA pulsed power machine

Pulsed power technology provides a platform for investigating plasmas in strong magnetic fields using a university-scale machine. Presented here are methods for generating and measuring the 1–4-MG magnetic fields developed for the 1-MA Zebra pulsed power generator at the University of Nevada, Reno. A laser coupled with the Zebra generator produces a magnetized plasma, and experiments investigate how a megagauss magnetic field affects the two-plasmon decay and the expansion of the laser-produced plasma in both transverse and longitudinal magnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mitigation of mode-one asymmetry in laser-direct-drive inertial confinement fusion implosions

Nonuniformities present in the laser illumination and target in laser-driven inertial confinement fusion experiments lead to an asymmetric compression of the target, resulting in an inefficient conversion of shell kinetic energy to thermal energy of the hot-spot plasma. In this paper, the effects of asymmetric compression of cryogenic deuterium tritium laser-direct-drive implosions are examined using a suite of nuclear and x-ray diagnostics on the OMEGA laser. The neutron-averaged hot-spot velocity (~uhs) and apparent ion temperature (Ti) asymmetry are determined from neutron time-of-flight measurements of the primary deuterium tritium fusion neutron energy spectrum, while the areal density (rhoR) of the compressed fuel surrounding the hot spot is inferred from measurements of the scattered neutron energy spectrum. The low-mode perturbations of the hot-spot shape are characterized from x-ray self-emission images recorded along three quasi-orthogonal lines of sight. Implosions with significant mode-1 laser drive asymmetries show large hot-spot velocities (>100 km/s) in a direction consistent with the hot-spot elongation observed in x-ray images, measured Ti asymmetry, and rhoR asymmetry. Laser drive corrections have been applied through shifting the initial target location in order to mitigate the observed asymmetry. With the asymmetry corrected, a more-symmetric hot spot is observed with reduced ~uhs, Ti asymmetry, rhoR asymmetry, and a 30% increase in the fusion yield.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mitigation of mode-one asymmetry in laser-direct-drive inertial confinement fusion implosions

Nonuniformities present in the laser illumination and target in laser-driven inertial confinement fusion experiments lead to an asymmetric compression of the target, resulting in an inefficient conversion of shell kinetic energy to thermal energy of the hot-spot plasma. In this paper, the effects of asymmetric compression of cryogenic deuterium tritium laser-direct-drive implosions are examined using a suite of nuclear and x-ray diagnostics on the OMEGA laser. The neutron-averaged hot-spot velocity (u → hs ) and apparent ion temperature (T i ) asymmetry are determined from neutron time-of-flight measurements of the primary deuterium tritium fusion neutron energy spectrum, while the areal density (ρR) of the compressed fuel surrounding the hot spot is inferred from measurements of the scattered neutron energy spectrum. Here, the low-mode perturbations of the hot-spot shape are characterized from x-ray self-emission images recorded along three quasi-orthogonal lines of sight. Implosions with significant mode-1 laser drive asymmetries show large hot-spot velocities (>100 km/s) in a direction consistent with the hot-spot elongation observed in x-ray images, measured T i asymmetry, and ρR asymmetry. Laser drive corrections have been applied through shifting the initial target location in order to mitigate the observed asymmetry. With the asymmetry corrected, a more-symmetric hot spot is observed with reduced u → hs , T i asymmetry, ρR asymmetry, and a 30% increase in the fusion yield.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A multi-channel x-ray temporal diagnostic for measurement of time-resolved electron temperature in cryogenic deuterium–tritium implosions at OMEGA

Electron-temperature (T e ) measurements in implosions provide valuable diagnostic information, as Te is unaffected by residual flows and other non-thermal effects unlike ion temperature inferred from a fusion product spectrum. In OMEGA cryogenic implosions, measurement of T e (t) can be used to investigate effects related to time-resolved hot-spot energy balance. The proposed diagnostic utilizes five fast-rise (~15 ps) scintillator channels with distinct x-ray filtering. Furthermore, titanium and stepped aluminum filtering were chosen to maximize detector sensitivity in the 10 keV–20 keV range, as it has been shown that these x rays have similar density and temperature weighting to the emitted deuterium–tritium fusion neutrons. Initial data collected using a prototype nosecone on the existing neutron temporal diagnostic demonstrate the validity of this diagnostic technique. The proposed system will be capable of measuring spatially integrated T e (t) with 20 ps time resolution and <10% uncertainty at peak emission in cryogenic DT implosions.

47 OTHER INSTRUMENTATION↗

A thermodynamic condition for ignition and burn-propagation in cryogenic layer inertially confined fusion implosions

A Lawson-like criterion for ignition (where self-heating dominates over all energy losses) in a dynamic implosion is developed, which accounts for asymmetry and for differences in an implosion x-ray confinement quality. It is shown that the thermodynamic ignition condition is equivalent to yield amplification levels of 16–32. Since negative pdV work of expansion after stagnation increases energy losses above that of x-ray and electron-conduction losses, the Lawson-like ignition criterion is necessary but not sufficient for igniting the hot spot to propagate into the DT fuel with sufficient vigor to generate high gain. Additionally, a higher dimensional generalization of the Lawson-like criterion, which includes the cooling of the implosion upon disassembly, does provide the needed criteria, and it shows that significantly higher temperature is needed for very high levels of yield amplification compared to what traditional ignition metrics imply.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic-field generation and its effect on ablative Rayleigh–Taylor instability in diffusive ablation fronts

The effects of self-generated magnetic fields on the ablative Rayleigh–Taylor (RT) instability are investigated in the linear regime. The main governing parameters are the Froude number (Fr), which stands for the ratio between ablative convection and acceleration of the target, and the Mach number at the ablation front (Ma), assumed to be small (isobaricity). During the development of the RT instability, magnetic fields are generated due to misalignment between pressure and density gradients (Biermann-battery effect). They accumulate at the section of the ablation front where the Nernst and the plasma velocities cancel each other. The magnetic field modifies the dynamics of the instability through the Righi–Leduc term, which acts as a heat source in the energy equation. It is found that the B fields affect perturbations with short wavelengths up to the most unstable wave in the spectrum. Here, the B field plays a destabilizing role for moderate Froude numbers and becomes stabilizing for large Froude numbers. For plastic ablators, the Fr threshold is found to be Fr = 5.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear bubble competition of the multimode ablative Rayleigh–Taylor instability and applications to inertial confinement fusion

The self-similar nonlinear evolution of the multimode ablative Rayleigh–Taylor instability (RTI) and the ablation-generated vorticity effect are studied for a range of initial conditions. We show that, unlike classical RTI, the nonlinear multimode bubble-front evolution remains in the bubble competition regime due to ablation-generated vorticity, which accelerates the bubbles, thereby preventing a transition into the bubble-merger regime. We develop an analytical bubble competition model to describe the linear and nonlinear stages of ablative RTI. Here, we show that vorticity inside the multimode bubbles is most significant at small scales with large initial perturbation. Since these small scales persist in the bubble competition regime, the self-similar growth coefficient ab can be enhanced by up to 30% relative to ablative bubble competition without vorticity effects. We use the ablative bubble competition model to explain the hydrodynamic stability boundary observed in OMEGA low-adiabat implosion experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct-drive laser fusion: status, plans and future

Laser-direct drive (LDD), along with laser indirect (X-ray) drive (LID) and magnetic drive with pulsed power, is one of the three viable inertial confinement fusion approaches to achieving fusion ignition and gain in the laboratory. The LDD programme is primarily being executed at both the Omega Laser Facility at the Laboratory for Laser Energetics and at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory. LDD research at Omega includes cryogenic implosions, fundamental physics including material properties, hydrodynamics and laser–plasma interaction physics. LDD research on the NIF is focused on energy coupling and laser–plasma interactions physics at ignition-scale plasmas. Limited implosions on the NIF in the ‘polar-drive’ configuration, where the irradiation geometry is configured for LID, are also a feature of LDD research. The ability to conduct research over a large range of energy, power and scale size using both Omega and the NIF is a major positive aspect of LDD research that reduces the risk in scaling from OMEGA to megajoule-class lasers. Furthermore, the paper will summarize the present status of LDD research and plans for the future with the goal of ultimately achieving a burning plasma in the laboratory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-consistent theory of the Darrieus–Landau and Rayleigh–Taylor instabilities with self-generated magnetic fields

The Rayleigh–Taylor (RT) and Darrieus–Landau (DL) instabilities are studied in an inertial confinement fusion context within the framework of small critical-to-shell density ratio D R and weak acceleration regime, i.e., large Froude number Fr. The quasi-isobaric analysis in Sanz et al. is completed with the inclusion of non-isobaric and self-generated magnetic-field effects. The analysis is restricted to perturbation wavelengths k~1 larger than the conduction length scale at the ablation front, yet its validity ranges from wavelengths shorter and larger than the conduction layer width (distance between the ablation front and the critical surface). The use of a sharp boundary model leads to a single analytical expression of the dispersion relation encompassing both instabilities. The two new effects come into play by modifying the perturbed mass and momentum fluxes at the ablation front. The momentum flux (perturbed pressure at the spike) is the predominant stabilizing mechanism in the RT instability (overpressure) and the driving mechanism in the DL instability (underpressure). The non-isobaric effects notably modify the scaling laws in the DL limit, leading to an underpressure scaling as ~k –11/15 rather than ~k –2/5 obtained in the quasi-isobaric model. The magnetic fields are generated due to misalignment between pressure and density gradients (Biermann battery effect). They affect the hydrodynamics by bending the heat flux lines. Within the framework of this paper, they enhance ablation, resulting in a stabilizing effect that peaks for perturbation wavelengths comparable to the conduction layer width. Here, the combination of parameters D R Fr 2/3 defines the region of predominance of each instability in the dispersion relation. It is proven that the DL region falls outside of the parameter range in inertial confinement fusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterizing laser preheat for laser-driven magnetized liner inertial fusion using soft x-ray emission

Laser heating of a gas in a cylindrical liner held in by a thin foil window is a critical process in the MagLIF (magnetized liner inertial fusion) concept. Window burn-through and gas heating for OMEGA scale MagLIF cylinders as a function of time have been determined using spectrally integrated soft x-ray diagnostics. Window laser absorption is classified in terms of the emitted x-rays from the window plasma as a function of laser energy, and shows that laser energy absorbed is weakly dependent on incident intensity. Radiation-hydrodynamic simulations overestimate the amount of laser energy absorbed by the window as evidenced by the increase in x-ray radiation across several photon energy bands compared to experiments. Gas temperatures inferred from soft x-ray emission from the front 1 mm of the liner are shown to evolve in time in a similar manner to simulation predictions. In conclusion, soft x-ray emission from the gas within the region of the liner that is normally imploded is shown to meet the 100 eV requirements set by the initial point design for laser-driven MagLIF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hybrid target design for imprint mitigation in direct-drive inertial confinement fusion

A target design for mitigating the Rayleigh-Taylor instability is proposed for use in high energy density and direct-drive inertial confinement fusion experiments. In this scheme, a thin gold membrane is offset from the main target by several-hundred microns. A strong picket on the drive beams is incident upon this membrane to produce x rays which generate the initial shock through the target. The main drive follows shortly thereafter, passing through the ablated shell and directly driving the main target. The efficacy of this scheme is demonstrated through experiments performed at the OMEGA EP facility, showing a reduction of the Rayleigh-Taylor instability growth which scales exponentially with frequency, suppressing development by at least a factor of 5 for all wavelengths below 100 μm. Furthermore, this results in a delay in the time of target perforation by ~40%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Axial proton probing of magnetic and electric fields inside laser-driven coils

In a laser-driven coil, a laser is used to eject electrons from a plate, which then draws a current through a loop. Diagnosing the field strength, geometry, and conditions within these loops has been one of the primary difficulties in fielding this type of target. In this paper, the diagnostic technique of axial proton probing with a mesh fiducial of a laser-driven coil is demonstrated. Multiple coil types were driven by a 1 ns, 1.25 kJ long pulse beam and probed several times. Here, this technique provides significantly more information than transverse probing on electric- and magnetic-field strength in the region of interest and shows in our experiment complex, non-uniform current path structures and charge distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutron yield enhancement and suppression by magnetization in laser-driven cylindrical implosions

In inertial confinement fusion, an externally applied magnetic field can reduce heat losses in the compressing fuel thereby increasing neutron-averaged ion temperatures and neutron yields. Yet, magnetization is only beneficial if the magnetic pressure remains negligible compared to the fuel pressure. Experiments and three-dimensional magneto-hydrodynamic simulations of cylindrical implosions on the OMEGA laser show ion temperature and neutron yield enhancements of up to 44% and 67%, respectively. As the applied, axial magnetic field is increased to nearly 30T, both experiments and simulations show yield degradation. For magnetized, cylindrical implosions, there exists an optimal magnetic field that maximizes the increase in yield. Limiting the fuel convergence ratio by preheating the fuel can further increase the benefit of magnetization. The findings demonstrate that it is possible to create a plasma with a density of order 1 g/cm 3 and an ion temperature greater than 1 keV with a magnetic pressure comparable to the thermal pressure, a new regime for laser-produced plasmas on OMEGA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inferring thermal ion temperature and residual kinetic energy from nuclear measurements in inertial confinement fusion implosions

In inertial con finement fusion implosion experiments, the presence of residual anisotropic fluid motion within the stagnating hot spot leads to signifi cant variations in ion-temperature measurements using neutron time- of-flight detectors along different lines of sight. The minimum ion-temperature measurement is typically used as representative of the thermal temperature. In the presence of isotropic flows, however, even the minimum DT neutron-inferred ion temperature can be well above the plasma thermal temperature. Using both DD and DT neutron-inferred ion-temperature measurements, we show that it is possible to determine the contribution of isotropic flows and infer the DT burn-averaged thermal ion temperature. The contribution of large isotropic flows on driving the ratio of DD to DT neutron-inferred ion temperatures well below unity and approaching the lower bound of 0.8 is demonstrated in multimode simulations. The minimum DD neutron- inferred ion temperature is determined from the velocity variance analysis, accounting for the presence of isotropic flows. Being close to the DT burn-averaged thermal ion temperature, the inferred DD minimum ion temperatures demonstrate a strong correlation with the experimental yields in the OMEGA implosion database. An analytical expression is also derived to explain the effect of mode ℓ = 1 ion-temperature measurement asymmetry on yield degradations caused by the anisotropic flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theory of ignition and burn propagation in inertial fusion implosions

A detailed analytic model is presented here to investigate the physics of burn propagation in inertially confined plasmas. The onset of ignition and burn propagation occurs when alpha heating of the hot spot causes rapid ablation of shell mass into the hot spot. This allows large energy gains to be achieved since most of the fuel mass is located in the shell. Here, we first present a comprehensive review of previous analytic models that have been used to describe the physics of hot-spot evolution and ignition; we then show that a proper description of a propagating burn wave requires a comprehensive model of hot spot and shell evolution that includes proper mass conservation in the shell, fusion reactivity, and fuel depletion. The analytic theory is in good agreement with detailed radiation-hydrodynamic simulations that predict the onset of burn propagation as occurring when the yield enhancement caused by alpha heating is between 15- and 25-fold, $f_α$ ~ 1.4, where $f_α$ = alpha energy deposited/hot-spot energy at bang time, and the hot-spot burnup fraction is approximately 2%. We show that the definition of ignition is not sensitive to the alpha-particle stopping power nor asymmetries provided that the absorbed fraction of alpha particles $θ_α$ is correctly accounted for. Finally, we use the results of 2-D simulations to show that even when $θ_α$ is small and unknown (as is true in hot spots with mid modes that have significant leakage of alpha particles into the surrounding cold bubbles), one can still relate the experimentally measureable parameter $\chi^{53}_α$ to the yield amplification and the burning-plasma parameter $Q^{\text{hs}}_α$ = alpha energy deposited/total input work delivered to the hot spot

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of laser-driven magnetic fields with a continuous wave Faraday rotation diagnostic

Magnetic fields driven by a laser in coil targets were studied for laser energies of ~25 J and two pulse durations of 2.8 ns and 70 ps. Axial magnetic fields in the coils were measured by continuous wave Faraday rotation diagnostics. The diagnostics indicated magnetic fields of 6–14 T in the coil and currents of 10–20 kA. Magnetic fields were compared for similar laser targets, focusing conditions, and laser energies. A 30-times increase in the intensity of the laser beam by reducing the pulse duration resulted in an increase in the magnetic field and current by a factor of 2. The relaxation time of the magnetic pulse was on the sub-microsecond scale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling magnetic confinement of laser-generated plasma in cylindrical geometry leading to disk-shaped structures

Radiation-magnetohydrodynamic simulations were able to reproduce features of the plasma structures observed in recent experiments1, where a laser was used to ablate plasma in a 3 MG magnetic field. The laser ablates the plasma, and localized structures are formed due to the inhibition of heat flow by the magnetic field. The large magnetic pressures cause the plasma to pinch. In an azimuthal fi eld, a disc-shaped plasma is generated. According to simulations, the disc has electron densities that are underdense to the laser, ranging from 10 18 to 10 19 cm -3 , and electron temperatures in the 300 to 1000 eV range during its evolution, similar to experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental study of hot electron generation in shock ignition relevant high-intensity regime with large scale hot plasmas

In the shock ignition (SI) laser fusion scheme, hot electrons generated by the laser spike pulse can either preheat the fuel or strengthen the ignition shock, depending on the hot electron characteristics. We conducted a planar target experiment on the OMEGA-EP laser facility and characterized the temperature and total energy of hot electrons generated from a kilojoule-class 100-ps infrared (IR) or a 1-ns ultraviolet (UV) laser interacting with a large (L n ~330-450 μm) and hot (T e ~1-2 keV) coronal plasma at the SI-relevant intensities (~10 16 W/cm 2 ). The IR laser converts ~2.5% energy into hot electrons with T hot ~ 60–90 keV, while the UV laser couples 0.8% ± 0.7% energy into T hot =27 ± 9 keV hot electrons. The IR-produced hot electrons yield five times higher Cu Kα emission than the UV case, confirming the higher electron conversion efficiency with the IR laser. The low energy conversion from the UV laser to hot electrons may be due to the refraction of the off-normal incident laser in the large coronal plasma. These findings are the first comparisons of hot electron generation between the IR and UV pulses at kilojoule scales in SI-relevant large-scale plasmas. The findings may expand the SI design space to include IR lasers as the possible spike lasers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗