Search NASA⌕ Search

Engineering topics

Bhatia, Surita R.

Publications and source records attributed to Bhatia, Surita R..

16 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Microscale dynamics in thermoreversible hydrogels: Impact of probe size and concentration

Passive microrheology techniques using dynamic light scattering (DLS) and X-ray photon correlation spectroscopy (XPCS) have emerged as important techniques for characterizing the dynamics and viscoelastic properties of soft polymeric biomaterials. However, the impact of probe particle type, size, and concentration are important considerations in interpretation of results and comparison to properties obtained from bulk rheology measurements. In this work, we investigate a model thermoreversible polymeric hydrogel and compare results from DLS-microrheology with different size and concentrations of polystyrene probe particles and XPCS-microrheology with inorganic nanoparticles. We obtained trends that aligned most closely with the macroscopic rheology with probe particles that are slightly larger than the characteristic length scale of the gel structure, but within the same order of magnitude. By contrast, larger probe particles yielded microrheology data that are more dominated by elastic behavior than what we might expect from bulk rheology experiments, while use of small inorganic nanoparticles in XPCS-microrheology resulted in a more a more viscous response than would be expected based on the bulk rheology. Finally, this study demonstrates the utility of passive DLS- and XPCS-based microrheology in characterizing the rheological properties of complex polymeric biomaterials, while also highlighting important considerations in experimental design and choice of type, size, and concentration of probe particles used.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Structural properties of optically clear bacterial cellulose produced by Komagataeibacter hansenii using arabitol

Here, bacterial cellulose (BC) exhibits beneficial properties for use in biomedical applications but is limited by its lack of tunable transparency capabilities. To overcome this deficiency, a novel method to synthesize transparent BC materials using an alternative carbon source, namely arabitol, was developed. Characterization of the BC pellicles was performed for yield, transparency, surface morphology, and molecular assembly. Transparent BC was produced using mixtures of glucose and arabitol. Zero percent arabitol pellicles exhibited 25% light transmittance, which increased with increasing arabitol concentration through to 75% light transmittance. While transparency increased, overall BC yield was maintained indicating that the altered transparency may be induced on a micro-scale rather than a macro-scale. Significant differences in fiber diameter and the presence of aromatic signatures were observed. Overall, this research outlines methods for producing BC with tunable optical transparency, while also bringing new insight to insoluble components of exopolymers produced by Komagataeibacter hansenii.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

In situ saxs characterization of thermoresponsive behavior of a poly(ethylene glycol)-graft-(poly(vinyl caprolactam)-co-poly(vinyl acetate)) amphiphilic graft copolymer

In this work, we report the thermoresponsive assembly and rheology of an amphiphilic thermosensitive graft copolymer, poly(ethylene glycol)-graft-(poly(vinyl caprolactam)-co-poly(vinyl acetate)) (commercial name Soluplus ® ), which has been investigated for potential biomedical applications. It has received attention due to is ability to solubilize hydrophobic drugs and for its thickening behavior close to body temperature. Through use of the synchrotron at Brookhaven National Lab, and collaboration with the department of energy, the nanoscale structure and properties can be probed in greater detail. Soluplus ® undergoes two structural changes as temperature is increased; the first, a concentration independent change where samples become turbid at 32 °C. Increasing the temperature further causes the formation of physically associated hydrogels. This sol-gel transition is concentration dependent and occurs at 32 °C for 40 wt% samples, and increases to 42 °C for 10 wt% samples. From variable temperature SAXS characterization micelles of 20–25 nm in radius can be seen and maintain their size and packing below 32 °C. A gradual increase in the aggregation of micelles corresponding to a thickening of the material is also observed. Close to and above the gelation temperature, micelles collapse and form a physically associated 3D network. A model is proposed to explain these physical effects, where the poly(vinyl caprolactam) group transitions from the hydrophilic corona at room temperature to the hydrophobic core as temperature is increased.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Controlling Rheology of Fluid Interfaces through Microblock Length of Sequence-Controlled Amphiphilic Copolymers

Previous studies have demonstrated that films of sequence-controlled amphiphilic copolymers display contact angles that depend on microblock size. This suggests that microblock length may provide a means of tuning surface and interfacial properties. In this work, the interfacial rheology of a series of sequence-controlled copolymers, prepared through the addition of bicyclo[4.2.0]oct-1(8)-ene-8-carboxamide (monomer A) and cyclohexene (monomer B) to generate sequences up to 24 monomeric units composed of (A m B n ) i microblocks, where m, n, and i range from 1 to 6. Interfacial rheometry is used to measure the mechanical properties of an air–water interface with these copolymers. As the microblock size increases, the interfacial storage modulus, G', increases, which may be due to an increase in the size of interfacial hydrophobic domains. Small-angle X-ray scattering shows that the copolymers have a similar conformation in solution, suggesting that any variations in the mechanics of the interface are due to assembly at the interface, and not on solution association or bulk rheological properties. This is the first study demonstrating that microblock size can be used to control interfacial rheology of amphiphilic copolymers. Here, the results provide a new strategy for controlling the dynamics of fluid interfaces through precision sequence-controlled polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of stereochemistry on nanoscale assembly of ABA triblock copolymers with crystallizable blocks

We report on the nanoscale assembly of poly(lactic acid)-b-poly(ethylene oxide)-b-poly(lactic acid) (PLA-PEO-PLA) triblock copolymers in water, focusing on the effect of stereochemistry, where the PLA blocks are statistical copolymers of l-lactide and d-lactide with l/d ratios of 100/0, 95/5, 90/10, 85/15, 75/25, and 50/50. Small-angle neutron scattering (SANS) shows a nearly constant d-spacing as concentration varies in triblock systems with l/d ratios of 90/10 and 95/5, which we attribute to inhomogeneity in the structure of these gels, supported by previous USANS and confocal microscopy studies. The SANS data fit well to a core-shell ellipsoid form factor model with a hard-sphere structure factor. Polymeric micelles with l/d ratios from 75/25 to 85/15 displayed very high aggregation numbers, consistent with a strong interaction between PLA chains and the enhanced storage modulus observed in rheological studies of these systems. While the 90/10 and 95/5 samples showed lower aggregation numbers, their SANS profiles shows close spacing between micelles, which may promote a high fraction of intermicellar bridging chains, also consistent with a higher storage modulus. Overall, these results provide insight into the micellar assembly behavior of block copolymers with a crystallizable block, and indicate that tuning stereochemistry of PLA-based block copolymers is an effective means of modifying micellar properties for specific applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

XPCS Microrheology and Rheology of Sterically Stabilized Nanoparticle Dispersions in Aprotic Solvents

In this study, X-ray photon correlation spectroscopy (XPCS) microrheology and conventional bulk rheology were performed on silica nanoparticle dispersions associated with battery electrolyte applications to probe the properties of these specific complex materials and to explore the utility of XPCS microrheology in characterizing nanoparticle dispersions. Sterically stabilized shear-thickening electrolytes were synthesized by grafting poly(methyl methacrylate) chains onto silica nanoparticles. Coated silica dispersions containing 5–30 wt % nanoparticles dispersed in propylene carbonate were studied. In general, both XPCS microrheology and conventional rheology showed that coated silica dispersions were more viscous at higher concentrations, as expected. The complex viscosity of coated silica dispersions showed shear-thinning behavior over the frequency range probed by XPCS measurements. However, measurements using conventional mechanical rheometry yielded a shear viscosity with weak shear-thickening behavior for dispersions with the highest concentration of 30% particles. Our results indicate that there is a critical concentration needed for shear-thickening behavior, as well as appropriate particle size and surface polymer chain length, for this class of nanoparticle-based electrolytes. The results of this study can provide insights for comparing XPCS microrheology and bulk rheology for related complex fluids and whether XPCS microrheology can capture expected macroscopic rheological properties by probing small-scale particle dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Techniques to characterize dynamics in biomaterials microenvironments: XPCS and microrheology of alginate/PEO–PPO–PEO hydrogels

Many recent studies have highlighted the timescale for stress relaxation of biomaterials on the microscale as an important factor in regulating a number of cell-material interactions, including cell spreading, proliferation, and differentiation. Relevant timescales on the order of 0.1–100 s have been suggested by several studies. While such timescales are accessible through conventional mechanical rheology, several biomaterials have heterogeneous structures, and stress relaxation mechanisms of the bulk material may not correspond to that experienced in the cellular microenvironment. Here we employ X-ray photon correlation spectroscopy (XPCS) to explore the temperature-dependent dynamics, relaxation time, and microrheology of multicomponent hydrogels comprising of commercial poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PEO) triblock copolymer F127 and alginate. Previous studies on this system have shown thermoreversible behavior in the bulk oscillatory shear rheology. At physiological temperatures, bulk rheology of these samples shows behavior characteristic of a soft solid, with G' > G" and no crossover between G' and G" over the measurable frequency range, indicating a relaxation time >125 s. By contrast, XPCS-based microrheology shows viscoelastic behavior at low frequencies, and XPCS-derived correlation functions show relaxation times ranging from 10–45 s on smaller length scales. Finally, we are able to use XPCS to effectively probe the viscoelasticity and relaxation behavior within the material microenvironments.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Direct Evidence of Graphene-Induced Molecular Reorientation in Polymer Films

For the first time, direct evidence of graphene-induced molecular reorientation in polymer films using polarization modulated infrared reflection absorption spectroscopy (PMIRRAS) are presented. By creating favorable electrostatic interactions, graphene-polymer interfaces can be controlled by varying polymer and solvent composition. After trans of unmodified graphene from copper onto a polymer substrate, polymer chain rearrangement relative to the orientation at the polymer-copper interface is observed using PM-IRRAS. Transfer success is characterized using both optical transmission measurements and Raman spectroscopy to quantify the transfer fidelity, i.e. graphene coverage fraction. Taken together, oxygencontaining poly(ethylene-co-vinyl acetate) shows more polymer chain rearrangement and better graphene coverage compared to oxygen-free polyethylene. Polymer composition seems to dominate graphene-polymer interactions while solvent choice has a smaller effect on transfer quality. These results are the first direct measurement of this effect and point towards the possibility of engineering graphene-polymer interactions for specific applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Evaporative Assembly: Dual-Scale Nanostructures via Evaporative Assembly (Adv. Mater. Interfaces 7/2020)

In article number 1901954, Sunita Srivastava, Surita R. Bhatia, and co-workers demonstrate that evaporative assembly of functionalized nanoparticles can yield striking dual-scale hierarchical structures. Regular microscale stripes of nanoparticle monolayers with hexagonal nanoscale order are obtained on physically and chemically homogeneous substrates through evaporation of a suspension of DNAfunctionalized nanoparticles with a charged shell. The stripe width, spacing and nanoparticle ordering can be controlled by varying nanoparticle concentration and can be described by a simple analytical model. The results indicate that the interplay between “stick-slip” motion of the droplet contact line and Coulombic and steric nanoparticle interactions control the formation of the observed structures. Finally, this work demonstrates a simple cost-effective mask-free method for fabricating nanostructured 2D materials and metasurfaces for applications ranging from energy conversion/storage to optoelectronics and nanophotonics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Dual‐Scale Nanostructures via Evaporative Assembly

Abstract Dual‐scale hierarchical structures with regular microscale patterns and varying degree of nanoscale crystalline order are synthesized on physically and chemically homogeneous substrates by evaporative self‐assembly with a suspension of DNA‐functionalized nanoparticles (NPs) with a charged core shell. For a certain NP concentration range, periodic concentric rings in a stripe‐like micropattern are produced over macroscale surface areas by an NP monolayer with hexagonal lattice structure at the nanoscale. The stripe width, spacing, and nanoparticle ordering can be controlled by varying the NP concentration. The results indicate that the interplay between “stick‐slip” motion of the droplet contact line and coulombic and steric NP interactions control the formation of the observed structures. A simple analytical model is proposed to account for the experimental observations and guide the future design of different nanostructure morphologies. This work demonstrates a simple cost‐effective mask‐free method for fabricating large‐area nanostructured 2D materials and metasurfaces for applications ranging from energy conversion/storage to optoelectronics and nanophotonics.

Srivastava, Sunita↗