Search NASA⌕ Search

Engineering topics

Bickel, Douglas L.

Publications and source records attributed to Bickel, Douglas L..

At least 19 records

Notes on Minimum Area for Radar Antenna

Perhaps no single radar component has a more profound effect on Synthetic Aperture Radar (SAR) performance than the antenna. Especially for spaceborne SAR, one particular common design constraint for the antenna is the minimum antenna area constraint. While useful, it relies on a number of assumptions and approximations that may not always be valid or applicable. Indeed, useful operational systems have been built and flown that do not strictly adhere to this constraint. A closer examination of this constraint yields insights into what the real limitations are, or might be.

42 ENGINEERING↗

Notes on Regression Analysis for Radar Parameter Estimation

A fundamental task of radar, beyond merely detecting a target, is to estimate some parameters associated with it. For example, this might include range, direction, velocity, etc. In any case, multiple measurements, often noisy, need to be processed to yield a ‘best estimate’ of the parameter. A common mathematical method for doing so is called “Regression” analysis. The goal is to minimize the expected squared error in the estimate. Even when alternate algorithms are considered, the least squared-error regression analysis is the benchmark against which alternatives are compared.

47 OTHER INSTRUMENTATION↗

Synthetic Aperture Radar Image Geolocation Using Fiducial Images

Synthetic Aperture Radar (SAR) creates imagery of the earth’s surface from airborne or spaceborne radar platforms. However, the nature of any radar is to geolocate its echo data, i.e., SAR images, relative to its own measured radar location. Acceptable accuracy and precision of such geolocation can be quite difficult to achieve, and is limited by any number of parameters. However, databases of geolocated earth imagery do exist, often using other imaging modalities, with Google Earth being one such example. These can often be much more accurate than what might be achievable by the radar itself. Consequently, SAR images may be aligned to some higher accuracy database, thereby improving the geolocation of features in the SAR image. Examples offer anecdotal evidence of the viability of such an approach.

47 OTHER INSTRUMENTATION↗

Extension of Interferometric Synthetic Aperture Radar to Multiple Phase-Centers (Midyear LDRD Final Report – second edition)

This document contains the final report for the midyear LDRD titled "Extension of Interferometric Synthetic Aperture Radar to Multiple Phase-Centers." This report presents an overview of several methods for approaching the two-target in layover problem that exists in interferometric synthetic aperture radar systems. Simulation results for one of the methods are presented. In addition, a new direct approach is introduced.

42 ENGINEERING↗

SAR Geolocation Using Range-Doppler Multilateration

Radar is by its basic nature a ranging instrument. If radar range and range-rate measurements from multiple directions can be made and assembled, then multilateration allows locating a feature common to the set of Synthetic Aperture Radar (SAR) images to an accurate 3-D coordinate. The ability to employ effective multilateration algorithms is highly dependent on the geometry of the data collections, and the accuracy with which relative range measurements can be made. The problem can be cast as a least-squares exercise, and the concept of Dilution of Precision can describe the accuracy and precision with which a 3-D location can be made.

42 ENGINEERING↗

SAR Geolocation Using Range-Only Multilateration

Radar is by its basic nature a ranging instrument. If radar range measurements from multiple directions can be made and assembled, then multilateration allows locating a feature common to the set of Synthetic Aperture Radar (SAR) images to an accurate 3-D coordinate. The ability to employ effective multilateration algorithms is highly dependent on the geometry of the data collections, and the accuracy with which relative range measurements can be made. The problem can be cast as a least-squares exercise, and the concept of Dilution of Precision can describe the accuracy and precision with which a 3-D location can be made.

47 OTHER INSTRUMENTATION↗

Synthetic Aperture Radar Height of Focus

Synthetic Aperture Radar (SAR) projects a 3-D scene’s reflectivity into a 2-D image. In doing so, it generally focusses the image to a surface, usually a ground plane. Consequently, scatterers above or below the focal/ground plane typically exhibit some degree of distortion manifesting as a geometric distortion and misfocusing or smearing. Limits to acceptable misfocusing define a Height of Focus (HOF), analogous to Depth of Field in optical systems. This may be exacerbated by the radar’s flightpath during the synthetic aperture data collection. It might also be exploited for target height estimation and offer insight to other height estimation techniques.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Stripmap SAR Data Collection Geometry on a Round Earth

A stripmap Synthetic Aperture Radar (SAR) image is a long SAR image along some centerline, and formed from multiple synthetic apertures. At issue is that the centerline in the image actually corresponds to an arc on a round earth, and multiple strategies exist for fitting the image centerline to the round earth. Some of those strategies involve Rhumb lines, great circle paths, and great ellipse paths. Some are better than others in polar regions. Notions of parallel flight paths for the radar during data collection also require careful consideration of the geometry of a round earth.

47 OTHER INSTRUMENTATION↗

Radar Motion Measurements and Synthetic Aperture Radar Image Geolocation Accuracy

Once a Synthetic Aperture Radar (SAR) image is formed, the natural question then is, "Where is this image?" and/or "Where exactly is this feature displayed in the image?" Thus, geolocation is an important exploitation of the SAR image. Since SAR measures relative location to its own position, it is crucial to understand how the radars position and motion imp acts the ability to geolocate a feature in the SAR image. Furthermore, accuracy and precision of navigation aids like GPS directly impact the goodness of the geolocation solution. These relationships are developed and discussed.

58 GEOSCIENCES↗

Spotlight SAR Data Collection Geometry from ECEF Coordinates

High-performance spotlight Synthetic Aperture Radar (SAR) requires measurement of the radars motion during the synthetic aperture. A convenient coordinate frame for motion measurement is often not the convenient coordinate frame for motion compensation during the SAR data generation and image formation processing. A convenient frame for radar motion measurement is the Earth-Centered Earth-Fixed (ECEF) coordinate frame, whereas spotlight SAR processing typically require s polar coordinates from a selected Scene Reference Point (SRP). This report presents the conversion from ECEF coordinates to appropriate parameters for SAR processing.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Two-Channel Monopulse Antenna Null Steering

Traditional dual-channel phase-monopulse and amplitude-monopulse antenna systems might electrically steer their difference-channel nulls by suitably adjusting characteristics of their constituent beams or lobes. A phase-monopulse systems' null might be steered by applying suitable relative phase shifts. An amplitude-monopulse systems' null might be steered by applying a suitable relative beam amplitude scaling. The steering of the null might be employed by a continuously mechanically-scanning antenna to stabilize the null direction over a series of radar pulses.

42 ENGINEERING↗

Antenna Requirements for GMTI Radar Systems

A principal performance-enabling, or performance-limiting, component of Ground-Moving-Target-Indication (GMTI) radar systems is the antenna. Undesired clutter leakage into antenna sidelobes can be particularly problematic, generating undesired false alarms. GMTI system antennas can be designed with characteristics and features to allow discriminating and depressing/suppressing problematic sidelobe leakage of clutter and other undesired signals. We offer analysis and design guidelines for doing so.

42 ENGINEERING↗

A Concept for Platform Velocity Estimation Using a Multiphase Center Radar

An important part of a navigation system for a moving platform is the estimation of the rate of travel. This document presents a method for estimating the platform velocity in 3-dimensions using multiple antenna subarrays which could be used to augment navigation in a GPS-degraded environment. An advantage of this technique is that it does not require any knowledge of a positions of any landmarks. Results from radar data collected by the Sandia National Laboratories demonstration radar system are presented to illustrate the promise of this technique.

42 ENGINEERING↗

Apodization of spurs in radar receivers using multi-channel processing

The various technologies presented herein relate to identification and mitigation of spurious energies or signals (aka “spurs”) in radar imaging. Spurious energy in received radar data can be a consequence of non-ideal component and circuit behavior. Such behavior can result from I/Q imbalance, nonlinear component behavior, additive interference (e.g. cross-talk, etc.), etc. The manifestation of the spurious energy in a radar image (e.g., a range-Doppler map) can be influenced by appropriate pulse-to-pulse phase modulation. Comparing multiple images which have been processed using the same data but of different signal paths and modulations enables identification of undesired spurs, with subsequent cropping or apodization of the undesired spurs from a radar image. Spurs can be identified by comparison with a threshold energy. Removal of an undesired spur enables enhanced identification of true targets in a radar image.

42 ENGINEERING↗