Comparison of Three Design Assessment Approaches for a 2-Liter Containment Vessel of a Plutonium Air Transport Package
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Bignell, John.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The Sibling Pin test campaign is a Department of Energy (DOE) research activity within the Spent Fuel and Waste Science and Technology (SFWST) program that is tasked with characterization of high burnup (HBU) fuel in support of the High Burnup Spent Fuel Data Project. Of the 25 fuel rods in the Sibling Pin inventory, approximately 9 rod lengths have been consumed during the first phase (Phase I) of the test campaign leaving approximately 16 rod lengths for the second phase (Phase II) of testing. This plan outlines the Phase II testing and the motivations for performing these tests. Priorities for Phase II testing are based on previously identified knowledge gaps, lessons-learned from Phase I work, the original objectives of the High Burnup Spent Fuel Data Project and the Sibling Pin test campaign, and input from external stakeholders. The priorities for Phase II testing are to obtain data to characterize the effects of annealing on cladding mechanical properties and fuel rod performance, to quantify the creep behavior of cladding materials and fuel rods and the effects of creep deformations on the performance of cladding and fuel rods, and to gather data to support the final closure of the hydride reorientation and radial hydride induced embrittlement gap for HBU fuel rods.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Criticality Control Overpack (CCO) containers are being considered for the disposal of defense-related nuclear waste at the Waste Isolation Pilot Plant (WIPP). At WIPP, these containers would be placed in underground disposal rooms, which will naturally close and compact the containers closer to one another over several centuries. This report details simulations to predict the final container configuration as an input to nuclear criticality assessments. Each container was discretely modeled, including the plywood and stainless steel pipe inside the 55-gallon drum, in order to capture its complex mechanical behavior. Although these high-fidelity simulations were computationally intensive, several different material models were considered in an attempt to reasonably bound the horizontal and vertical compaction percentages. When exceptionally strong materials were used for the containers, the horizontal and vertical closure respectively stabilized at 43:9 % and 93:7 %. At the other extreme, when the containers completely degraded and the clay seams between the salt layers were glued, the horizontal and vertical closure reached respective final values of 48:6 % and 100 %.
Abstract not provided.
Safety basis analysts throughout the U.S. Department of Energy (DOE) complex rely heavily on the information provided in the DOE Handbook, DOE-HDBK-3010,Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities, to determine radionuclide source terms from postulated accident scenarios. In calculating source terms, analysts tend to use the DOE Handbook's bounding values on airborne release fractions (ARFs) and respirable fractions (RFs) for various categories of insults (representing potential accident release categories). This is typically due to both time constraints and the avoidance of regulatory critique. Unfortunately, these bounding ARFs/RFs represent extremely conservative values. Moreover, they were derived from very limited small-scale bench/laboratory experiments and/or from engineered judgment.Thus, the basis for the data may not be representative of the actual unique accident conditions and configurations being evaluated.
Safety basis analysts throughout the U.S. Department of Energy (DOE) complex rely heavily on the information provided in the DOE Handbook, DOE-HDBK-3010, Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities, to determine radionuclide source terms from postulated accident scenarios. In calculating source terms, analysts tend to use the DOE Handbook's bounding values on airborne release fractions (ARFs) and respirable fractions (RFs) for various categories of insults (representing potential accident release categories). This is typically due to both time constraints and the avoidance of regulatory critique. Unfortunately, these bounding ARFs/RFs represent extremely conservative values. Moreover, they were derived from very limited small-scale bench/laboratory experiments and/or from engineered judgment. Thus, the basis for the data may not be representative of the actual unique accident conditions and configurations being evaluated. The goal of this research is to develop a more accurate and defensible method to determine bounding values for the DOE Handbook using state-of-art multi-physics-based computer codes. This enables us to better understand the fundamental physics and phenomena associated with the types of accidents in the handbook. In this fourth year, we improved existing computational capabilities to better model fragmentation situations to capture small fragments during an impact accident. In addition, we have provided additional new information for various sections of Chapters 4 and 5 of the Handbook on free fall powders and impacts of solids, and have provided the damage ratio simulations for containers (7A drum and standard waste box) for various drops and impact scenarios. Thus, this work provides a low-cost method to establish physics-justified safety bounds by considering specific geometries and conditions that may not have been previously measured and/or are too costly to perform during an experiment.
Abstract not provided.
Abstract not provided.
Safety basis analysts throughout the U.S. Department of Energy (DOE) complex rely heavily on the information provided in the DOE Handbook, DOE-HDBK-3010, Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities, to determine radionuclide source terms from postulated accident scenarios. In calculating source terms, analysts tend to use the DOE Handbook’s bounding values on airborne release fractions (ARFs) and respirable fractions (RFs) for various categories of insults (representing potential accident release categories). This is typically due to both time constraints and the avoidance of regulatory critique. Unfortunately, these bounding ARFs/RFs represent extremely conservative values. Moreover, they were derived from very limited small-scale bench/laboratory experiments and/or from engineered judgment. Thus, the basis for the data may not be representative of the actual unique accident conditions and configurations being evaluated. The goal of this research is to develop a more accurate and defensible method to determine bounding values for the DOE Handbook using state-of-art multi-physics-based computer codes.
A new implementation of a multi-scale fragmentation model is introduced that combines existing independent macro and micro-scale models into a single material model within the Library of Advanced Materials for Engineering (LAME) that can be used directly by the finite element structural mechanics code SIERRA/SM, developed at Sandia National Laboratories. The implementation not only joins existing independent fragmentation models into a single framework, but also enables further development by virtue of being integrated into SIERRA/SM. Integration with a finite element structural mechanics code for a true two-way coupling of the fragmentation models that were previously independent. Hereafter, the prior implementation will be referred to as the sequentially applied fragmentation model. In contrast, the newly developed model will be called the integrated two-scale model. The sequentially applied fragmentation model consists of two independent models applied sequentially to account for the macro-scale and microscale fragmentation. The macro-scale fragmentation behavior is calculated using an elastic gradient damage explicit material model developed to model fracture in brittle materials. The micro-scale fragmentation model is an implementation of the 1D cohesive-zone model developed by Zhou, et al. The micro-scale model is implemented by post-processing the macro-scale data that provides initial conditions for the 1D analysis. The micro-scale model is necessary to predict the resulting fragment size distribution at length scales inaccessible to the finite element based macro-scale model. The full range of fragmentation behavior is then predicted by combining the results from the two independent models. The sequentially applied fragmentation model was used to predict the fragments that result from impact loading of a brittle material, which in that case was a ceramic cylinder of commercial UO{sub 2} nuclear fuel. Understanding the fragmentation behavior of such materials is important for evaluating the risk of airborne particulate release under impact loading scenarios. This work will verify the implementation of the integrated two-scale model using the same experiment modeled by the existing sequentially applied model. The purpose of this manuscript is to introduce the new integrated two-scale fragmentation model and validate the implementation against the existing sequentially applied model for a specific case of impact loading of a brittle material. This validation case will not fully utilize the benefits of having the model integrated into the finite element code as a material model. Rather, this study will demonstrate consistency between the two fragmentation models to ensure that the success of the sequentially applied model will be duplicated by the integrated two-scale approach. Once validated, further development of the model can be made by utilizing the integration into the finite element code to create a fully two-way coupled fragmentation model that will be extended to include higher fidelity models.
Abstract not provided.
Safety basis analysts throughout the U.S. Department of Energy (DOE) complex rely heavily on the information provided in the DOE Handbook, DOE - HDBK - 3010, Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities, to determine radionuclide source terms. In calculating source terms, analysts tend to use the DOE Handbook's bounding values on airborne release fractions (ARFs) and respirable fractions (RFs) for various categories of insults (representing potential accident release categories). This is typically due to both time constraints and the avoidance of regulatory critique. Unfortunately, these bounding ARFs/RFs represent extremely conservative values. Moreover, they were derived from very limited small-scale bench/laboratory experiments and/or from engineered judgment. Thus, the basis for the data may not be representative of the actual unique accident conditions and configurations being evaluated. The goal of this research is to develop a more accurate and defensible method to determine bounding values for the DOE Handbook using state-of-art multi-physics-based computer codes. This enables us to better understand the fundamental physics and phenomena associated with the types of accidents in the handbook. In this year, this research included improvements of the high-fidelity codes to model particle resuspension and multi-component evaporation for fire scenarios. We also began to model ceramic fragmentation experiments, and to reanalyze the liquid fire and powder release experiments that were done last year. The results show that the added physics better describes the fragmentation phenomena. Thus, this work provides a low-cost method to establish physics-justified safety bounds by taking into account specific geometries and conditions that may not have been previously measured and/or are too costly to perform.
Abstract not provided.