Search NASA⌕ Search

Engineering topics

Billig, F. S.

Publications and source records attributed to Billig, F. S..

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Analysis of penetration and mixing of gas jets in supersonic cross flow

The JETPEN analysis for gas jets in a supersonic cross flow developed earlier at APL/JHU has been extended in several important ways. First, the treatment of cases with injection at angles other than 90 deg has been redone. Next, the second of the three regions formerly treated has been eliminated. Third, the region downstream of the Mach disk for underexpanded cases has been reformulated such that turbulent entrainment of main stream fluid into the plume is modeled, and the equations of motion are solved marching downstream. These changes now permit prediction of the variation in composition, mixing area growth and all other flow variables along the plume. The analysis has been verified by comparison of predictions and experiment over a wide range of conditions. The result is an analysis capable of reliable predictions of the major flowfield variables that can be run on a PC.

Billig, F. S.↗
NASA NTRS1977

Direct-connect tests of hydrogen-fueled supersonic combustors

Direct-connect tests of hydrogen-fueled supersonic combustors were performed using arc-heated air at combustor inlet Mach numbers of 2.9 to 3.2. Various axisymmetric combustor geometries of 5.89 and 6.96 cm (inner diameter) inlet were investigated; the fuel was injected from the wall either from a ring of equally spaced holes normal to the air stream, or from a circumferential slot oriented 45 deg downstream. The hole-type injectors consistently gave better results. The effects of various parameters are examined, and the performance comparison procedure is described. A theoretical model of the supersonic combustion process which includes a precombustion shock-compression is used to explain the character of the observed pressure distributions and to assess the effects of the measured heat transfer rates, deduced wall shear, and combustor geometry on performance.

Waltrup, P. J.↗
NASA NTRS1974

Measurement techniques for supersonic combustion testing

Measurement techniques used during nine years of intensive research in supersonic combustion are presented. The tests employed a number of combustor and injector configurations, which were directly connected to a Mach 3.2 supersonic nozzle, and both gaseous hydrogen and storable liquid fuels. Nominal plenum conditions for the arc-heated air were 3000 to 4500 R and 30 atm. Measurements included wall surface pressures, wall temperatures, heat flux, skin friction, instream cone-static and pitot pressures, and gas samples. Measurement and analysis techniques have been developed for determining total enthalpy of an airstream containing NO concentrations in excess of equilibrium using the two-throat technique, bulk combustion efficiency using steam calorimetry, radial gradients of fluid properties in the combustor exit plane using a stream tube method, and wall shear from measurements of heat transfer in a reacting supersonic flow using Reynolds analogy.

Orth, R. C.↗