Search NASA⌕ Search

Engineering topics

Bin, Liu

Publications and source records attributed to Bin, Liu.

At least 19 records

Interfacial study and energy-band alignment of annealed Al{sub 2}O{sub 3} films prepared by atomic layer deposition on 4H-SiC

Al{sub 2}O{sub 3} films were prepared by atomic layer deposition using trimethylaluminum and H{sub 2}O at 250 Degree-Sign C on 4H-SiC substrates and annealed at 1000 Degree-Sign C in N{sub 2}. The as-deposited and annealed Al{sub 2}O{sub 3} films were measured and analyzed near the Al{sub 2}O{sub 3}/SiC interfaces by using an X-ray photoelectron spectroscopy (XPS) with etching processing. The XPS results showed that as-deposited Al{sub 2}O{sub 3} films were O-rich and converted to anhydride Al{sub 2}O{sub 3} films after annealed at 1000 Degree-Sign C in N{sub 2}. Si suboxides were found both at as-deposited and annealed Al{sub 2}O{sub 3}/SiC interfaces. Energy band shift between Al{sub 2}O{sub 3} and 4H-SiC was found after annealing. The conduction band offsets of as-grown and annealed Al{sub 2}O{sub 3}/SiC were 1.90 and 1.53 eV, respectively. These results demonstrated that Al{sub 2}O{sub 3} can be a good candidate to be applied in SiC metal-oxide-semiconductor devices.

36 MATERIALS SCIENCE↗

Compensational scintillation detector with a flat energy response for flash X-ray measurements

To measure the intensity of flash X-ray sources directly, a novel scintillation detector with a fast time response and flat energy response is developed by combining film scintillators of doped ZnO crystal and fast organic scintillator together. Through compensation design, the dual-scintillator detector (DSD) achieved a flat energy response to X-rays from tens of keV to several MeV, and sub-nanosecond time response by coupling to ultrafast photo-electronic devices. A prototype detector was fabricated according to the theoretical design; it employed ZnO:In and EJ228 with thicknesses of 0.3 mm and 0.1 mm, respectively. The energy response of this detector was tested on monoenergetic X-ray and {gamma}-ray sources. The detector performs very well with a sensitivity fluctuation below 5% for 8 discrete energy points within the 40-250 keV energy region and for other energies of 662 keV and 1.25 MeV as well, showing good accordance with the theoretical design. Additionally, the detector works properly for the application to the flash X-ray radiation field absolute intensity measurement. This DSD may be very useful for the diagnosis of time-resolved dynamic physical processes of flash X-ray sources without knowing the exact energy spectrum.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The luminescence characteristics of CsI(Na) crystal under {alpha} and X/{gamma} excitation

In this paper, we study the effective decay time characteristic of CsI(Na) crystal under {sup 239}Pu alpha particle and {sup 137}Cs gamma-ray excitation using a single photon counting decay time measurement system. The measurement system employs a silicon optical fiber to couple and transit single photon. The slow decay time component of CsI(Na) crystal is 460-550 ns. We observe a 15 ns fast decay component under alpha particle excitation. In addition, we find that the primary stage of the falling edge in the decay time curve is non-exponential and drops rapidly when CsI(Na) crystal is excited by {sup 239}Pu alpha particles. Since the high density of self-trapped-excitons (STEs) is produced in alpha particle excitation process, we propose that the fast falling edge is corresponding to the quenching process of STEs which transit with non-radiation in the case of high excitation density. To prove this proposal, we excited the CsI(Na) crystal with sub-nanosecond intensive pulsed X-ray radiation. Our X-ray impinging results show that the fast falling edge also exists under low energy (average 100 keV) bremsstrahlung X-ray excitation.

36 MATERIALS SCIENCE↗

Crystal structures, fluorescent and magnetic properties of five new coordination polymers based on biphenyl-3,4 Prime ,5-tricarboxylic acid

Five new coordination polymers, {l_brace}[Cd{sub 3}(bpt){sub 2}(DMF){sub 2}]{center_dot}(H{sub 2}O){sub 2}{r_brace}{sub n} (1), [Cd(Hbpt)(bipy){sub 0.5}(H{sub 2}O)]{sub n} (2), [Cd{sub 2}(bpt)(phen){sub 2}Cl]{sub n} (3), {l_brace}[Cu{sub 2}(bpt)(phen)({mu}{sub 2}-OH)(H{sub 2}O)]{center_dot}(H{sub 2}O){sub 2}{r_brace}{sub n} (4) and {l_brace}[Mn{sub 5}(Hbpt){sub 4}(phen){sub 4}({mu}{sub 2}-OH){sub 2}(H{sub 2}O){sub 2}]{center_dot}(H{sub 2}O){sub 2}(CH{sub 3}CN){sub 2}{r_brace}{sub n} (5) have been prepared through hydro(solvo)thermal reactions of H{sub 3}bpt (H{sub 3}bpt=biphenyl-3,4 Prime ,5-tricarboxylic acid) with different pyridyl-containing auxiliary ligands (bipy=4,4 Prime -bipyridine and phen=1,10-phenanthroline). Compound 1 represents a 3D ladder-like framework composed of rod-shaped infinite chains. In 2, the bridging ligand bipy links binuclear cadmium ions to generate a 2D layer. Compound 3 features a 1D ladder structure and further linked by {pi}-{pi} stacking interaction to form a 3D supramolecular network. Compound 4 exhibits a binodal 3-connected net which features the Schlafli symbol of (4{center_dot}8{sup 2}). Compound 5 contains trimetallic cluster and binuclear unite which are further linked by Hbpt ligand to form a 2D layer. Moreover, photoluminescent properties of compounds 1-3 were studied in the solid state. Magnetic susceptibility measurements indicate that compound 4 exhibits ferromagnetic exchange interactions, whereas compound 5 displays antiferromagnetic exchange interactions. - Graphical abstract: Five new coordination polymers have been prepared through reactions of H{sub 3}bpt with different pyridyl-containing auxiliary ligands. The bpt exhibits four new kinds of coordination modes with 'V or Y shape'. Highlights: Black-Right-Pointing-Pointer 1 represents a unique (4{center_dot}8)-connected network with a Schlafli symbol (4{sup 6})(4{sup 12}{center_dot}6{sup 12}{center_dot}8{sup 4}). Black-Right-Pointing-Pointer Compound 4 shows ferromagnetic interaction between the dimeric Cu{sup 2+} units. Black-Right-Pointing-Pointer The bpt ligand exhibits four new kinds of coordination modes with 'V or Y shape'.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polygon construction to investigate melting in two-dimensional strongly coupled dusty plasma

The polygon construction method of Glaser and Clark is used to characterize melting and crystallization in a two-dimensional (2D) strongly coupled dusty plasma. Using particle positions measured by video microscopy, bonds are identified by triangulation, and unusually long bonds are deleted. The resulting polygons have three or more sides. Geometrical defects, which are polygons with more than three sides, are found to proliferate during melting. Pentagons are found in liquids, where they tend to cluster with other pentagons. Quadrilaterals are a less severe defect, so that disorder can be characterized by the ratio of quadrilaterals to pentagons. This ratio is found to be less in a liquid than in a solid or a superheated solid. Another measure of disorder is the abundance of different kinds of vertices, according to the type of polygons that adjoin there. Unexpectedly, spikes are observed in the abundance of certain vertex types during rapid temperature changes. Hysteresis, revealed by a plot of a disorder parameter vs temperature, is examined to study sudden heating. The hysteresis diagram also reveals features suggesting a possibility of latent heat in the melting and rapid cooling processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Viscosity calculated in simulations of strongly coupled dusty plasmas with gas friction

A two-dimensional strongly coupled dusty plasma is modeled using Langevin and frictionless molecular dynamical simulations. The static viscosity {eta} and the wave-number-dependent viscosity {eta}(k) are calculated from the microscopic shear in the random motion of particles. A recently developed method of calculating the wave-number-dependent viscosity {eta}(k) is validated by comparing the results of {eta}(k) from the two simulations. It is also verified that the Green-Kubo relation can still yield an accurate measure of the static viscosity {eta} in the presence of a modest level of friction as in dusty plasma experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Errors in particle tracking velocimetry with high-speed cameras

Velocity errors in particle tracking velocimetry (PTV) are studied. When using high-speed video cameras, the velocity error may increase at a high camera frame rate. This increase in velocity error is due to particle-position uncertainty, which is one of the two sources of velocity errors studied here. The other source of error is particle acceleration, which has the opposite trend of diminishing at higher frame rates. Both kinds of errors can propagate into quantities calculated from velocity, such as the kinetic temperature of particles or correlation functions. As demonstrated in a dusty plasma experiment, the kinetic temperature of particles has no unique value when measured using PTV, but depends on the sampling time interval or frame rate. It is also shown that an artifact appears in an autocorrelation function computed from particle positions and velocities, and it becomes more severe when a small sampling-time interval is used. Schemes to reduce these errors are demonstrated.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Two inorganic-organic hybrid materials based on polyoxometalate anions and methylene blue: Preparations, crystal structures and properties

Two novel inorganic-organic hybrid materials based on an organic dye cation methylene blue (MB) and Lindqvist-type POM polyanions, [C{sub 22}H{sub 18}N{sub 3}S]{sub 2}Mo{sub 6}O{sub 19} 2DMF (1) and [C{sub 22}H{sub 18}N{sub 3}S]{sub 2}W{sub 6}O{sub 19} 2DMF (2) were synthesized under ambient conditions and characterized by CV, IR spectroscopy, solid diffuse reflectance spectrum, UV-vis spectra in DMF solution, luminescent spectrum and single crystal X-ray diffraction. Crystallographic data reveal that compounds 1 and 2 are isostructural and both crystallize in the triclinic space group P1-bar . Their crystal structures present that the layers of organic molecules and inorganic anions array alternatively, and there exist strong {pi}...{pi} stacking interactions between dimeric MB cations and near distance interactions among organic dye cations, Lindqvist-type POM polyanions and DMF molecules. The solid diffuse reflectance spectra and UV-vis spectra in DMF solution appear new absorption bands ascribed to the charge-transfer transition between the cationic MB donor and the POM acceptors. Studies of the photoluminescent properties show that the formation of 1 and 2 lead to the fluorescence quenching of starting materials. -- Graphical abstract: Their crystal structures present that the layers of organic molecules and inorganic anions array alternatively, and there exist strong {pi}...{pi} stacking interactions between dimeric MB cations. Display Omitted

36 MATERIALS SCIENCE↗

A novel extended architecture with 4{sup 6}.6{sup 4} topology based on mixed-valence Wells-Dawson arsenotungstate and mixed-ligand Cu(I) units

A novel inorganic-organic hybrid compound based on mixed-valence Wells-Dawson arsenotungstate and mixed-ligand Cu(I) units, Cu{sub 8}{sup I}(imi){sub 4}(bpy){sub 6}(H{sub 2}O)[As{sub 2}{sup V}W{sub 2}{sup V}W{sub 16}{sup Vl}O{sub 62}].2H{sub 2}O (1) (bpy=4,4'-bipydine; imi=imidazole), has been hydrothermally synthesized and characterized by elemental analysis, IR spectroscopy, thermal gravimetric analysis, luminescent spectrum and single crystal X-ray diffraction. Single-crystal X-ray diffraction revealed that four terminal and three bridging oxygen atoms of the Wells-Dawson cluster are coordinated to Cu(I) ions and form an unprecedented hepta-supporting polyoxometalate. The functionalized arsenotungstates are further connected by two kinds of tridentate linkers, Imi-Cu-(bpy)-Cu-(bpy)-Cu-(bpy)-Cu-Imi and Imi-Cu-(bpy)-Cu-(bpy)-Cu-H{sub 2}O, to construct a 3D framework with 4{sup 6}.6{sup 4} topology. The hybrid material has an intense emission at about 397 nm. - Graphical abstract: A novel organic-inorganic hybrid compound based on mixed-valence Wells-Dawson arsenotungstate and mixed-ligand Cu(I) units has been successfully synthesized. The functionalized arsenotungstate exhibits a five-connected 4{sup 6}.6{sup 4} topology network.

36 MATERIALS SCIENCE↗

Identifying anomalous diffusion and melting in dusty plasmas

Anomalous diffusion in liquids and the solid-liquid phase transition (melting) are studied in two-dimensional Yukawa systems. The self-intermediate scattering function (self-ISF), calculated from simulation data, exhibits a temporal decay, or relaxation, with a characteristic relaxation time. This decay is found to be useful for distinguishing normal and anomalous diffusion in a liquid, and for identifying the solid-liquid phase transition. For liquids, a scaling of the relaxation time with length scale is found. For the solid-liquid phase transition, the shape of the self-ISF curve is found to be a sensitive indicator of phase. Friction has a significant effect on the timing of relaxation, but not the melting point.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mode Coupling for Phonons in a Single-Layer Dusty Plasma Crystal

New modes in a dusty plasma result from coupling of differently polarized phonons. A single horizontal layer of charged microparticles, confined so that vertical as well as horizontal motions are possible, usually exhibits three modes. An experiment shows that mode coupling leads to a new hybrid mode and another new mode. Coupling also leads to a recently reported hybrid mode and nondispersive mode, shown here to occur in an unmelted lattice. A linear theory based on ion wakes is able to predict some, but not all, of these modes. Other multiphase systems could exhibit similar mode coupling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Viscoelasticity of 2D Liquids Quantified in a Dusty Plasma Experiment

The viscoelasticity of two-dimensional liquids is quantified in an experiment using a dusty plasma. An experimental method is demonstrated for measuring the wave-number-dependent viscosity {eta}(k), which is a quantitative indicator of viscoelasticity. Using an expression generalized here to include friction, {eta}(k) is computed from the transverse current autocorrelation function, which is found by tracking random particle motion. The transverse current autocorrelation function exhibits an oscillation that is a signature of elastic contributions to viscoelasticity. Simulations of a Yukawa liquid are consistent with the experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dusty plasma diagnostics methods for charge, electron temperature, and ion density

Diagnostic methods are developed to measure the microparticle charge Q and two plasma parameters, electron temperature T{sub e}, and ion density n{sub i}, in the main plasma region of a dusty plasma. Using video microscopy to track microparticles yields a resonance frequency, which along with a charging model allows an estimation of Q and T{sub e}. Only measurements of microparticle position and velocity are required, unlike other methods that use measurements of T{sub e} and plasma parameters as inputs. The resonance frequency measurement can also be used with an ion drag model to estimate n{sub i}. These methods are demonstrated using a single-layer dusty plasma suspension under microgravity conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evolution of Shear-Induced Melting in a Dusty Plasma

The spatiotemporal development of melting is studied experimentally in a 2D dusty plasma suspension. Starting with an ordered lattice, and then suddenly applying localized shear, a pair of counterpropagating flow regions develop. A transition between two melting stages is observed before a steady state is reached. Melting spreads with a front that propagates at the transverse sound speed. Unexpectedly, coherent longitudinal waves are excited in the flow region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shapiro-like resonance in ultracold molecule production via an oscillating magnetic field

We study the process of the production of ultracold molecules from ultracold atoms using a sinusoidally oscillating magnetic-field modulation. Our study is based on a two-mode mean-field treatment of the problem. When the magnetic field is resonant roughly with the molecular binding energy, Shapiro-like resonances are observed. Their resonance profiles are well fitted by the Lorentzian functions. The linewidths depend on both the amplitude and the duration of the applied modulations and are found to be dramatically broadened by the thermal dephasing effect. The resonance centers shift due to both the many-body effect and the finite temperature effect. Our theory is consistent with a recent experiment [S. T. Thompson, E. Hodby, and C. E. Wieman, Phys. Rev. Lett. 95, 190404 (2005)]. Our model predicts a 1/3 ceiling for the molecular production yield in uncondensed ultracold atomic clouds for a long coupling time, while for condensed atoms the optimal conversion yield could be beyond the limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Convective heat transfer in the laminar-turbulent transition region with molten salt in a circular tube

In order to understand the heat transfer characteristics of molten salt and testify the validity of the well-known empirical convective heat transfer correlations, experimental study on transition convective heat transfer with molten salt in a circular tube was conducted. Molten salt circulations were realized and operated in a specially designed system over 1000 h. The average forced convective heat transfer coefficients of molten salt were determined by least-squares method based on the measured data of flow rates and temperatures. Finally, a heat transfer correlation of transition flow with molten salt in a circular tube was obtained and good agreement was observed between the experimental data of molten salt and the well-known correlations presented by Hausen and Gnielinski, respectively. (author)

36 MATERIALS SCIENCE↗

Solid Superheating Observed in Two-Dimensional Strongly Coupled Dusty Plasma

It is demonstrated experimentally that strongly coupled plasma exhibits solid superheating. A 2D suspension of microspheres in dusty plasma, initially self-organized in a solid lattice, was heated and then cooled rapidly by turning laser heating on and off. Particles were tracked using video microscopy, allowing atomistic-scale observation during melting and solidification. During rapid heating, the suspension remained in a solid structure at temperatures above the melting point, demonstrating solid superheating. Hysteresis diagrams did not indicate liquid supercooling in this 2D system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗