Search NASA⌕ Search

Engineering topics

Biner, S. B.

Publications and source records attributed to Biner, S. B..

Pore and grain boundary migration under a temperature gradient: A phase-field model study

In this study, the collective migration behavior of pores and grain boundaries under a temperature gradient is studied for simple single crystal, bi-crystal and polycrystal configurations with a phase-field model formulism. For simulation of the microstructure of solids, composed of pores and grain boundaries, the results indicate that not only the volume fraction of pores, but also its spatial partitioning between the grain boundary junctions and the grain boundary segments appears to be important. In addition to various physical properties, the evolution kinetics, under given temperature gradients, will be strongly influenced with the initial morphology of a poly-crystalline microstructure.

36 MATERIALS SCIENCE↗

Nuclear Fuels & Materials Spotlight Volume 4

As the nation's nuclear energy laboratory, Idaho National Laboratory brings together talented people and specialized nuclear research capability to accomplish our mission. This edition of the Nuclear Fuels and Materials Division Spotlight provides an overview of some of our recent accomplishments in research and capability development. These accomplishments include: • The first identification of silver and palladium migrating through the SiC layer in TRISO fuel • A description of irradiation assisted stress corrosion testing capabilities that support commercial light water reactor life extension • Results of high-temperature safety testing on coated particle fuels irradiated in the ATR • New methods for testing the integrity of irradiated plate-type reactor fuel • Description of a 'Smart Fuel' concept that wirelessly provides real time information about changes in nuclear fuel properties and operating conditions • Development and testing of ultrasonic transducers and real-time flux sensors for use inside reactor cores, and • An example of a capsule irradiation test. Throughout Spotlight, you'll find examples of productive partnerships with academia, industry, and government agencies that deliver high-impact outcomes. The work conducted at Idaho National Laboratory helps to spur innovation in nuclear energy applications that drive economic growth and energy security. We appreciate your interest in our work here at INL, and hope that you find this issue informative.

99 GENERAL AND MISCELLANEOUS↗

Consideration of Grain Size Distribution in the Diffusion of Fission Gas to Grain Boundaries

We analyze the accumulation of fission gas on grain boundaries in a polycrystalline microstructure with a distribution of grain sizes. The diffusion equation is solved throughout the microstructure to evolve the gas concentration in space and time. Grain boundaries are treated as infinite sinks for the gas concentration, and we monitor the cumulative gas inventory on each grain boundary throughout time. We consider two important cases: first, a uniform initial distribution of gas concentration without gas production (correlating with post-irradiation annealing), and second, a constant gas production rate with no initial gas concentration (correlating with in-reactor conditions). The results show that a single-grain-size model, such as the Booth model, over predicts the gas accumulation on grain boundaries compared with a polycrystal with a grain size distribution. Also, a considerable degree of scatter, or variability, exists in the grain boundary gas accumulation when comparing all of the grain boundaries in the microstructure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Comparison between phase field simulations and experimental data from intragranular bubble growth in UO{sub 2}

In this work, we used the phase field method to simulate the post-irradiation annealing of UO{sub 2} described in the experimental work by Kashibe et al., 1993 [1]. The simulations were carried out in 2D and 3D using the MARMOT FEM-based phase-field modeling framework. The 2-D results compared fairly well with the experiments, in spite of the assumptions made in the model. The 3-D results compare even more favorably to experiments, indicating that diffusion in all three directions must be considered to accurate represent the bubble growth. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Intergranular fracture in UO{sub 2}: derivation of traction-separation law from atomistic simulations

In this study, the intergranular fracture behavior of UO{sub 2} was studied by molecular dynamics simulations using the Basak potential. In addition, the constitutive traction-separation law was derived from atomistic data using the cohesive-zone model. In the simulations a bicrystal model with the (100) symmetric tilt Σ5 grain boundaries was utilized. Uniaxial tension along the grain boundary normal was applied to simulate Mode-I fracture. The fracture was observed to propagate along the grain boundary by micro-pore nucleation and coalescence, giving an overall intergranular fracture behavior. Phase transformations from the Fluorite to the Rutile and Scrutinyite phases were identified at the propagating crack tips. These new phases are metastable and they transformed back to the Fluorite phase at the wake of crack tips as the local stress concentration was relieved by complete cracking. Such transient behavior observed at atomistic scale was found to substantially increase the energy release rate for fracture. Insertion of Xe gas into the initial notch showed minor effect on the overall fracture behavior. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Guidance to Design Grain Boundary Mobility Experiments with Molecular Dynamics and Phase-Field Modeling

Quantitative phase-field modeling can play an important role in designing experiments to measure the grain boundary (GB) mobility. In this work, molecular dynamics (MD) simulation is employed to determine the GB mobility using Cu bicrystals. Two grain configurations are considered: a shrinking circular grain and a half loop grain. The results obtained from the half loop configuration approaches asymptotically to that obtained from the circular configuration with increasing half loop width. We then verify the phase- field model by directly comparing to the MD simulation results, obtaining excellent agreement. Next, this phase-field model is used to predict the behavior in a common experimental setup that utilizes a half loop grain configuration in a bicrystal to measure the GB mobility. With a 3D simulation, we identify the two critical times within the experiments to reach an accurate value of the GB mobility. We use a series of 2D simulations to investigate the impact of the notch angle on these two critical times and we identify an angle of 60? as an optimal value. We also show that if the notch does not have a sharp tip, it may immobilize the GB migration indefinitely.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗