Search NASA⌕ Search

Engineering topics

Biolsi, L.

Publications and source records attributed to Biolsi, L..

The reactive thermal conductivity of air at high temperatures

This paper presents the thermal conductivity of air from the dissociation and ionization reactions of the nitrogen and oxygen species in air from 1000 K to 25,000 K. The results for nitrogen are compared with results for the nonreactive (frozen) contribution to the thermal conductivity of the 'nitrogen system' (N2, N, N/+/, and the electron, e). At 6000 K, the contribution to the thermal conductivity from the dissociation of N2 is more than an order of magnitude greater than the frozen thermal conductivity and, at 15,000 K, the contribution to the thermal conductivity from the ionization of nitrogen atoms is about as large as the contribution from the frozen thermal conductivity.

Biolsi, L.↗

Transport properties for some atom-ion interactions in air

The thermal conductivity and viscosity for the N-N(+) and O-O(+) interactions have been calculated, using the kinetic theory of gases, from 500 K-20,000 K. Accurate spectroscopically determined potentials have been used for the calculations. The results are compared with previous results obtained using less accurate potentials.

Biolsi, L.↗

Transport properties of ground state nitrogen atoms

In view of the dependence of the transport properties of dilute monatomic gases on the two-body, atom-atom interaction potential, any one of four potential energy curves corresponding to the N2 molecule can be followed when two ground state N atoms interact. Transport collision integrals for the 1Sigma(+)g and 3Sigma(+)u states have been calculated by representing their potentials with the Hulburt-Hirschfelder (1941, 1961) potential. The 5Sigma(+)g state has a large local maximum requiring changes in a previously used computational procedure, and its potential has also been represented by a Hulburt-Hirschfelder potential. Collision integrals for the 7Sigma(+)u state have been obtained through the direct use of a recently proposed theoretical potential for this state. The collision integrals are compared with results gathered from previous studies.

Rainwater, J. C.↗

Transport properties for the nitrogen system - N2, N, N(+) and E

The transport properties of the 'nitrogen system' (N2, N, N(+), and e) are important in a variety of applications, including atmospheric entry of the Shuttle and other re-entry vehicles. The kinetic theory of gases has been used to calculate the conductive transport properties for this system. The best available two-body interaction potentials have been used to calculate the transport collision integrals for each of the ten interactions which can occur in this system. Results are presented for the pure species and for the gas mixture from 600K-14000K.

Biolsi, L.↗

Transport properties associated with carbon-phenolic ablators

Entry vehicle heat shields designed for entry into the atmosphere of the outer planets are usually made of carbonaceous material such as carbon-phenolic ablator. Ablative injection of this material is an important mechanism for reducing the heat at the surface of the entry vehicle. Conductive transport properties in the shock layer are important for some entry conditions. The kinetic theory of gases has been used to calculate the transport properties for 17 gaseous species obtained from the ablation of carbon-phenolic heat shields. Results are presented for the pure species and for the gas mixture.

Biolsi, L.↗

Transport properties for a mixture of the ablation products C, C2, and C3

The ablation of carbon-phenolic heat shields upon entry into the atmosphere of one of the outer planets leads to the injection of large amounts of C, C2, and C3 into the shock layer. These species must be included in the calculation of transport properties in the shock layer. The kinetic theory of gases has been used to obtain accurate results for the transport properties of monatomic carbon. The Hulburt-Hirschelder potential, the most accurate general purpose atom-atom potential for states with an attractive minimum, was used to represent such states and repulsive states were represented by fitting quantum mechanical potential energy curves with the exponential repulsive potential. These results were orientation averaged according to the peripheral force model to obtain transport collision integrals for the C-C2 and C2-C2 interaction. Results for C3 were obtained by ignoring the presence of the central carbon atom. The thermal conductivity, viscosity, and diffusion coefficients for pure C, C2, and C3, and for mixtures of these gases, were then calculated from 1000 K - 25,000 K.

Biolsi, L.↗

Transport properties associated with entry into the atmosphere of Titan

In this paper the transport properties in the atmosphere of Titan and at the shock front and the probe surface for non-ablative entry into Titan's atmosphere are calculated, using the kinetic theory of gases. The species N2, H2, CH4, HCN, N, and H contribute to the transport properties under these conditions. The transport properties were calculated by using accurate potential energy curves for each of the thirteen two-body interactions which occur between these species. Results are given for the binary diffusion coefficients, the non-reactive and reactive thermal conductivity, and the viscosity from 1000 K to 8000 K. This information is needed for calculating flowfield properties and surface heating rates. The most important conclusions are that the non-reactive thermal conductivity is much larger behind the shock layer than it is in the ambient atmosphere and that the nonreactive thermal conductivity appears to be nearly constant in the shock layer.

Flori, B.↗

Transport properties of monatomic carbon. II - Contributions from excited electronic states

The aim of the present analysis is to verify the conventional assumption that the transport properties of atoms and molecules in excited electronic states are nearly the same as in the ground state. Reasonably exact calculations of the transport properties of excited-state carbon atoms are obtained on the basis of available experimental and theoretical data on the interactions between carbon atoms in excited electronic states. A comparison with results obtained with several models that have been used to estimate the transport properties of excited species indicates that the assumption under consideration is correct, but that the models do not predict very accurately the transport properties of excited species.

Biolsi, L.↗

Transport properties of monatomic carbon

Transport collision integrals for each of the 18 molecular C2 states that dissociate into ground state carbon atoms are presented. The integrals are obtained by fitting two-body semiempirical interaction potentials, for which the collision integrals are tabulated, to experimental and/or accurate theoretical calculations for each of these states. The collision integrals are applied to calculate the diffusion coefficient, viscosity, and translational contribution to the thermal conductivity of monatomic carbon at 1-atm pressure from 1000 K to 25,000 K. Because of ablation injection, monatomic carbon is an important flow field constituent of ablative flow during planetary entry, and knowledge of the transport properties for carbon species is required for calculating the flow field properties and surface heating.

Biolsi, L.↗

Some effects of ablation on transport properties in the Jovian atmosphere

In this paper the transport properties at the inner and outer boundary for mixing between ablation products and a Jovian-like atmosphere are calculated. The dominant species at these boundaries are C, H, O, He, H+, and e. Accurate potential energy curves are obtained for the fifteen possible two-body interactions among these species by fitting good semiempirical potentials for which transport collision cross sections have been tabulated to accurate experimental and theoretical information. Results are obtained for the viscosity and translational thermal conductivity of the pure species and the binary diffusion coefficients from 1000 K to 25,000 K. In addition, the mixture translational thermal conductivity and viscosity are calculated at the inner and outer mixing boundaries. This information is required for calculating flowfield properties and surface heating. The most important conclusion is that the translational thermal conductivity is substantially lower at the inner mixing boundary than it is at the outer mixing boundary.

Biolsi, L.↗

Transport properties in the Jovian atmosphere

Transport properties in a Jupiter-like atmosphere (89 mol % hydrogen and 11 mol % helium) are obtained by using the method of the kinetic theory of gases. The transport collision integrals are calculated by fitting various two-body semiempirical interaction potentials for which the collision integrals are tabulated to ab initio quantum mechanical calculations of the two-body interactions. The collision integrals are used to calculate the binary diffusion coefficients, viscosity, and 'total' thermal conductivity of the pure gases and the gas mixtures at 1-atm pressure from 1000 K to 25,000 K.

Biolsi, L.↗

Effect of molecular angular momentum on the thermal conductivity of a multicomponent gas mixture

The effects of molecular angular momentum (spin polarization) on the thermal conductivity of a multicomponent gas mixture are considered. The Wang Chang-Uhlenbeck approach to the kinetic theory of gases with internal states is used. Formal results are obtained for the thermal conductivity of a gas mixture of uniform composition. These results are given in terms of the quantum mechanical degeneracy-averaged cross section.

Biolsi, L.↗