Search NASA⌕ Search

Engineering topics

Bisht, Gautam

Publications and source records attributed to Bisht, Gautam.

At least 19 records

Impacts of Sea‐Level Rise on Coastal Groundwater Table Simulated by an Earth System Model With a Land‐Ocean Coupling Scheme

Abstract Sea‐level rise (SLR) poses a severe threat to the coastal environment through seawater intrusion into freshwater aquifers. The rising groundwater table also exacerbates the risk of pluvial, fluvial, and groundwater flooding in coastal regions. However, current Earth system models (ESMs) commonly ignore the exchanges of water at the land‐ocean interface. To address this gap, we developed a novel land‐ocean hydrologic coupling scheme in a state‐of‐the‐science ESM, the Energy Exascale Earth System Model version 2 (E3SMv2). The new scheme includes the lateral exchange between seawater and groundwater and the vertical infiltration of seawater driven by the SLR‐induced inundation. Simulations were performed with the updated E3SMv2 for the global land‐ocean interface to assess the impacts of SLR on coastal groundwater under a high CO 2 emission scenario. By the middle of this century, seawater infiltration on the inundated areas will be the dominant component in the land‐ocean coupling process, while the lateral subsurface flow exchange will be much smaller. The SLR‐induced seawater infiltration will raise the groundwater levels, enhance evapotranspiration, and increase runoff with distinct spatial patterns globally in the future. Although the coupling process is induced by SLR, we found topography and warming temperature have more control on the coupling impacts, probably due to the relatively modest magnitude of SLR during the selected future period. Overall, our study suggests significant groundwater and seawater exchange at the land‐ocean interface, which needs to be considered in ESMs.

54 ENVIRONMENTAL SCIENCES↗

River–aquifer interactions enhancing evapotranspiration in a semiarid riparian zone: A modelling study

The hydrologic flows across the river–aquifer interface play an important role in groundwater dynamics and biogeochemical reactions within the subsurface; however, little is known about the effects of river–aquifer interactions on land surface processes. In this study, we developed a fully coupled three-dimensional (3D) land surface and subsurface model at a high resolution (~1 km) that accounts for high-frequency hydrologic exchange flow conditions to investigate how river–aquifer interactions modulate surface water budgets in the Upper Columbia-Priest Rapids watershed, a typical semiarid watershed located in the northwestern United States where river stage fluctuates in response to reservoir releases changing. Our results show that the spatiotemporal dynamics of river–aquifer interactions are highly heterogeneous, driven mainly by river-stage fluctuations. Adding 6.64 × 10 6 m 3 year –1 of water over the watershed from the river to groundwater owing to the lateral flow, river–aquifer interactions led to an increase in soil evaporation and transpiration supplied by higher soil moisture content, particularly in deeper subsurface. In a hypothetic future scenarios where a 5-m rise in river stage was assumed, the hydrologic flow exchange rates were intensified, resulting in higher surface water over the entire watershed. Overall, lateral flow induced by river–aquifer exchanges leads to an increase in evapotranspiration of ~75% in the historical period and of ~83% in the hypothetical future scenario. Finally, our study demonstrates the potential of coupled model as an effective tool for understanding river–aquifer–land surface interactions, and indicates that river–aquifer interactions fundamentally alter the water balance of the riparian zone for the semiarid watershed and will likely become more frequent and intense in the future under the effects of climate change.

54 ENVIRONMENTAL SCIENCES↗

Development of a multi-layer canopy model for E3SM Land Model with support for heterogeneous computing

The vertical structure of vegetation canopies creates micro-climates. However, the land components of most Earth System Models, including the Energy Exascale Earth System Model (E3SM), typically neglect vertical canopy structure by using a single layer big-leaf representation to simulate water, CO 2 , and energy exchanges between the land and the atmosphere. In this study, we developed a Multi-Layer Canopy Model for the E3SM Land Model to resolve the micro-climate created by vegetation canopies. The model developed in this study re-implements the CLM-ml_v1 to support heterogeneous computing architectures consisting of CPUs and GPUs and includes three additional optimization-based stomatal conductance models. The use of Portable, Extensible Toolkit for Scientific Computation provides a speedup of 25–50 times on a GPU relative to a CPU. The numerical implementation of the model was verified against CLM-ml_v1 for a month-long simulation using data from the Ameriflux US-University of Michigan Biological Station site. Model structural uncertainty was explored by performing control simulations for five stomatal conductance models that exclude and include the control of plant hydrodynamics (PHD) on photosynthesis. The bias in simulated sensible and latent heat fluxes was lower when PHD was accounted for in the model. Additionally, six idealized simulations were performed to study the impact of three environmental variables (i.e. air temperature, atmospheric CO 2 , and soil moisture) on canopy processes (i.e. net CO 2 assimilation, leaf temperature, and leaf water potential). Increasing air temperature reduced net CO 2 assimilation and increased air temperature. Net CO 2 assimilation increased at higher atmospheric CO 2 , while decreasing soil moisture resulted in lower leaf water potential.

54 ENVIRONMENTAL SCIENCES↗

Simulation of Compound Flooding Using River‐Ocean Two‐Way Coupled E3SM Ensemble on Variable‐Resolution Meshes

Abstract Coastal zone compound flooding (CF) can be caused by the interactive fluvial and oceanic processes, particularly when coastal backwater propagates upstream and interacts with high river discharge. The modeling of CF is limited in existing Earth System Models (ESMs) due to coarse mesh resolutions and one‐way coupled river‐ocean components. In this study, we present a novel multi‐scale coupling framework within the Energy Exascale Earth System Model (E3SM), integrating global atmosphere and land with interactively coupled river and ocean models using different meshes with refined resolutions near the coastline. To evaluate this framework, we conducted ensemble simulations of a CF event (Hurricane Irene in 2011) in a Mid‐Atlantic estuary. The results demonstrate that the novel E3SM configuration can reasonably reproduce river discharge and sea surface height variations. The two‐way river‐ocean coupling improves the representation of coastal backwater effects at the terrestrial‐aquatic interface that are caused by the combined actions of tide and storm surge during the CF event, thus providing a valuable modeling tool for better understanding the river‐estuary‐ocean dynamics in extreme events under climate change. Notably, our results show that the most significant CF impacts occur when the highest storm surge generated by a tropical cyclone meets with a moderate river discharge. This study highlights the state‐of‐the‐art advancements developed within E3SM for simulating multi‐scale coastal processes.

54 ENVIRONMENTAL SCIENCES↗

Global 1 km land surface parameters for kilometer-scale Earth system modeling

Earth system models (ESMs) are progressively advancing towards the kilometer scale (“k-scale”). However, the surface parameters for land surface models (LSMs) within ESMs running at the k-scale are typically derived from coarse-resolution and outdated datasets. This study aims to develop a new set of global land surface parameters with a resolution of 1 km for multiple years from 2001 to 2020, utilizing the latest and most accurate available datasets. Specifically, the datasets consist of parameters related to land use and land cover, vegetation, soil, and topography. Differences between the newly developed 1 km land surface parameters and conventional parameters emphasize their potential for higher accuracy due to the incorporation of the most advanced and latest data sources. To demonstrate the capability of these new parameters, we conducted 1 km resolution simulations using the E3SM Land Model version 2 (ELM2) over the contiguous United States. Our results demonstrate that land surface parameters contribute to significant spatial heterogeneity in ELM2 simulations of soil moisture, latent heat, emitted longwave radiation, and absorbed shortwave radiation. On average, about 31 % to 54 % of spatial information is lost by upscaling the 1 km ELM2 simulations to a 12 km resolution. Using eXplainable Machine Learning (XML) methods, the influential factors driving the spatial variability and spatial information loss of ELM2 simulations were identified, highlighting the substantial impact of the spatial variability and information loss of various land surface parameters, as well as the mean climate conditions. The comparison against four benchmark datasets indicates that ELM generally performs well in simulating soil moisture and surface energy fluxes. The new land surface parameters are tailored to meet the emerging needs of k-scale LSM and ESM modeling with significant implications for advancing our understanding of water, carbon, and energy cycles under global change. The 1 km land surface parameters are publicly available at https://doi.org/10.5281/zenodo.10815170 (Li et al., 2024).

54 ENVIRONMENTAL SCIENCES↗

Regional and Teleconnected Impacts of Solar Radiation‐Topography Interaction Over the Tibetan Plateau

Abstract Solar radiation‐topography interaction plays an important role in surface energy balance over the Tibetan Plateau (TP). However, the impacts of such interaction over the TP on climate locally and in the Asian regions remain unclear. This study uses the Energy Exascale Earth System Model (E3SM) to evaluate the regional and teleconnected impacts of solar radiation‐topography interaction over the TP. Land‐atmosphere coupled experiments show that topography regulates the surface energy balance, snow processes, and surface climate over the TP across seasons. Accounting for solar radiation‐topography interaction improves E3SM simulation of surface climate. The winter cold bias in air temperature decreases from −4.57 to −3.79 K, and the wet bias in summer precipitation is mitigated in southern TP. The TP's solar radiation‐topography interaction further reduces the South and East Asian summer precipitation biases. Our results demonstrate the topographic roles in regional climate over the TP and highlight its teleconnected climate impacts.

54 ENVIRONMENTAL SCIENCES↗

Topological Relationship-Based Flow Direction Modeling: Stream Burning and Depression Filling

Flow direction modeling consists of (a) an accurate representation of the river network and (b) digital elevation model (DEM) processing to preserve characteristics with hydrological significance. In part 1 of our study, we presented a mesh-independent approach to representing river networks on different types of meshes. This follow-up part 2 study presents a novel DEM processing approach for flow direction modeling. This approach consists of (a) a topological relationship-based hybrid breaching-filling method to conduct stream burning for the river network and (b) a modified depression removal method for rivers and hillslopes. Our methods reduce modifications to surface elevations and provide a robust two-step procedure to remove local depressions in DEM. They are mesh-independent and can be applied to both structured and unstructured meshes. We applied our new methods with different model configurations to the Susquehanna River Basin. The results show that topological relationship-based stream burning, and depression-filling methods can reproduce the correct river networks, providing high-quality flow direction and other characteristics for hydrologic and Earth system models.

54 ENVIRONMENTAL SCIENCES↗

Data, scripts, and figures associated with a manuscript studying impact of climate and topography on post-fire vegetation recovery.

This data package is associated with the publication “Impact of Topography and Climate on Post-fire Vegetation Recovery Across Different Burn Severity and Land Cover Types through Machine Learning” submitted to Remote Sensing of Environment (Zahura et al. 2023). In this research, a machine learning algorithm, random forest (RF), was utilized to examine the impact of climate and topography on post-fire vegetation recovery. We used enhanced vegetation index (EVI) to examine varying burn severity and land cover types. The data package includes the input files for RF model training, outputs from model predictions and analysis, and python scripts to run the model, analyze the results to understand model performance and interpretability, and plot manuscript figures. This data package contains three folders (Data, Scripts, and Figures), a file-level metadata (FLMD) csv, and a data dictionary (dd) csv. Please see Postfire_recovery_flmd.csv for a list of all files contained in this data package and descriptions for each. The data dictionary (Postfire_recovery_dd.csv) describes the csv column headers. The “Data” folder provides all the inputs and outputs to train the RF model, evaluate performance, and interpret predictions. The “Scripts” folder contains python scripts and jupyter notebooks for model training and result analysis. The “Figures” folder includes the figures used in the manuscript in “.png” and “.jpg” format.

54 ENVIRONMENTAL SCIENCES↗

PFLOTRAN 5

PFLOTRAN leverages massively parallel, high performance computing to simulate large-scale non-isothermal multiphase flow, multicomponent reactive transport and electrical resistivity tomography (ERT) problems in the subsurface environment. Researchers have employed PFLOTRAN to simulate these Earth system processes on leadership class supercomputers for over two decades. The code is designed to predict the future estate of environmental systems and better inform stakeholders in the regulatory decision making process (e.g., fate of contaminants, long-term stewardship for nuclear waste, impact of climate change, etc.). A diverse team of scientists oversees PFLOTRAN development and maintenance under an open-source licensing agreement and manages contributions from an international community of researchers.

Hammond, Glenn↗

A cleaner snow future mitigates Northern Hemisphere snowpack loss from warming

Abstract Light-absorbing particles (LAP) deposited on seasonal snowpack can result in snow darkening, earlier snowmelt, and regional climate change. However, their future evolution and contributions to snowpack change relative to global warming remain unclear. Here, using Earth System Model simulations, we project significantly reduced black carbon deposition by 2081-2100, which reduces the December-May average LAP-induced radiative forcing in snow over the Northern Hemisphere from 1.3 Wm −2 during 1995-2014 to 0.65 (SSP126) and 0.49 (SSP585) Wm −2 . We quantify separately the contributions of climate change and LAP evolution on future snowpack and demonstrate that projected LAP changes in snow over the Tibetan Plateau will alleviate future snowpack loss due to climate change by 52.1 ± 8.0% and 8.0 ± 1.1% at the end of the century for the two scenarios, mainly due to reduced black carbon contamination. Our findings highlight a cleaner snow future and its benefits for future water supply from snowmelt especially under the sustainable development pathway of SSP126.

54 ENVIRONMENTAL SCIENCES↗

The Impact of Crop Rotation and Spatially Varying Crop Parameters in the E3SM Land Model (ELMv2)

Abstract Earth System Models (ESMs) are increasingly representing agriculture due to its impact on biogeochemical cycles, local and regional climate, and fundamental importance for human society. Realistic large scale simulations may require spatially varying crop parameters that capture crop growth at various scales and among different cultivars, as well as common crop management practices, but their importance is uncertain, and they are often not represented in ESMs. In this study, we examine the impact of using constant versus spatially varying crop parameters using a novel, realistic crop rotation scenario in the Energy Exascale Earth System Model (E3SM) Land Model version 2 (ELMv2). We implemented crop rotation by using ELMv2's dynamic land unit capability, and then calibrated and validated the model against observations collected at three AmeriFlux sites in the US Midwest with corn soybean rotation. The calibrated model closely captured the magnitude and observed seasonality of carbon and energy fluxes across crops and sites. We performed regional simulations for the US Midwest using the calibrated model and found that spatially varying only a few crop parameters across the region, as opposed to using constant parameters, had a large impact, with the carbon fluxes and energy fluxes both varying by up to 40%. These results imply that large scale ESM simulations using spatially invariant crop parameters may result in biased energy and carbon fluxes estimation from agricultural land, and underline the importance of improving human‐earth systems interactions in ESMs.

54 ENVIRONMENTAL SCIENCES↗

Improving snow albedo modeling in the E3SM land model (version 2.0) and assessing its impacts on snow and surface fluxes over the Tibetan Plateau

With the highest albedo of the land surface, snow plays a vital role in Earth's surface energy budget and water cycle. Snow albedo is primarily controlled by snow grain properties (e.g., size and shape) and light-absorbing particles (LAPs) such as black carbon (BC) and dust. The mixing state of LAPs in snow also has impacts on LAP-induced snow albedo reduction and surface radiative forcing (RF). However, most land surface models assume that snow grain shape is spherical and LAPs are externally mixed with the snow grains. This study improves the snow radiative transfer model in the Energy Exascale Earth System Model version 2.0 (E3SM v2.0) Land Model (ELM v2.0) by considering non-spherical snow grain shapes (i.e., spheroid, hexagonal plate, and Koch snowflake) and internal mixing of dust–snow, and it systematically evaluates the impacts on the surface energy budget and water cycle over the Tibetan Plateau (TP). A series of ELM simulations with different treatments of snow grain shape, mixing state of BC–snow and dust–snow, and sub-grid topographic effects (TOP) on solar radiation are performed. Compared with two remote sensing snow products derived from the Moderate Resolution Imaging Spectroradiometer, the control ELM simulation (ELM_Control) with the default configurations of spherical snow grain shape, internal mixing of BC–snow, external mixing of dust–snow, and without TOP as well as the ELM simulation with new model features (ELM_New) can both capture the overall snow distribution reasonably. Additionally, ELM_New overall shows smaller biases in snow cover fraction than ELM_Control in spring when snowmelt is important for water management. The estimated LAP-induced RF in ELM_New ranges from 0 to 19.3 W m -2 with the area-weighted average value of 1.5 W m -2 that is comparable to the reported values in existing studies. The Koch snowflake shape, among other non-spherical shapes, shows the largest difference from the spherical shape in spring when snow processes related to the surface energy budget and water cycle have high importance. The impacts of the mixing state of LAP in snow are smaller than the shape effects and depend on snow grain shape. Compared to external mixing, internal mixing of LAP–snow can lead to larger snow albedo reduction and snowmelt, which further affect the surface energy budget and water cycle. The individual contributions of non-spherical snow shape, mixing state of LAP–snow, and local topography impacts on the snow and surface fluxes have different signs and magnitudes, and their combined effects may be negative or positive due to complex and nonlinear interactions among the factors. Overall, the changes in net solar radiation in spring due to individual and combined effects range from -28.6 to 16.9 W m -2 and -29.7 to 12.2 W m -2 , respectively. This study advances understanding of the role of snow grain shape and mixing state of LAP–snow in land surface processes and offers guidance for improving snow simulations and RF estimates in Earth system models under climate change.

58 GEOSCIENCES↗

The DOE E3SM Model Version 2: Overview of the Physical Model and Initial Model Evaluation

Abstract This work documents version two of the Department of Energy's Energy Exascale Earth System Model (E3SM). E3SMv2 is a significant evolution from its predecessor E3SMv1, resulting in a model that is nearly twice as fast and with a simulated climate that is improved in many metrics. We describe the physical climate model in its lower horizontal resolution configuration consisting of 110 km atmosphere, 165 km land, 0.5° river routing model, and an ocean and sea ice with mesh spacing varying between 60 km in the mid‐latitudes and 30 km at the equator and poles. The model performance is evaluated with Coupled Model Intercomparison Project Phase 6 Diagnosis, Evaluation, and Characterization of Klima simulations augmented with historical simulations as well as simulations to evaluate impacts of different forcing agents. The simulated climate has many realistic features of the climate system, with notable improvements in clouds and precipitation compared to E3SMv1. E3SMv1 suffered from an excessively high equilibrium climate sensitivity (ECS) of 5.3 K. In E3SMv2, ECS is reduced to 4.0 K which is now within the plausible range based on a recent World Climate Research Program assessment. However, a number of important biases remain including a weak Atlantic Meridional Overturning Circulation, deficiencies in the characteristics and spectral distribution of tropical atmospheric variability, and a significant underestimation of the observed warming in the second half of the historical period. An analysis of single‐forcing simulations indicates that correcting the historical temperature bias would require a substantial reduction in the magnitude of the aerosol‐related forcing.

54 ENVIRONMENTAL SCIENCES↗

Development of Land‐River Two‐Way Hydrologic Coupling for Floodplain Inundation in the Energy Exascale Earth System Model

Abstract Floodplain inundation links river and land systems through significant water, sediment, and nutrient exchanges. However, these two‐way interactions between land and river are currently missing in most Earth System Models. In this study, we introduced the two‐way hydrological coupling between the land component, E3SM Land Model, and the river component, Model for Scale Adaptive River Transport, in Energy Exascale Earth System Model (E3SM) to study the impacts of floodplain inundation on land and river processes. We calibrated the river channel geometry and developed a new data‐driven inundation scheme to improve the simulation of inundation dynamics in E3SM. The new inundation scheme captures 96% of the spatial variation of inundation area in a satellite inundation product at global scale, in contrast with 7% when the default inundation scheme of E3SM was used. Global simulations including the new inundation scheme performed at resolution with and without land‐river two‐way coupling was used to quantify the impact of coupling. Comparisons show that two‐way coupling modifies the water and energy cycle in 20% of the global land cells. Specifically, riverine inundation is reduced by two‐way coupling, but inland inundation is intensified. Wetter periods are more impacted by the two‐way coupling at the global scale, while regions with different climates exhibit different sensitivities. The two‐way exchange of water between the land and river components of E3SM provides the foundation for enabling two‐way coupling of land‐river sediment and biogeochemical fluxes. These capabilities will be used to improve understanding of the interactions between water and biogeochemical cycles and their response to human perturbations.

54 ENVIRONMENTAL SCIENCES↗

Impacts of Sub‐Grid Topographic Representations on Surface Energy Balance and Boundary Conditions in the E3SM Land Model: A Case Study in Sierra Nevada

Abstract Sub‐grid topographic heterogeneity has large impacts on surface energy balance and land‐atmosphere interactions. However, the impacts of representing sub‐grid topographic effects in land surface models (LSMs) on surface energy balance and boundary conditions remain unclear. This study analyzed and evaluated the impacts of sub‐grid topographic representations on surface energy balance, turbulent heat flux, and scalar (co‐)variances in the Energy Exascale Earth System Model (E3SM) land model (ELM). Three sub‐grid topographic representations in ELM were compared: (a) the default sub‐grid structure (D), (b) the recently developed sub‐grid topographic structure (T), and (c) high spatial resolution (1KM). Additionally, two different solar radiation schemes in ELM were compared: (a) the default plane‐parallel radiative transfer scheme (PP) and (b) the parameterization scheme (TOP) that accounts for sub‐grid topographic effects on solar radiation. A series of offline simulations with the three grid discretization structures (D, T, and 1KM) and two schemes of solar radiation (TOP and PP) were carried out using the Sierra Nevada, California. 1KM simulations with TOP well capture the spatial heterogeneity of surface fluxes compared to Moderate Resolution Imaging Spectroradiometer remote sensing data. There are significant differences between TOP and PP in the 1‐km simulated surface energy balance, but the differences in mean values and standard deviations become small when aggregated to the grid scale (i.e., 0.5°). The T configuration better mimics the 1KM simulations with TOP than the D configuration and better captures the sub‐grid topographic effects on surface energy balance and boundary conditions. These results underline the importance of representing sub‐grid topographic heterogeneities in LSMs and motivate future research to understand the sub‐grid topographic effects on land‐atmosphere interactions over mountainous areas.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

TDycores-Project/TDycore

The terrestrial dycores will solve tightly coupled conservation of water and energy equations. While the land dycore will simulate processes for a three-dimensional subsurface coupled to a one-dimensional plant’s vascular system, the river dycore will simulate two-dimensional processes in the river.

Bisht, Gautam↗