Search NASA⌕ Search

Engineering topics

Biswas, S

Publications and source records attributed to Biswas, S.

Observation of flow vector fluctuations in p–Pb collisions at \(\sqrt{{s}_{NN}}=5.02\) TeV

Measurements of transverse momentum (pT) and pseudorapidity (η) dependent flow vector fluctuations in p–Pb collisions at $$\sqrt{{s}_{NN}}=5.02$$ TeV at the CERN Large Hadron Collider are presented. By studying long-range two-particle correlations with a template fit method, potential biases from non-flow effects such as jets and resonance decays are effectively suppressed. Significant pT- and η-dependent fluctuations of the second-harmonic flow vector are observed with more than 5σ confidence in p–Pb collisions, similar to the observations in Pb–Pb collisions. The influence of residual non-flow effects has been evaluated and cannot account for the observed fluctuations, thereby confirming the observation of flow vector fluctuations in small collision systems at the LHC. Comparisons to model calculations from 3DGlauber+MUSIC+UrQMD and the parton transport model from AMPT are also presented. The measurements provide constraints on the theoretical modelling of the three-dimensional initial geometry and its event-by-event fluctuations, offering critical insights into the origin of collective flow in small collision systems at the LHC.

Abdallah, D A H↗

Exploiting Data Similarity to Reduce Memory Footprints

Memory size has long limited large-scale applications on high-performance computing (HPC) systems. Since compute nodes frequently do not have swap space, physical memory often limits problem sizes. Increasing core counts per chip and power density constraints, which limit the number of DIMMs per node, have exacerbated this problem. Further, DRAM constitutes a significant portion of overall HPC system cost. Therefore, instead of adding more DRAM to the nodes, mechanisms to manage memory usage more efficiently - preferably transparently - could increase effective DRAM capacity and thus the benefit of multicore nodes for HPC systems. MPI application processes often exhibit significant data similarity. These data regions occupy multiple physical locations across the individual rank processes within a multicore node and thus offer a potential savings in memory capacity. These regions, primarily residing in heap, are dynamic, which makes them difficult to manage statically. Our novel memory allocation library, SBLLmalloc, automatically identifies identical memory blocks and merges them into a single copy. SBLLmalloc does not require application or OS changes since we implement it as a user-level library. Overall, we demonstrate that SBLLmalloc reduces the memory footprint of a range of MPI applications by 32.03% on average and up to 60.87%. Further, SBLLmalloc supports problem sizes for IRS over 21.36% larger than using standard memory management techniques, thus significantly increasing effective system size. Similarly, SBLLmalloc requires 43.75% fewer nodes than standard memory management techniques to solve an AMG problem.

97 MATHEMATICS AND COMPUTING↗

Fighting Fire with Fire: Modeling the Datacenter-Scale Effects of Targeted Superlattice Thermal Management

Local thermal hot-spots in microprocessors lead to worst case provisioning of global cooling resources, especially in large-scale systems. However, efficiency of cooling solutions degrade non-linearly with supply temperature, resulting in high power consumption and cost in cooling - 50 {approx} 100% of IT power. Recent advances in active cooling techniques have shown on-chip thermoelectric coolers (TECs) to be very efficient at selectively eliminating small hot-spots, where applying current to a superlattice film deposited between silicon and the heat spreader results in a Peltier effect that spreads the heat and lowers the temperature of the hot-spot significantly to improve chip reliability. In this paper, we propose that hot-spot mitigation using thermoelectric coolers can be used as a power management mechanism to allow global coolers to be provisioned for a better worst case temperature leading to substantial savings in cooling power. In order to quantify the potential power savings from using TECs in data center servers, we present a detailed power model that integrates on-chip dynamic and leakage power sources, heat diffusion through the entire chip, TEC and global cooler efficiencies, and all their mutual interactions. Our multiscale analysis shows that, for a typical data center, TECs allow global coolers to operate at higher temperatures without degrading chip lifetime, and thus save {approx}27% cooling power on average while providing the same processor reliability as a data center running at 288K.

97 MATHEMATICS AND COMPUTING↗

Fighting Fire with Fire: Superlattice Cooling of Silicon Hotspots to Reduce Global Cooling Requirements

The running costs of data centers are dominated by the need to dissipate heat generated by thousands of server machines. Higher temperatures are undesirable as they lead to premature silicon wear-out; in fact, mean time to failure has been shown to decrease exponentially with temperature (Black's law). Although other server components also generate heat, microprocessors still dominate in most server configurations and are also the most vulnerable to wearout as the feature sizes shrink. Even as processor complexity and technology scaling have increased the average energy density inside a processor to maximally tolerable levels, modern microprocessors make extensive use of hardware structures such as the load-store queue and other CAM-based units, and the peak temperatures on chip can be much worse than even the average temperature of the chip. In recent studies, it has been shown that hot-spots inside a processor can generate {approx} 800W/cm{sup 2} heat flux whereas the average heat flux is only 10-50W/cm{sup 2}, and due to this disparity in heat generation, the temperature in hot spots may be up to 30 C more than average chip temperature. The key problem processor hot-spots create is that in order to prevent some critical hardware structures from wearing out faster, the air conditioners in a data center have to be provisioned for worst case requirements. Worse yet, air conditioner efficiencies decrease exponentially as the desired ambient temperature decreases relative to the air outside. As a result, the global cooling costs in data centers, which nearly equals the IT equipment power consumption, are directly correlated with the maximum hot spot temperatures of processors, and there is a distinct requirement for a cooling technique to mitigate hot-spots selectively so that the global air conditioners can operate at higher, more efficient, temperatures. We observe that localized cooling via superlattice microrefrigeration presents exactly this opportunity whereby hot-spots can be cooled selectively and allow global coolers to operate at much more efficient temperatures. Recent advances in processor cooling technologies have demonstrated that thermoelectric coolers (TEC), which use a Peltier effect to form heat pumps, can be used to reduce the temperature of hot spots. By applying a thermoelectric cooler between the heat spreader and the processor die and applying current selectively at the hot spots, heat from the hot-spots can be spread much more efficiently. The ability to implement such thermoelectric coolers on a real silicon device has been demonstrated recently, albeit for small prototype chips. The key question then, that needs to be answered before such thermoelectric coolers can be integrated in commodity server processors, is 'What is the potential for superlattice microrefrigeration to reduce global cooling costs in data centers?'. In order to answer this question, we present a comprehensive analysis of the impact of thermoelectric coolers on global cooling costs. Our thermal analysis covers all aspects of cooling a server in a data center, and integrates on-chip dynamic and leakage power sources with a detailed heat diffusion model of a processor (that models the silicon to the thermoelectric cooler to the heat spreader and the heat sink) and finally the computer room air conditioner (CRAC) efficiency, as shown in Figure 1. In Section II, we present the components of the system model.

99 GENERAL AND MISCELLANEOUS↗

Investigation of photocatalytic activity of TiO{sub 2}/WO{sub 3} bilayered thin films with various amounts of WO{sub 3} exposed surface

Transparent WO{sub 3}/TiO{sub 2} bilayered thin films were deposited on glass substrates by facing target sputtering technique with different amounts of WO{sub 3} exposed surface (0%, 30%, 50%, 80%, and 100%) to study the separate role of WO{sub 3} and TiO{sub 2} in the photocatalytic activity of the composite system. The crystallographic and optical properties of WO{sub 3} and the TiO{sub 2} layers were investigated in detail. The photocatalytic activity was evaluated by the measurement of decomposition of methanol in gas phase under visible light irradiation with very little ultraviolet content. The rate of decomposition of gaseous methanol largely depends on the ratio of WO{sub 3}/TiO{sub 2} exposed surface. The decomposition efficiency of WO{sub 3}/TiO{sub 2} films increased with an increase in TiO{sub 2} exposed surface and the sample with 70%TiO{sub 2} exposed area showed the highest efficiency. The surface morphology of all the layers was investigated by the measurement of field emission scanning electron microscope and atomic force microscope. The variation in photocatalytic activity has been tried to be explained on the basis of methanol-photodecomposition mechanism and the intrinsic properties of WO{sub 3} and TiO{sub 2} semiconductor.

36 MATERIALS SCIENCE↗

Effect of substrate temperature on the facing target sputter deposited TiO{sub 2} photoelectrode of dye-sensitized solar cells

Nanocrystalline TiO{sub 2} photoelectrodes were successfully deposited on SnO{sub 2}:F coated glass substrate by facing target reactive sputtering technique with different substrate temperatures ranging from room temperature to 400 deg. C. Low cost chlorophylline based dye was used along with carbon paste on SnO{sub 2}:F glass as a counterelectrode. All the TiO{sub 2} electrodes show good crystallinity. It has been observed that increase of substrate temperature not only alters the ratio of anatase and rutile phase but it also markedly changes the crystal orientation. The amount of dye incorporation was found to be highly dependent on the microstructure of electrodes, as apparent from optical measurements. The dye-sensitized solar cells, comprised of TiO{sub 2} photoelectrode, deposited at substrate temperature of 200 deg. C, show maximum photoelectric conversion efficiency; however, further enhancement of sputtering temperature drastically reduces the efficiency. The variation of photoelectric conversion efficiency of the solar cells with TiO{sub 2} electrodes deposited at different substrate temperatures is discussed with the analysis of different microstructures of the TiO{sub 2} photoelectrodes and the corresponding dye incorporation. Moreover, all the dye-sensitized solar cells of this present investigation exhibit reasonably good fill factor value.

36 MATERIALS SCIENCE↗

Effect of annealing temperature on the photocatalytic activity of sol-gel derived TiO{sub 2} thin films

Transparent TiO{sub 2} thin films were deposited on glass substrates by a sol-gel dip coating technique, where crystallinity can be achieved at a relatively low annealing temperature. In this sol-gel preparation technique, acetic acid was used as a catalyst. Repetitive dip coating and drying, with a single annealing has made this technique easier to prepare TiO{sub 2} thin film with desired thickness within a short period of time. The crystallographic and optical properties of TiO{sub 2} films were investigated in detail. The photocatalytic activity was evaluated by the measurement of decomposition of methanol under UV-visible irradiation. The rate of decomposition of gaseous methyl alcohol depends on the structures and surface properties of the TiO{sub 2} films. The structure of the TiO{sub 2} films, prepared at various annealing temperatures, shows different crystallinities. Although crystallinity has been observed for 300 deg. C annealing temperature, it improved with increasing annealing temperature. The average transmittances of the TiO{sub 2} films slightly decrease with the increase of the annealing temperature in the range of 900-380 nm. The optical transmission edge of the TiO{sub 2} films, annealed at different annealing temperatures shifts toward higher wavelength with higher annealing temperature. All the as-deposited TiO{sub 2} films successfully photocatalyzed methanol to CO{sub 2} and H{sub 2}O, measured by Fourier transform infrared spectrometer. The decomposition efficiency of TiO{sub 2} films increased with decrease of annealing temperature. The surface morphology of all the samples was investigated by field emission scanning electron microscopy and atomic force microscopy measurements. The higher photocatalytic activity of the sample prepared at lower annealing temperature was explained by the effect of more porous structure with smaller grains and open surface morphology of the sample.

36 MATERIALS SCIENCE↗

Comparative study of photocatalytic activity in CdS-TiO{sub 2} thin films prepared by two different techniques

In this study, CdS layer in CdS-TiO{sub 2} bilayer films was fabricated by two different chemical bath deposition techniques: one with an ammonium complex as complexing agent and the other with sodium citrate as a substitute for the ammonium complex. The TiO{sub 2} upper layer was deposited by dc magnetron sputtering technique for both the CdS underlayers. The effect of postdeposition vacuum annealing was studied for both samples. The photocatalytic activity was evaluated by measuring the decomposition of methanol in gas phase under ultraviolet-visible irradiation. The CdS thin films, prepared by both techniques, show a highly oriented hexagonal structure. The optical transmission edge of the CdS thin films deposited by the ammonia-free technique is in lower wavelength than that of the other technique. For both techniques, vacuum annealing extends the absorption edge to higher wavelength, but this effect is more pronounced for the ammonia-content technique. The decomposition efficiency of the as-deposited CdS-TiO{sub 2} thin film prepared by the ammonia-free technique is much higher than the as-deposited CdS-TiO{sub 2} prepared by ammonia-content technique. In case of the ammonia-content technique, high-vacuum annealing improves the photocatalytic activity but it has minimal influence in the other technique. The surface morphology of all the CdS thin films was studied by field emission scanning electron microscopy and atomic force microscopy in order to find out the possible inherent reason that leads to a huge difference in the photocatalytic decomposition activity of CdS-TiO{sub 2} thin films.

36 MATERIALS SCIENCE↗

Crystal Structure of the Outer Membrane Protein OpdK from Pseudomonas aeruginosa

In Gram-negative bacteria that do not have porins, most water-soluble and small molecules are taken up by substrate-specific channels belonging to the OprD family. We report here the X-ray crystal structure of OpdK, an OprD family member implicated in the uptake of vanillate and related small aromatic acids. The OpdK structure reveals a monomeric, 18-stranded {beta} barrel with a kidney-shaped central pore. The OpdK pore constriction is relatively wide for a substrate-specific channel ({approx}8 Angstroms diameter), and it is lined by a positively charged patch of arginine residues on one side and an electronegative pocket on the opposite side--features likely to be important for substrate selection. Single-channel electrical recordings of OpdK show binding of vanillate to the channel, and they suggest that OpdK forms labile trimers in the outer membrane. Comparison of the OpdK structure with that of Pseudomonas aeruginosa OprD provides the first qualitative insights into the different substrate specificities of these closely related channels.

36 MATERIALS SCIENCE↗

Impact of petrographic properties on the burning behavior of pulverized coal using a drop tube furnace

The combustion behavior of three Indian coals of different rank with wide variation in ash content and maceral compositions were studied using a drop tube furnace (DTF). Each coal was pulverized into a specific size (80% below 200 mesh) and fed into the DTF separately. The DTF runs were carried out under identical conditions for all of the coals. The carbon burnout was found out from the chemical analyses of the feed coals and the char samples collected from different ports of the DTF. Char morphology analyses was carried on the burnout residues of the top port. The top port results show better burnout of the lower rank coals which however was not observed in the last port. An attempt has been made to account for this variation in terms of rank and petrographic parameters of the respective coals. 20 refs., 1 fig., 6 tabs.

01 COAL, LIGNITE, AND PEAT↗