Engineering topics

Blake, P. L.

Publications and source records attributed to Blake, P. L..

6 records

NASA NTRS1986

The removal of atmospheric effects from remotely sensed near-infrared spectral data

A technique has been developed for removing atmospheric effects from high-resolution remotely sensed 0.7-2.5-micron spectral data. This calibration technique relies solely on the raw spectra data for calibration information. Results are presented for a set of reflectance spectra for rock samples obtained at a distance of about 0.5 km using an InSb spectrophotometer. The calibration technique uses the depths of water-vapor absorption bands in the remotely obtained spectral data to estimate the degree to which atmospheric attenuation has affected these data.

Blake, P. L.↗

NASA NTRS1985

Position Paper: Workshop on Geologic Applications of Remote Sensing to the Study of Sedimentary Basins

The utility of LANDSAT Multispectral Scanner (MSS) and Thematic Mapper (TM) data for providing regional coverage has been demonstrated. Information derived from LANDSAT spectral data is varied, but has primarily been used for distinguishing materials in a scene. Because of the limited number and width of the MSS and TM bands, LANDSAT data has only limited utility for actual identification of materials. The new advanced sensors (currently airborne, but eventually shuttle-based) have more limited areal extent than LANDSAT, but greater spatial and spectral resolution. The Airborne Imaging Spectrometer (AIS) has spectral resolution of about .01 microns and, typically, has 10m/pixel spatial resolution. This improved spectral resolution means that diagnostic spectral features may now be identified, which in turn means that actual identification of mineral phases present can be addressed (of either monominerallic or composite materials). Another new sensor, the Thermal Infrared Multispectral Scanners (TMS), obtains data in the 8 to 12 micron range. The information from the various sensors (e.g., LANDSAT, AIS, and TIMS) is complementary, covering different wavelength regions and consequently sensitive to different materials or physical properties of materials. In addition, the new sensors also produce a higher volume of data, which must be cleverly and efficiently handled.

Blake, P. L.↗

NASA NTRS1985

Multisensor Data Integration Techniques

The availability of data from sensors operating in several different wavelength regions had led to the development of new techniques and strategies for both data management and image analysis. Work is ongoing to develop computer techniques for analysis of integrated data sets. These techniques include coregistration of multisensor images, rectification of radar images in areas of topographic relief to ensure pixel to pixel registration with planimetric data sets, calibration of data so that signatures can be applied to remote areas, normalization of data acquired with disparate sensors and determination of extended spectral signatures of surface units. In addition, software is being developed to analyze coregistrated digital terrain and image data so that automated stratigraphic and structural analyses can be performed. These software procedures include: strike and dip determination, terrain profile generation, stratigraphic column generation, stratigraphic thickness measurements, structural cross-section generation, and creation of 3-D block diagrams. These techniques were applied to coregistered LANDSAT 4 Thematic Mapper (TM), Thermal Infrared Multispectral Scanner (TIMS), and multipolarization synthetic aperture radar (SAR) data of the Wind River Basin in Wyoming.

Evans, D. L.↗

NASA NTRS1985

Planning for VRM: Radar and sonar studies of volcanic terrains on Earth, Venus and Mars

Venera 15 and 16 radar images of Venus, together with Earth based data from the Arecibo Observatory, indicate that volcanism has played an important role in the evolution of the Venusian landscape. At the end of this decade, NASA's Venus Radar Mapper (VRM) spacecraft will return near global information that will further constrain the planet's geologic history. Due to the diversity of volcano/tectonic features that have already been identified on Venus, and the intrinsic differences between radar images and conventional photography, additional expertise is being developed with which to interpret the VRM images of this unusual environment. Several attempts to better understand the physical characteristics of volcanic terrains are described here. Pioneer Venus radar altimeter measurements of topographic variability and surface roughness are compared with Goldstone radar measurements of volcanic terrains on Mars. Synthetic aperture radar images obtained by the SIR-B Space Shuttle experiment over Kilauea Volcano, Hawaii, are employed to investigate the differences in radar returns from pahoehoe, aa and sheet lava flows. Four polarization, multiple incidence angle, aircraft radar images of the Medicine Lake area of N. California are used to address the unusually high cross-polarization ratio of lobate flows around Beta Regio on Venus, as measured by the Arecibo radar.

Mouginis-Mark, P. J.↗

NASA NTRS1985

Sensitivity of current remote sensing instrumentation to diagnostic spectral features in geologic materials

The capability of some current remote sensing instruments to discriminate and identify geologic materials based on spectral reflectance in the visible and near-IR (0.4-2.6 microns) are studied. Laboratory reflectance spectra of selected geologic materials were convolved to the bandpasses of the Landsat 4 Thematic Mapper and the Shuttle Multispectral InfraRed Radiometer. As a secondary goal, spectral parameters which are particularly useful for exploring specific geological problems have been identified, as a guide both to the design of future sensors having a limited number of bandpasses, as well as to aid efficient analysis of large three-dimensional data sets returned by imaging spectrometers.

Singer, R. B.↗

NASA NTRS1984

Hypsometric studies of Mars.

Altitude data derived from the 12.6 cm radar measurements obtained at JPL's Goldstone Facility were used to explore the utility of this type of regional analysis and to develop criteria for the interpretation of hypsometric data for planets where no visual images are available. Examination of the radar-derived hypsogram for Mars shows that the unimodal distribution of elevations contains several second order peaks and is skewed toward a modal elevation of about 3.5 km above the 6.1 mb datum. Individual topographic features can be recognized from this hypsogram, but such interpretations are based on the known surface morphology that has been determined from spacecraft images. It is not yet known how, for example, cratered terrain, regional slopes or other morphological features could be identified using the hypsogram if no images were available for ground-truth. The role that large impact craters play in influencing the shape of a hypsogram is being studied.

Blake, P. L.↗