Search NASASearch

Engineering topics

Blake, R. L.

Publications and source records attributed to Blake, R. L..

Optical constants from mirror reflectivities measured at synchrotrons

Improved mirror reflectivity measurement techniques have been introduced to permit more accurate determinations of optical constants delta and beta in the complex index of refraction n = 1 - delta - i(beta) over the energy range 50 to 5000 eV. When the density has been determined by X-ray or other means, one can calculate the real and imaginary parts, f-prime and f-double prime, of the complex atomic scattering factor f = f(o) + f-prime + if-double prime from delta and beta. Preliminary results are given for the Ni LIII edge around 852 eV, and the Au M edge region from 2150 to 3500 eV. Since these are the first experimental evaluations of delta for these element edges, they are compared with appropriate reservations to semiempirical tabulations. There is much potential for this technique applied to synchrotron sources.

Blake, R. L.

Feasibility study of the use of synchrotron radiation in the calibration of AXAF - Initial reflectivity results

The 1-percent calibration accuracy goal of the Advanced X-ray Astrophysics Facility is being approached by way of an experiment at the National Synchrotron Light Source that will demonstrate the accuracy achievable in reflectance measurements conducted on coated flat mirrors in the 50 eV-12 keV energy range. The coatings will be of commercially produced Au, Ni, and Ir, deposited either by sputtering or by e-beam deposition. Optical constants will be estimated via the reflectance vs. angle-of-incidence method.

Graessle, D. E.

Analysis of magnesium XI line profiles from solar active regions

High-resolution solar spectra of the Mg XI 1s2 1S0-1s2p 1P1 resonance line at 9.169 A and the associated nearby satellite lines obtained from two rocket-borne crystal spectrometer measurements are presented. Comparisons with two independent sets of theoretical calculations for the 1s2nl-1s2pnl dielectronic satellite lines with n = 3-7 indicate electron temperatures of 4-4.5 million K. Measured line widths indicate either that the ion temperature exceeds the electron temperature by about a million K or that about 28 km/s of turbulence is present.

Blake, R. L.

Analysis of solar X-ray emission line profiles

The high spatial and spectral resolution solar X-ray observations of an active region in which an X-ray and radio gradual rise and fall was in progress are reported. The correlations of highly collimated X-ray scans with the magnetic data indicate the presence of a hot localized region of X-ray emission near the end of the magnetic neutral line. A thermal interpretation of the continuum observed from this region is consistent with an emission temperature of 3 x 10 to the 48th/cu cm and an electron temperature of 10 to the 7th K. A model of the temperature distribution of the X-ray emitting material within the collimator field of view is derived using the resonance lines of Ne X, Ne IX, and Fe XVII. Most of the emission measure is at temperatures less than 2,000,000 K, but some high-temperature material with an electron temperature between 5,000,000 K and 7,000,000 K is required.

Burek, A. J.

Random array grid collimators

The paper presents a general theory which predicts the angular response of a random array grid collimator (RAGC). Attention is given to two problems with pure random arrays: (1) there are strong wings in the response function and (2) the patterns are not self-supporting. The paper suggests restrictions on the randomness of the pattern which eliminate such problems with the disadvantage of putting an upper limit on the available throughput. It is reported that even in the worst case, the upper limit for a two-dimensional collimator is as high as 23%. Finally, suggestions are presented for easing the fabrication effort of the grids.

Fenimore, E. E.

An imaging X-ray spectrometer to study solar activity in conjunction with the SCADM program

An experiment is proposed to study solar active region dynamics and evolution. The experiment will employ an imaging X-ray spectrometer to study solar activity in conjunction with the SCADM program. A summary of the experiment is presented which includes the specifications and capabilities of the X-ray spectrometer, the scientific objectives, the method of approach, and a comparison of the experiment with other solar X-ray experiments. The experiment is proposed for use on the space shuttle due to its larger volume and weight capacity.

Blake, R. L.

Potential prediction needs in support of energy systems

The relationship between emerging energy systems and the natural environment is discussed, including selected examples to show that energy systems are tied to global solar terrestrial processess. The interdependence of resources, technology, and environmental impact is considered in terms of needed geophysical, atmospheric, and solar terrestrial data inputs. The need for long term basic research on the solar terrestrial system is emphasized.

Blake, R. L.

K-shell photoabsorption coefficients of O2, CO2, CO, and N2O

The total photoabsorption coefficient has been measured from 500 to 600 eV around the K edge of oxygen in gases O2, CO2, CO, and N2O by means of a gold continuum source and crystal spectrometer with better than 1-eV resolution. The cross sections are dominated by discrete molecular-orbital transitions below the K-edge energy. A few Rydberg transitions were barely detectable. Broad shape resonances appear at or above the K edge. Additional broad, weak features above the K edge possibly arise from shake up. Quantitative results are given that have about 10% accuracy except on the very strong peaks. All the measured features are discussed in relation to other related measurements and theory.

Barrus, D. M.

Diffraction effects on angular response of X-ray collimators

Angular responses have been measured for X-ray collimators with half-widths ranging from minutes of arc down to 10 arcsec. In the seconds-of-arc range, diffraction peaks at off-axis angles can masquerade as side lobes of the collimator angular response. Measurements and qualitative physical arguments lead to a rule of thumb for collimator design; namely, the angle of first minimum in the Fraunhofer single-slit diffraction pattern should be less than one-fourth of the collimator geometrical full-width at half-maximum intensity.

Blake, R. L.

Collimators for soft X-ray measurements

The development of X-ray grid collimators at the Los Alamos Scientific Laboratory is considered with attention given to grid design (patterns and artwork for masters, materials, layout of grid patterns), mounting techniques (index housings, L-bar and T-bar housings, U-housings, rectangular housings). Alignment techniques (adjustable frames and alignment telescope, adjustable frames and on-axis and off-axis telescopes) are considered along with test procedures (plane parallel X-ray beam, convolved response).

Blake, R. L.

Spectrometric properties of crystals for X-ray astronomy. I

Preliminary results are reported on measurements of X-ray reflection coefficients, rocking-curve width estimates, and factors that influence these for KAP, EDDT, and ADP crystals. The agreement between parameters measured in the authors' laboratory and others over a period of some ten years, and the uniformity among the authors' samples, indicate that KAP as commercially supplied is amenable to a single theoretical description. This permits application of X-ray diffraction theory, which outlined and compared to measurements with good agreement.

Burek, A. J.

High resolution solar X-ray studies

Two high resolution solar X-ray payloads and their launches on Aerobee rockets with pointing system are described. The payloads included 5 to 25A X-ray spectrometers, multiaperture X-ray cameras, and command box attitude control inflight by means of a television image radioed to ground. Spatial resolution ranged from five arc minutes to ten arc seconds and spectral resolution ranged from 500 to 3000. Several laboratory tasks were completed in order to achieve the desired resolution. These included (1) development of techniques to align grid collimators, (2) studies of the spectrometric properties of crystals, (3) measurements of the absorption coefficients of various materials used in X-ray spectrometers, (4) evaluation of the performance of multiaperture cameras, and (5) development of facilities.

Blake, R. L.

Solar X-ray photography with multiplex pin-hole camera

A scatter-hole X-ray camera has been designed and flown in a rocket to measure solar X radiation. Its distinguishing feature is that many single pin-hole images are allowed to overlap - a multiplexing approach that saves space, gives practical signal-to-fog ratio, and requires special object reconstruction techniques. It was possible to reconstruct the appearance of the dominant source of solar emission on the day of rocket flight with better than one arc minute resolution. The coronal X-ray region had the same general shape and intensity distribution as the associated calcium K-line region.

Blake, R. L.