Search NASASearch

Engineering topics

Blanchard, D. P.

Publications and source records attributed to Blanchard, D. P..

At least 19 records

Single agglutinates: A comparative study of compositions of agglutinitic glass, whole-grain, bulk soil, and FMR

Previous workers on single agglutinates have variously interpreted the composition of agglutinitic glass to represent impact melts of (1) bulk soil, (2) mixed components in finer sizes, and (3) microtargets. Separately, Papike has argued in favor of fusion of the finest fraction of bulk soils. Thirty-four single agglutinates were hand-picked from the mature Apollo 16 soil 61181 (I(sub s)/FeO = 82) and the FMR and chemical composition (INAA for Fe, Sc, Sm, Co, Ni, and Cr) of each agglutinate particle were measured. Thirteen of these single agglutinates were selected for electron beam microanalysis and imaging. Less than 1 micron spots were analyzed (for Na, Mg, Al, Si, P, S, K, Ca, Ti, Cr, Mn, Fe, Ni, and Ba) on pure glassy areas (approximately ten in each particle) selected on the basis of optical and BSE images (avoiding all clasts and inclusions) with an electron microprobe to obtain average glass compositions of each single agglutinate.

Basu, A.

Heterogeneous dissemination of projectile materials in the impact melts from Wabar crater, Saudi Arabia

The initial observations of Spencer (1933) that two distinct impact melts coexist at the 90-m-diameter Wabar crater, Saudi Arabia, is confirmed. A dark or 'black' melt contains on the order of 4 percent meteoritic contamination, while the transparent or 'white' melt contains less than 1 percent. The Fe/Ni ratios in both varieties exhibit considerable scatter on electron-microprobe scales, akin to those reported by others for metal spherules in the black melt. If the meteoritic component is subtracted, both melts are chemically very similar. Clasts engulfed by the Wabar melts were investigated also, as they represent the progenitor lithologies from which the melts formed. Bulk compositions for these clasts reveal subtle differences in modal feldspar content within the quartz-rich Wabar target. Both melts require that a minimum of two target lithologies be present in the Wabar melt zone.

Horz, F.

Tektite-like bodies at Lonar Crater, India - Implications for the origin of tektites

Homogeneous dense glass bodies (both irregular and splash form) with high silica contents (about 67 pct SiO2) occur in the vicinity of Lonar Crater, India. Their lack of microlites and mineral remnants and their uniform chemical composition virtually preclude a volcanic origin. They are similar to tektites reported in the literature. While such a close association of tektite-like bodies with impact craters is already known (Aouelloul Crater, Mauritania; Zhamanshin Crater, U.S.S.R.), the tektite-like bodies at Lonar Crater are unique in that they occur in an essentially basaltic terrain. Present geochemical data are consistent with these high silica glass bodies being impact melt products of two-thirds basalt and one-third local intertrappean sediment (chert). The tektite-like bodies of the impact craters Lonar, Zhamanshin, and Aouelloul are generally similar. Strong terrestrial geochemical signatures reflect the target rock REE patterns and abundance ratios and demonstrate their terrestrial origin resulting from meteorite impact, as has been suggested by earlier workers.

Murali, A. V.

Sampling the cometary nucleus

Three modes for obtaining samples of cometary material: remote sampling, hover mode sampling, and landed (anchored) sampling are discussed. For each mode, trade-offs involving complexity, risk factors, and cost must be analyzed for the spacecraft and the sampling system. Flyby results for comet Halley indicate heterogeneity in the cometary nucleus that could dictate sampling at several different locations. Coring drills, drive tubes, and specialized mantle sampling devices must operate at cold temperatures (100 to 180 K) without heating the sample. Sample selections must be accomodated by the sample return canister, which must also be protected from thermal excursions.

Clark, B. C.

Supporting planetary missions - The Space Station role

Spacecraft destined for interplanetary flight can be assembled, fueled, and tested near the Space Station, thus providing for spacecraft too large and/or massive for launch from earth on a single boost. The 28.5-deg-inclination orbit of the Station will, however, cause penalties for some missions. Another Station role is to recover sample returns from, e.g., Mars or a comet.

Blanchard, D. P.

Scientific objectives for a 1996 Mars Sample Return Mission

The Mars Sample Return Mission, designed to return a variety of surface and subsurface samples as well as atmospheric samples, is described. Primary information about the planet is essential to understanding its place in the evolution of the solar system. The most accurate landing techniques will be used to place the lander near geologically interesting features. A capable rover will be an essential element of the sample collection strategy to maximize the diversity of the samples. The sample collection and return systems will keep the samples at Mars ambient conditions or colder to preserve the abundances and distribution of volatile components. Planetary quarantine is an important consideration for both the Mars lander and the earth return vehicle. Quarantine procedures must be consistent with the primary objectives of the mission and must not compromise the investigations of the returned samples.

Blanchard, D. P.

Trace element concentrations in the isotopically unique Allende inclusion, EK 1-4-1

The bulk sample and mineral separates of the isotopically unique Allende inclusion, EK 1-4-1, are analyzed by instrumental neutron activation for the concentrations of REE, Sc, Fe, Co, Cr, Na, and Ir, and REE concentrations were also determined by mass spectrometric isotope dilution for two density separates. Results show that the inclusion is enriched in light REE compared to heavy REE with a positive Yb anomaly, and has a high Cr concentration, both of which indicate group II affinity, although EK 1-4-1 is a coarse-grained group I inclusion. On the other hand, high Ir, and Sc, and low FeO and Co concentrations were found in the bulk inclusion, and low Na concentrations were found in mineral separates, which indicate an affinity to group I. In addition, for melilite and pyroxene fractions REE, Sc, Co, and Fe were determined to have distributions that were substantially different from those observed for normal Allende type B inclusions.

Nagasawa, H.

Apollo 11 breccias and soils - Aluminous mare basalts or multi-component mixtures

This paper examines the chemistry of Apollo 11 welded breccias and soils and attempts to ascertain whether the compositional variations in these samples reflect the comminuted remains of an unsampled high alumina basalt, or whether they result from mixing of mare basalts with more aluminous highland components. The data show strong linear compositional trends that are not consistent with magmatic processes. Instead, they indicate two-component mixing involving high-K basalt and an already well-mixed soil component. This is consistent with impact mixing of soil with a high-K mare basalt unit that is stratigraphically above other mare basalt units.

Rhodes, J. M.

Rare earth elements in the sedimentary cycle - A pilot study of the first leg

The effects of source rock composition and climate on the natural abundances of rare elements (REE) in the first leg of the sedimentary cycle are evaluated using a study with Holocene fluvia sands. The medium grained sand fraction of samples collected from first order streams exclusively draining granitic plutons in Montana (semi-arid), Georgia (humid), and South Carolina (humid) are analyzed. It is found that the REE distribution patterns (but not the total absolute abundances) of the daughter sands are very similar, despite compositional differences between parent plutons. Averages of the three areas are determined to have a La/Lu ratio of about 103, showing a depletion of heavy REE with respect to an average granite (La/Lu = 79) or the composition of North American Shales (La/Lu = 55). However, the Eu/Sm ratio in sands from these areas is about 0.22, which is very close to this ratio in North American Shales (0.21), although the overall REE distribution of these sands is not similar to that of the North American Shales in any way. It is concluded that the major rock type, but neither its minor subdivisions nor the climate, controls the REE distribution patterns in first cycle daughter sands, although the total and the parent rock-normalized abundances of REE in sands from humid areas are much lower than those in sands from arid areas.

Basu, A.

Chemistry of Apollo 11 low-K mare basalts

A reexamination of the bulk major and trace element geochemistry of Apollo 11 low-K mare basalts is presented. New analyses are given for seven previously unanalyzed samples (10003, 10020, 10044, 10047, 10050, 10058, and 10062) and for two low-K basalts (10029 and 10092) and one high-K basalt (10071) for which comprehensive compositional data were previously lacking. The data show that three distinct magma types have been sampled, as proposed by Beaty and Albee (1978), and that these magma types are unrelated by near-surface crystal fractionation. Each magma type is characterized by distinctive magmaphile element ratios, which enable previously unclassified samples (10050 and 10062) to be assigned to an appropriate magma type.

Rhodes, J. M.

Remnants from the ancient lunar crust - Clasts from consortium breccia 73255

The paper examines analyses of clasts from consortium breccia 73255. It was shown that the basalts are high-alumina, and contain low, unfractionated abundances; the felsite is similar in major element composition and relative REE abundances to the felsites from 73215 and 12013; and the ANT materials are similar to the ANT clasts in other Apollo 17 breccias. Model calculations show that the pyroxene anorhosite has equilibrated with a very evolved liquid, and it is indicated that there was once a liquid with an evolved REE composition which was the parent of the pyroxene anorthosite.

Blanchard, D. P.

Manicouagan impact melt, Quebec. I - Stratigraphy, petrology, and chemistry

A sheet of clast-laden impact melt 230 m thick and 55 km in diameter forms an annular plateau surrounding an uplift of shocked anorthosite within the moderately eroded Manicouagan structure. Three gradational units of the melt sheet are characterized with respect to grain size, inclusions, texture, and mineralogy. The melt rocks as a group are chemically homogeneous with a bulk composition similar to that of latite and with no statistically significant regional chemical variations. The melt is not completely chemically homogeneous as a local mafic variant represented by two samples with poikilitic texture was found. These poikilitic rocks texturally resemble some Apollo 17 impact melt rocks and are inferred to have had a similar origin and thermal history.

Floran, R. J.

Major and trace element chemistry of Luna 24 samples from Mare Crisium

Atomic absorption spectrometry and instrumental neutron activation analysis were employed to analyze six Luna 24 soils for major and trace elements. The analysis revealed well-mixed soils, though size fractions of each of the soils showed quite dissimilar compositions. Thus the regolith apparently has not been extensively reworked. Noritic breccia admixed preferentially to the finest size fractions and differential comminution of one or more other soil components accounted for the observed elemental distributions as a function of grain size. The ferrobasalt composition and one or more components with higher MgO contents have been identified in the samples.

Blanchard, D. P.