Engineering topics

Blokland, W.

Publications and source records attributed to Blokland, W..

5 records

DOE OSTI2017

Digital phase demodulation for low-coherence interferometry-based fiber-optic sensors

In this paper, we describe a digital phase demodulation scheme for low-coherence interferometry-based fiber-optic sensors by employing a simple generation of phase-shifted signals at the interrogation interferometer. The scheme allows a real-time calibration process and offers capability of measuring large variations (up to the coherence of the light source) at the bandwidth that is only limited by the data acquisition system. Finally, the proposed phase demodulation method is analytically derived and its validity and performance are experimentally verified using fiber-optic Fabry–Perot sensors for measurement of strains and vibrations.

47 OTHER INSTRUMENTATION↗

DOE OSTI2017

Commissioning and First Results of the Electron Beam Profiler in the Main Injector at Fermilab

The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging and often depends on non-invasive techniques. One such technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. A device such as this is already in use at the Spallation Neutron Source at ORNL and a similar device has been installed in the Main Injector at Fermilab. Commissioning of the device is in progress with the goal of having it operational by the end of the year. The status of the commissioning and initial results will be presented

Thurman-Keup, R.↗

DOE OSTI2015

Installation Status of the Electron Beam Profiler for the Fermilab Main Injector

The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging and often depends on non-invasive techniques. One such technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. A device such as this is already in use at the Spallation Neutron Source at ORNL and the installation of a similar device is underway in the Main Injector at Fermilab. The present installation status of the electron beam profiler for the Main Injector will be discussed together with some simulations and test stand results.

43 PARTICLE ACCELERATORS↗

NASA NTRS1990

A study on diagnosability of space station ECLSS

The use is demonstrated of the Multigraph Architecture (MGA) for studies on the Environment Control and Life Support System (ECLSS). The objective was the following: (1) to create an updated set of models of the Potable Water Subsystem (PWS) by using the graphical model building tools of the Multigraph Programming Environment (MPE); (2) to derive a real time alarm simulator from the models; and (3) to demonstrate the effects of sensor allocation on the diagnosability of the PWS. This work may serve as a preliminary study for the detailed analysis of the sensor allocation and diagnosability problems in the ECLSS.

Padalkar, S.↗

NASA NTRS1988

Knowledge-based approach to system integration

To solve complex problems one can often use the decomposition principle. However, a problem is seldom decomposable into completely independent subproblems. System integration deals with problem of resolving the interdependencies and the integration of the subsolutions. A natural method of decomposition is the hierarchical one. High-level specifications are broken down into lower level specifications until they can be transformed into solutions relatively easily. By automating the hierarchical decomposition and solution generation an integrated system is obtained in which the declaration of high level specifications is enough to solve the problem. We offer a knowledge-based approach to integrate the development and building of control systems. The process modeling is supported by using graphic editors. The user selects and connects icons that represent subprocesses and might refer to prewritten programs. The graphical editor assists the user in selecting parameters for each subprocess and allows the testing of a specific configuration. Next, from the definitions created by the graphical editor, the actual control program is built. Fault-diagnosis routines are generated automatically as well. Since the user is not required to write program code and knowledge about the process is present in the development system, the user is not required to have expertise in many fields.

Blokland, W.↗