Search NASA⌕ Search

Engineering topics

Bobbitt, John

Publications and source records attributed to Bobbitt, John.

Material Developments for 3D/4D Additive Manufacturing (AM) Technologies

Additive Manufacturing (AM), or 3D printing, is a unique technology in which structurally complex objects can be easily manufactured. While AM allows for the creation of intricate 3D objects, these objects are inactive and motionless. With recent incorporation of a “pre-programmed functionality’’ to the 3D printed objects, a new concept has emerged, 4D printing. Specifically, the 4D printing technology enables a static 3D printed object to change its shape, functionality or property over time upon exposure to a specific stimulus such as heat, stress, light, pH, and moisture, etc. We designed and produced compact 3D/4D printable materials that can be used as (a) structural components of the unmanned aerial vehicles (UAVs), and (b) as hydrogen storage materials that supply hydrogen to a fuel cell to expand the operational reach, namely flight time, and endurance of the UA Vs.

36 MATERIALS SCIENCE↗

Extraction of Mercury Utilizing 3D Printed Media-Mercury Extraction Coalescer (MEC)

This project was undertaken to address the concern of mercury species present in chemical reprocessing facilities and environmental remediation sites. Typical elemental mercury removal is performed by steam stripping. As efficient as this process is, the vaporized elemental mercury is often condensed along with acidic condensate. The acidic conditions re-dissolve the elemental mercury, transferring it back into the aqueous stream, and undoing the energy-intensive steam stripping process. This project looked to design and produce a 3D printed component to act as a mercury vapor/liquid coalescer utilizing structural and chemical features to segregate elemental mercury from an aqueous solution or process offgas and improving elemental mercury retention and removal from the recirculated condensate stream. The aim of this project is to take inspiration from nature, for example the lotus leaf, and the advantage of advanced manufacturing techniques, in this case 3D printing, to produce a functional solution to a serious environmental issue, the accumulation of elemental mercury in aqueous environments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Extraction of Mercury Utilizing 3D Printed Media – Mercury Extraction Coalescer (MEC) (Revision 1)

This project was undertaken to address the concern of mercury species present in chemical reprocessing facilities and environmental remediation sites. Typical elemental mercury removal is performed by steam stripping. As efficient as this process is, the vaporized elemental mercury is often condensed along with acidic condensate. The acidic conditions re­-dissolve the elemental mercury, transferring it back into the aqueous stream, and undoing the energy-intensive steam stripping process. This project looked to design and produce a 3D printed component to act as a mercury vapor/liquid coalescer utilizing structural and chemical features to segregate elemental mercury from an aqueous solution or process offgas and improving elemental mercury retention and removal from the recirculated condensate stream.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Creating 3D Models With The Faro Scanner

The Faro Focus X 330 is a 3D scanner that combines numerous technologies in order to create a precise and life like 3D model. The technologies used by the scanner include: Time of flight (The scanner spins horizontally and vertically while emitting a class 1 laser; The laser beam then bounces off of an object and is captured by a sensor; An extremely precise chronometer tracks the beams flight time; The data is inputted into the simple formula: d=c*t/2). Point cloud system: The exact position of up to 976,000 points per second are registered and combined to form a complete model with up to ±1 mm at 330 m. Camera: Photos are taken of the surroundings that are combined to make a 165 megapixel image. The image is paired with the point cloud system. Scans have been taken of buildings 730-A and 781-A. These scans will be put into different virtual reality programs and used for tours and training. The scans also serve as a proof of concept for the Faro Focus X 330 as well as SRNL's ability to produce accurate scans with numerous useful applications. Work Scope Planning: Scanning will result in higher productivity and reduce the risk by identifying hazards; Blueprints and designs; 3D scans allow greater collaboration between engineers, construction crews, etc. by enabling them to compare blueprints to real time progress and make adjustments. Training and walk-downs: Scans can be made of places where access is not readily available, this could be due to its remote location or hazards such as radioactivity.

42 ENGINEERING↗

DOE-EM Science of Safety Robotics Challenge

During the week of August 22nd, 2016, over 150 technologists, stakeholders, and Department of Energy, Office of Environmental Management workers, met at DOE’s Portsmouth Gaseous Diffusion Plant in Ohio, for the EM Science of Safety Robotics Challenge.

42 ENGINEERING↗

GrayQb Single-Faced Version 2 Open Environment Test - 16344

The GrayQb{sup TM} Single Faced Version 2 (SF2) is a non-destructive examination device developed to generate radiation contour maps showing source locations and relative radiological levels present in an area under examination. This device allows for characterization of radioactively contaminated areas such as hot cells, gloveboxes, small and large rooms, hallways, and waste tanks. The goal of GrayQb{sup TM} (pronounced 'Gray Cube') is to provide a low cost easily deployable device to aid in the process of decontamination and decommissioning (D and D). The GrayQb{sup TM} SF2 device is approximately a six inch cube weighing seven (7) pounds composed of a tungsten shield with integrated collimator, radiation imaging medium (Phosphor Storage Plate), and digital camera. This paper details the design upgrades incorporated into the new version of the GrayQb{sup TM} SF2 device and the characterization testing of this upgraded device. Device results from controlled testing performed at the Savannah River Site (SRS) Health Physics Instrument Calibration Laboratory (HPICL) are presented, as well as results from the open environment field testing performed in the E-Area Low Level Waste Storage Area. Follow on work performed deploying the GrayQb SF2 device at the Hanford Plutonium Reclamation Facility (PRF) to assist in the radiological characterization of the canyon will also be presented. Testing of the redesigned GrayQb{sup TM} SF2 device demonstrated its ability to detect low energy isotopes, e.g. Am-241 and Pu-238, not only indoors in controlled environments with well-defined source locations, but also in open environment field areas with a significant high energy background. Additionally, it was demonstrated that the device could detect higher energy isotopes (Cs-137 and Co-60) in a controlled setting and with additional testing and/or modifications to device and software, would likely be able to detect these isotopes in the open environment field testing. Follow on 2015 work performed at Hanford proved GrayQb to be a useful tool in the radiological characterization of the PRF canyon. Distribution tendencies of the radiological hot spots were identified that provided insights which will assist in more efficient planning of the continued D and D effort. Hot spots were identified which can be targeted during the future D and D effort and used as markers during the NDA assessment to quantify the radiological environment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗