Engineering topics

Bobrek, Miljko

Publications and source records attributed to Bobrek, Miljko.

6 records

DOE OSTI2024

Calibration of the analog beam-signal hardware for the credited engineered beam power limit system at the Proton Power Upgrade Project at the Spallation Neutron Source

A programmable signal processor-based credited safety control that calculates pulsed beam power based on beam kinetic energy and charge was designed as part of the Proton Power Upgrade (PPU) project at the Spallation Neutron Source (SNS). The system must reliably shut off the beam if the average power exceeds 2.145 MW averaging over 60 seconds. System calibration requires pedigree in measurements, calibration setup, and calculations. This paper discusses the calibration of the analog beam signal components up to and including the Analog Digital Convertors (ADCs) for implementation into the Safety Programmable Logic Controllers (PLCs) and Field Programmable Gate Arrays (FPGAs).

Bobrek, Miljko↗

DOE OSTI2021

A Unified User-Friendly Instrument Control and Data Acquisition System for the ORNL SANS Instrument Suite

In an effort to upgrade and provide a unified and improved instrument control and data acquisition system for the Oak Ridge National Laboratory (ORNL) small-angle neutron scattering (SANS) instrument suite—biological small-angle neutron scattering instrument (Bio-SANS), the extended q-range small-angle neutron scattering diffractometer (EQ-SANS), the general-purpose small-angle neutron scattering diffractometer (GP-SANS)—beamline scientists and developers teamed up and worked closely together to design and develop a new system. We began with an in-depth analysis of user needs and requirements, covering all perspectives of control and data acquisition based on previous usage data and user feedback. Our design and implementation were guided by the principles from the latest user experience and design research and based on effective practices from our previous projects. In this article, we share details of our design process as well as prominent features of the new instrument control and data acquisition system. The new system provides a sophisticated Q-Range Planner to help scientists and users plan and execute instrument configurations easily and efficiently. The system also provides different user operation interfaces, such as wizard-type tool Panel Scan, a Scripting Tool based on Python Language, and Table Scan, all of which are tailored to different user needs. The new system further captures all the metadata to enable post-experiment data reduction and possibly automatic reduction and provides users with enhanced live displays and additional feedback at the run time. We hope our results will serve as a good example for developing a user-friendly instrument control and data acquisition system at large user facilities.

47 OTHER INSTRUMENTATION↗

DOE OSTI2018

Quantum-authenticated clock signal

The present disclosure is directed to a system and method of distributing time information to enable synchronization in an authenticated manner via a quantum channel. A source device may transmit a timing signal, T on a communication channel from the source device to a receiver device. The timing signal T may be include a time or times stored in memory or calculated using a previously agreed upon formula. The method may include transmitting a quantum system Q from the source device to the receiver device. The quantum system may be prepared in a randomly chosen state and may be measured by the receiver device in a randomly chosen measurement basis.

47 OTHER INSTRUMENTATION↗

DOE OSTI2018

WAND 2 —A versatile wide angle neutron powder/single crystal diffractometer

Wide Angle Neutron Diffractometer Squared is a high-flux versatile diffractometer with a 2-Dimensional Position Sensitive Detector at the High Flux Isotope Reactor. The instrument has strengths in both powder and single crystal diffraction. It is a unique instrument in the neutron scattering landscape of North America, and its capabilities are at least equal to similar instruments in the world.

47 OTHER INSTRUMENTATION↗

DOE OSTI2017

Real-time Cellular Activity Monitoring using LTE Radio Measurements

As the licensing and deployment of Long term evolution (LTE) systems are ramping up, the study of cellular activity in LTE systems is essential to better understand the spectrum needs and make informed decisions on mobile device (population) density over time. Currently, there are limited mechanisms to non-intrusively monitor mobile device density in real-time. Cellular carriers such as AT&T and Verizon harvest such data through their cell towers; however, this data is proprietary and the carriers restrict access due to privacy concerns. In this paper, we present a system that passively monitors the cellular activity and senses the mobile device density from collected LTE radio measurements without requiring private user information or provider support. This information can be extracted from the downlink control information messages in the LTE physical layer protocol. Downlink LTE radio signals are measured in our locality and analyzed to provide real-time insights to the cellular activity and mobile device count.

Olama, Mohammed M.↗

DOE OSTI2016

Real-time Urban Population Monitoring Using Pervasive Sensor Network

It is estimated that 50% of the global population lives in urban areas occupying just 0.4% of the Earth’s surface. Understanding urban activity constitutes monitoring population density and its changes over time, in urban environments. Currently, there are limited mechanisms to non-intrusively monitor population density in real-time. The pervasive use of cellular phones in urban areas is one such mechanism that provides a unique opportunity to study population density by monitoring the mobility patterns in near real-time. Cellular carriers such as AT&T harvest such data through their cell towers; however, this data is proprietary and the carriers restrict access, due to privacy concerns. In this work, we propose a system that passively senses the population density and infers mobility patterns in an urban area by monitoring power spectral density in cellular frequency bands using periodic beacons from each cellphone without knowing who and where they are located. A wireless sensor network platform is being developed to perform spectral monitoring along with environmental measurements. Algorithms are developed to generate real-time population density and mobility estimates. Data generated using this system is demonstrated for driving modeling and simulation for optimized transportation and aid in generating new understanding of urban infrastructure domains.

Killough, Stephen M.↗