Search NASA⌕ Search

Engineering topics

Boers, R.

Publications and source records attributed to Boers, R..

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Cloud top liquid water from lidar observations of marine stratocumulus

Marine stratus clouds were simultaneously observed by nadir Nd:YAG lidar measurements and in situ cloud physics measurements. A procedure was applied to derive the two-dimensional vertical cross section of the liquid water from within the cloud top lidar observations. A comparison to direct in-cloud liquid water observations gave good results. The liquid water retrieval was limited to an effective optical depth of 1.5. The true cloud optical thickness was also obtained from the retrieval procedure to a corresponding limit of 3.8. The optical thickness of the observed marine stratus clouds was predominantly below 3.0.

Spinhirne, J. D.↗
NASA NTRS1988

Large aperture scanning airborne lidar

A large aperture scanning airborne lidar facility is being developed to provide important new capabilities for airborne lidar sensor systems. The proposed scanning mechanism allows for a large aperture telescope (25 in. diameter) in front of an elliptical flat (25 x 36 in.) turning mirror positioned at a 45 degree angle with respect to the telescope optical axis. The lidar scanning capability will provide opportunities for acquiring new data sets for atmospheric, earth resources, and oceans communities. This completed facility will also make available the opportunity to acquire simulated EOS lidar data on a near global basis. The design and construction of this unique scanning mechanism presents exciting technological challenges of maintaining the turning mirror optical flatness during scanning while exposed to extreme temperatures, ambient pressures, aircraft vibrations, etc.

Smith, J.↗
NASA NTRS1988

Lidar observations of the planetary boundary layer during FASINEX

Data are presented on the planetary boundary layer (PBL) over the ocean acquired with an airborne downward-looking lidar during the Frontal Air-Sea Interaction Experiment (FASINEX) with the purpose of studying the impact of an ocean front on air-sea interactions. No changes in the PBL structure were detected by lidar. Lidar data were then used along with other readily available remotely-sensed data and a one-dimensional boundary-layer-growth model to infer the mean PBL moisture and temperature structure and to estimate the surface fluxes of heat and moisture.

Melfi, S. H.↗
NASA NTRS1987

Cold air outbreak during MASEX - Lidar observations and boundary-layer model test

Lidar observations of boundary-layer development during a cold air outbreak over the Atlantic Ocean were examined. Very rapid rise rates were measured in the first 20 km off the coast. A large region of partial cloudiness was found to exist between the totally clear region near shore and the overcast region far from the coast. As the layer became overcast, rise rate of the boundary layer tripled, suggesting a direct relation between cloudiness and entrainment. Boundary-layer evolution was reasonably well simulated by a simple slab model. The model was not capable of predicting the area of partial cloudiness, nor the region of rapid entrainment near the coast.

Boers, R.↗
NASA NTRS1986

Convective structure of the planetary boundary layer of the ocean during gale

The structure of the Planetary Boundary Layer (PBL) was measured, using an airborne lidar, over the Atlantic Ocean during several intensive observation periods of the Genesis of Atlantic Lows Experiment (GALE). Primary emphasis is on the understanding of the convective structure within the PBL during cold air outbreaks. Cold outbreaks generally occur in between the development of coastal storms; and behind a cold front sweeping down from Canada out across the Atlantic. As the cold dry air moves over the relatively warm ocean, it is heated and moistened. The transfer of latent and sensible heat during these events accounts for most of the heat transfer between the ocean and atmosphere during winter. Moistening of the PBL during these eventsis believed to be an important factor in determining the strength of development of the storm system which follows. In general, the more PBL moisture available as latent heat the higher the probability the storm will intensify. The major mechanism for vertical mixing of heat and mositure within the PBL is cellular convection. Knowlede of the organization and structure of the convection is important for understanding the process.

Melfi, S. H.↗
NASA NTRS1986

Lidar observations and modeling of cold air outbreaks during MASEX and GALE

As part of MASEX and GALE a number of research flights were carried out over the Marine Boundary Layer (MBL) during periods when extremely cold and dry continental air was flowing out over the warm coastal waters at the east coast of the U.S. Such periods, which are named cold air outbreaks are characterized by massive warming and moistening of the MBL resulting in rapid entrainment conditions. As the MBL deepens as a function of fetch over the ocean, clouds develop. The line of cloud formation typically follows the coast line closely as has been observed many times from satellite imagery. The backscatter data from the NASA Goddard airborne lidar, which was used to measure the depth of the MBL in great detail, is ideally suited to verify parametrized models of boundary layer growth rate. The data indicates that the deepening MBL gradually develops clouds at its top. Those clouds form an integral part of the MBL and exercise an important influence on the energy cycle within the MBL. It is suggested that the rapid entrainment observed during overcast conditions represent an increase in efficiency of conversion of available turbulence kinetic energy into entrainment energy.

Boers, R.↗
NASA NTRS1986

Lidar measurements of the atmospheric entrainment zone and the potential temperature jump across the top of the mixed layer

Lidar data of the atmospheric entrainment zone from six days of clear air convection obtained in central Illinois during July 1979 are presented. A new method to measure the potential temperature jump across the entrainment zone based on only one temperature sounding and continuous lidar measurements of the mixed layer height is developed. An almost linear dependence is found between the normalized entrainment rate and the normalized thickness of the entrainment zone.

Boers, R.↗
NASA NTRS1985

On the Improvement of Satellite Temperature Retrievals by Means of Boundary Layer Models

The improvement of the accuracy of the satellite temperature retrievals close to the Earth's surface by boundary layer models was determined. The simplest type of boundary layer models that only consider time changes in the mean boundary layer quantities such as equivalent potential temperature and specific humidity, but neglect the details of the turbulent structure in the interior of the layer were used. They can be run with relatively few externally specified parameters: surface wind speed and divergence rate. Model verifications studies show that under certain conditions the mean atmospheric structure can be simulated very well.

Boers, R.↗
NASA NTRS1984

Mixed Layers and Satellite Retrievals

As part of the process to determine whether it is possible to retrieve boundary layer structure with the current sounding techniques, temperature retievals were performed for radiosonde profiles that showed temperature inversions. It was found that when temperature inversions exceed 8 to 10 C a retrieval will indeed show a temperature increase with height over a limited vertical distance. For weaker inversions retrieved temperatures are generally smoothly decreasing with height. It is, however, impossible to determine the actual mixed layer height from the retrievals. Whether the water vapor channels could be used in observing mixed layer structure was investigated. Temperature inversions are accompanied by significant drops in relative humidity. While this effect is very pronounced in parts of the trade wind regimes with relative humidity drops of up to 60%, it is widespread in other areas of the ocean as well. A simulation experiment was performed in which brightness temperatures were computed for smooth temperature and humidity profiles and compared with those computed from inversion profiles.

Boers, R.↗
NASA NTRS1984

Lidar observations of mixed layer dynamics - Tests of parameterized entrainment models of mixed layer growth rate

Ground based lidar measurements of the atmospheric mixed layer depth, the entrainment zone depth and the wind speed and wind direction were used to test various parameterized entrainment models of mixed layer growth rate. Six case studies under clear air convective conditions over flat terrain in central Illinois are presented. It is shown that surface heating alone accounts for a major portion of the rise of the mixed layer on all days. A new set of entrainment model constants was determined which optimized height predictions for the dataset. Under convective conditions, the shape of the mixed layer height prediction curves closely resembled the observed shapes. Under conditions when significant wind shear was present, the shape of the height prediction curve departed from the data suggesting deficiencies in the parameterization of shear production. Development of small cumulus clouds on top of the layer is shown to affect mixed layer depths in the afternoon growth phase.

Boers, R.↗