Search NASA⌕ Search

Engineering topics

Boley, C D

Publications and source records attributed to Boley, C D.

Interaction of a high-power laser beam with metal sheets

Experiments with a high-power laser beam directed onto thin aluminum sheets, with a large spot size, demonstrate that airflow produces a strong enhancement of the interaction. The enhancement is explained in terms of aerodynamic effects. As laser heating softens the material, the airflow-induced pressure difference between front and rear faces causes the metal to bulge into the beam. The resulting shear stresses rupture the material and remove it at temperatures well below the melting point. The material heating is shown to conform to an elementary model. We present an analytic model of elastic bulging. Scaling with respect to spot size, wind speed, and material parameters is determined.

36 MATERIALS SCIENCE↗

Interaction of a High-Power Laser Beam with Metal Sheets

Experiments with a high-power laser beam directed onto thin aluminum sheets, with a large spot size, demonstrate that airflow produces a strong enhancement of the interaction. The enhancement is explained in terms of aerodynamic effects. As laser heating softens the material, the airflow-induced pressure difference between front and rear faces causes the metal to bulge into the beam. The resulting shear stresses rupture the material and remove it at temperatures well below the melting point. The material heating is shown to conform to an elementary model. We present an analytic model of elastic bulging. Scaling with respect to spot size, wind speed, and material parameters is determined.

42 ENGINEERING↗

Study of Laser Interaction with Thin Targets

For many targets of interest, the thickness is small compared to the conduction length during the engagement. In addition, the laser-material interaction region can be treated as flat. We have studied this regime with our 25 kW solid-state laser. We have demonstrated that airflow can reduce by approximately 40% the energy required to break through a thin target. This reduction is caused by the bulging of the softened material and the tearing and removal of the material by aerodynamic forces. We present elastic modeling which explains these results.

42 ENGINEERING↗

Large-Spot Material Interactions with a High-Power Solid-State Laser Beam

We study the material interactions produced by the beam of a 25-kW solid-state laser, in experiments characterized by relatively large spot sizes ({approx}3 cm) and the presence of airflow. The targets are iron or aluminum slabs, of thickness 1 cm. In the experiments with iron, we show that combustion plays an important role in heating the material. In the experiments with aluminum, we observe a sharp transition from no melting to complete melt-through as the intensity on target increases. A layer of paint greatly reduces the requirements for melt-through. We explain these effects and incorporate them into an overall computational model.

42 ENGINEERING↗