Search NASA⌕ Search

Engineering topics

Boncher, William Lawrence

Publications and source records attributed to Boncher, William Lawrence.

CMM Sequential Analysis Program

This report documents a design agency (DA) method to evaluate coordinate measuring machine (CMM) data by constructing an algorithm that is equivalent to the production agency (PA) algorithm for processing the raw CMM data. Several refinements of the CMM analyses were implemented at both the PA and the DA to process inherent limitations of the raw data, such as the absence of measurements at the exact ends of the connector-adapter assembly (CAA) and the recovery from these limitations through (worst-case) adjustments to the the positional errors. Also, inherent errors of the CMM measurements were accommodated by introducing a guard band, which effectively lowered the tolerance so that the CMM code could not pass bad parts. The DA and the PA showed remarkable agreement in all areas of analysis. The ultimate comparison is shown in Figures 13a and 13b, where the effect of using a guard band and end adjustments to the CMM measurements were clearly shown.

42 ENGINEERING↗

A Method for Extrapolating CMM Data

This report provides a method for evaluating coordinate measuring machine (CMM) data and extrapolating the data to estimate the dimensions of a cylindrical component beyond the sampled measurements. The theoretical basis is provided, and a calculational method is presented. The report also provides detailed, formatted, printed, and plotted representations.

36 MATERIALS SCIENCE↗

Sequestration of cerium(III) bromide into mesoporous silica

In this study, a variety of surface-functionalized mesoporous silica monoliths were reacted with a cerium(III) bromide molecular complex and a successful scaffold for luminescent materials is demonstrated. The variation in structure of the materials is shown through infrared spectroscopy, and the luminescent properties illustrate the varying coordination environment of cerium(III) bromide.

36 MATERIALS SCIENCE↗

Design study of a laser-cooled infrared sensor

The performance of a solid-state optical refrigerator is the result of a complex interplay of numerous optical and thermal parameters. We present a first preliminary study of an optical cryocooler using ray-tracing techniques. A numerical optimization identified a non-resonant cavity with astigmatism. This geometry offered more efficient pump absorption by the YLF:10%Yb laser-cooling crystal compared to non-resonant cavities without astigmatism that have been pursued experimentally so far. Ray tracing simulations indicate that ~80% of the incident pump light can absorbed for temperatures down to ~100 K. Calculations of heat loads, cooling power, and net payload heat lift are presented. They show that it is possible to cool a payload to a range of 90–100 K while producing a net payload heat lift of 80 mW and 300 mW when pumping a YLF:10%Yb crystal with 20 W and 50 W at 1020 nm, respectively. This performance is suited to cool HgCdTe infrared detectors that are used for sensing in the 8–12 μm atmospheric window. While the detector noise would be ~6× greater at 100 K than at 77 K, the laser refrigerator would introduce no vibrations and thus eliminate sources of microphonic noise that are limiting the performance of current systems.

47 OTHER INSTRUMENTATION↗